cdspVoiceParamEntry

CISCO-DSP-MGMT-MIB · .1.3.6.1.4.1.9.9.86.1.4.1.1

Object

row

An entry in the DSP table contains information
regarding a single DSP resource associated voice 
call setup parameters.
            
An entry in this table is created when a DSP is
detected and the DSP resource can be used by voice
applications. 
            
An entry in this table is deleted when the DSP
associated card/module is removed from the system. 
            
The 'entPhysicalClass' for the entry is 'other'.

Context

MIB: CISCO-DSP-MGMT-MIB
OID: .1.3.6.1.4.1.9.9.86.1.4.1.1
Type: row
Status: current
Parent: cdspVoiceParamTable
Table: cdspVoiceParamTable
Children: 17

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
cdspRtpSidPayloadType This object specifies the RTP (Real Time Protocol) payload type of the SID (Silence Insertion Descriptor) packet that is sent to the remote endpoint at the onset of silence supp…	column	Enumeration	`.1.3.6.1.4.1.9.9.86.1.4.1.1.1`
cdspRtcpXrControl This object controls if RTCPXR (Real Time Control Protocol Extended Report) is enabled. If this object is set to 'true', both transmission and reception of RTCPXR packets are ena…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.86.1.4.1.1.10`
cdspRtcpXrTransMultiplier This object is used to configure the RTCPXR report frequency. i.e. how many RTCP packets during the interval of every RTCPXR packet. The RTCPXR report is sent every 'cdspRtcpXrTra…	column	Unsigned32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.11`
cdspRtcpXrGminDefault This object is the default minimum gap value configured for the IP stream. This object is applicable only if 'cdspVqmControl' is set to 'rfc3611Vqm'.	column	Unsigned32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.12`
cdspRtcpXrExtRfactor This object is the external R factor metric value. The value 127 means it is not applicable. This object is applicable only if 'cdspVqmControl' is set to 'rfc3611Vq…	column	Unsigned32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.13`
cdspPktLossConcealment This object specifies the packet loss concealment: (1) none: No packet loss concealment applied (2) simple: Cisco Proprietary packet loss concealment (3) g711A1: IT…	column	Enumeration	`.1.3.6.1.4.1.9.9.86.1.4.1.1.14`
cdspVqmThreshSES This attribute specifies the threshold for Severely Errored Second on VQM. If the total number of milliseconds sampled as bad voice quality in one second period exceeds threshol…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.15`
cdspTransparentIpIp deprecated This attribute is used to enable or disable the transparent mode when establishing a non-transcoding IP-IP connection. The attribute does not apply for the transcoding IP-IP conne…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.86.1.4.1.1.16`
cdspVoiceModeIpIp This object specifies the voice mode for IP IP connections. normal : A normal Mode is a transcoding mode for IP-IP connections where the bearer properties will …	column	Enumeration	`.1.3.6.1.4.1.9.9.86.1.4.1.1.17`
cdspRtcpControl This objects controls if RTCP (Real Time Control Protocol) will be enabled. If this object is set to 'true', both transmission and reception of RTCP packets are enabled; otherwis…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.86.1.4.1.1.2`
cdspRtcpTransInterval This attribute specifies the RTCP report interval (defined in RFC1889). It indicates the interval in which the RTCP reports should be sent to the participating members. …	column	milliseconds Unsigned32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.3`
cdspRtcpRecvMultiplier This object specifies an approximate RTCP report interval (defined in RFC 1889) in milliseconds in which the RTCP reports should be sent to the participating members. …	column	Unsigned32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.4`
cdspVadAdaptive This attribute is used to enable or disable the Adaptive VAD knob of the VAD algorithm. Adaptive VAD works in conjunction with VAD Threshold (cvifcfgMusicOnHoldThreshold from CIS…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.86.1.4.1.1.5`
cdspDtmfPowerLevel This object specifies the power level of the low frequency component of DTMF. The power level of the high frequency component of DTMF is relative above or below the value specifi…	column	0.1 dBm Integer32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.6`
cdspDtmfPowerTwist This object specifies the relative power level of the high frequency component of DTMF. The low frequency group is always fixed to the value specified by cdspDtmfPowerLevel. When…	column	0.1 dB Integer32	`.1.3.6.1.4.1.9.9.86.1.4.1.1.7`
cdspRtcpTimerControl This object specifies when the RTCP receive timer is started. disabled - timer is disabled startImmediately - timer starts immediately …	column	Enumeration	`.1.3.6.1.4.1.9.9.86.1.4.1.1.8`
cdspVqmControl This object is used to disable VQM or enable either RFC 3611 RTCPXR or Extended Network Quality Metrics VQM. disable - VQM is disabled. rfc3611Vqm - RFC 3611 RTCPX…	column	Enumeration	`.1.3.6.1.4.1.9.9.86.1.4.1.1.9`

Indexes