cdspTotalDsp
CISCO-DSP-MGMT-MIB ·
.1.3.6.1.4.1.9.9.86.1.1.1.1.7
Object
column
Unsigned32
The total number of DSPs in the card.
Context
- MIB
- CISCO-DSP-MGMT-MIB
- OID
.1.3.6.1.4.1.9.9.86.1.1.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cdspCardStatusEntry
- Table
- cdspCardStatusTable
- Siblings
- 14
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-2048
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdspCardIndex The object corresponds to cardIndex in the chassis mib.
If value of this object is 0, then the entry is not
associated to cardIndex of the chassis mib. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.1 |
| cdspCongestedDsp The number of DSPs in the congested state (i.e
cdspOperstate is 'congested'). | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.10 |
| cdspNormalDsp The number of DSPs in the normal state (i.e
cdspOperstate is 'normal'). | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.11 |
| cdspNx64Dsp This object specifies the number of DSPs that need to be set
aside for making Nx64 calls.
The max value of this object is limited to the value of the
object 'cdspTotalDsp'.
… | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.12 |
| cdspCodecTemplateSupported This object indicates the codec template supported in DSP
image. The codec template can be:
tgw - Codec template for wireline used in
Trunking GateWay applicati… | column | Enumeration | .1.3.6.1.4.1.9.9.86.1.1.1.1.13 |
| cdspCardVideoPoolUtilization The object indicates the percentage of current DSP video
resource pool utilization of the card. | column | CISCO-QOS-PIB-MIBPercent | .1.3.6.1.4.1.9.9.86.1.1.1.1.14 |
| cdspCardVideoPoolUtilizationThreshold This object specifies the threshold of DSP video pool resource
usage.
When cdspCardVideoPoolUtilization crosses the value of this
threshold in the rising directio… | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.15 |
| cdspCardState The object indicates the current state of
DSP card being monitored.
normal - DSP card in normal condition.
warning - DSP card has some problem and need attention.
critical - DS… | column | Enumeration | .1.3.6.1.4.1.9.9.86.1.1.1.1.2 |
| cdspCardResourceUtilization The object indicates the percentage of current DSP
resource utilization of the card. The utilization is a
ratio of number of busy DSP resources (for handling calls,
transcoding,… | column | percent Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.3 |
| cdspCardLastHiWaterUtilization The object indicates the last high water mark of DSP
resource utilization. This object is reset to 0 after
DSP card is reset. | column | percent Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.4 |
| cdspCardLastResetTime The value of sysUpTime when the last DSP card reset
occurred. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.86.1.1.1.1.5 |
| cdspCardMaxChanPerDSP The maximum number of channels allowed in each DSP.
The value is chosen in an implementation-dependent
manner by the DSP functionality.
The value of 0 in this object indicates Cha… | column | channels SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.6 |
| cdspFailedDsp The number of DSPs in the failed state (i.e
cdspOperstate is 'failed') | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.8 |
| cdspDspSwitchOverThreshold This object specifies the threshold of DSP failures.
When 'cdspFailedDsp' reaches the value of this object,
the voice gateway switchover will occur.
The maximum value of… | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.1.1.1.9 |