cdot11SecAuxSsidWirelessNetId

CISCO-DOT11-SSID-SECURITY-MIB · .1.3.6.1.4.1.9.9.413.1.1.1.1.14

Object

column r/w Integer32

This object sets the Wireless Network ID of this
SSID.  This ID is used for Cisco GRE tunneling in
layer 3 switching.  The valid range for the ID is
'1' to '4096' and the default value is '0' and it 
indicates no ID is configured or used on this SSID.

Context

MIB: CISCO-DOT11-SSID-SECURITY-MIB
OID: .1.3.6.1.4.1.9.9.413.1.1.1.1.14
Type: column
Access: readwrite
Status: current
Parent: cdot11SecAuxSsidEntry
Table: cdot11SecAuxSsidTable
Siblings: 20

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-4096

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cdot11SecAuxSsid This object specifies a SSID defined on this IEEE 802.11 wireless LAN device. The SSID will be installed on the radio interfaces for client associations. The radio interface s…	column	CDot11SsidString	`.1.3.6.1.4.1.9.9.413.1.1.1.1.1`
cdot11SecAuxSsidLoginPassword This object specifies the password used for LEAP authentication association to an uplink AP while this SSID is in infra-structure mode, i.e. cdot11SecAuxSsidInfraStruct is 'true'.…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.413.1.1.1.1.10`
cdot11SecAuxSsidAuthKeyMgmt This object specifies the type of key management employed for encryption keys defined for the VLAN in cdot11SecAuxSsidVlan. WPA key management('wpa') should only be…	column	CDot11SecAuthKeyMgmtType	`.1.3.6.1.4.1.9.9.413.1.1.1.1.11`
cdot11SecAuxSsidAuthKeyMgmtOpt This object specifies if the type of key management, cdot11SecAuxSsidAuthKeyMgmt, selected is optional. If it is 'true' and cdot11SecAuxSsidAuthKeyMgmt is not 'none', the key …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.413.1.1.1.1.12`
cdot11SecAuxSsidRowStatus This is used to create a new SSID entry on this device, and modify or delete an existing SSID entry. Creation of rows must be done via 'createAndGo' with or with…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.413.1.1.1.1.13`
cdot11SecSsidRedirectAddrType This is the address type of for the cdot11SecSsidRedirectDestAddr.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.413.1.1.1.1.15`
cdot11SecSsidRedirectDestAddr This is the destination address set to all packets received from wireless clients associated to this wireless station using the cdot11SecAuxSsid. The cdot11SecSsidRedirectAddrT…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.413.1.1.1.1.16`
cdot11SecSsidRedirectFilter When the packet redirection feature is enable (i.e., cdot11SecSsidRedirectAddrType is 'ipv4' and cdot11SecSsidRedirectDestAddr value is not '00000000'H), this is the Cisco IP ext…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.413.1.1.1.1.17`
cdot11SecSsidInformationElement This is the set of Information Elements and extended capabilities embedded in the SSID broadcasted in beacons and probe responses. The extended capabilities 'advertisement' and '…	column	CDot11InformationElementType	`.1.3.6.1.4.1.9.9.413.1.1.1.1.18`
cdot11SecAuxSsidVlanName This is the name of the cdot11SecAuxSsidVlan. Either cdot11SecAuxSsidVlan or cdot11SecAuxSsidVlanName can be used to set the VLAN trunk for client traffic of this SSID. If both…	column	CDot11VlanName	`.1.3.6.1.4.1.9.9.413.1.1.1.1.19`
cdot11SecAuxSsidBroadcast This object indicates if an auxiliary SSID is a Broadcast SSID. There should only be one Broadcast SSID installed on any IEEE 802.11 radio interface if Multiple BSSID feature …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.413.1.1.1.1.2`
cdot11SecAuxSsidMbssidBroadcast This object controls if this SSID shall be broadcasted if MBSSID is enabled at the interface which this SSID is attached, i.e. if both cd11IfMultipleBssidEnable and cdot11SecAu…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.413.1.1.1.1.20`
cdot11SecAuxSsidMbssidDtimPeriod This is the DTIM period for this MBSSID enabled SSID. It is the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose …	column	beacons Integer32	`.1.3.6.1.4.1.9.9.413.1.1.1.1.21`
cdot11SecAuxSsidInfraStruct This object indicates if an auxiliary SSID is an infra-structure SSID. There should only be one infra-structure SSID installed on any IEEE 802.11 radio interface. The infra-st…	column	Enumeration	`.1.3.6.1.4.1.9.9.413.1.1.1.1.3`
cdot11SecAuxSsidProxyMobileIp This object indicates if an auxiliary SSID is enabled for Proxy Mobile-IP support. If Proxy Mobile-IP is not supported in VLAN network environment, cdot11SecAuxSsidVlan should …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.413.1.1.1.1.4`
cdot11SecAuxSsidMaxStations This object defines the maximum number of IEEE 802.11 stations which may associate to a radio interface through this SSID. If the value is '0', the maximum number is limited on…	column	Unsigned32	`.1.3.6.1.4.1.9.9.413.1.1.1.1.5`
cdot11SecAuxSsidVlan This object defines the VLAN trunk at which the traffic will be used when a client is associating with this SSID. The default value is '0', no VLAN is configured or used for t…	column	CISCO-DOT11-IF-MIBCDot11IfVlanIdOrZero	`.1.3.6.1.4.1.9.9.413.1.1.1.1.6`
cdot11SecAuxSsidWpaPsk This object configures Wi-Fi Protected Access Pre-shared Key for this SSID. This key is used for association authentication and dynamic encryption key generation. The default v…	column	CDot11WiFiPaPreSharedKey	`.1.3.6.1.4.1.9.9.413.1.1.1.1.7`
cdot11SecAuxRadiusAccounting This object defines the name of the AAA accounting list to be used for association accounting. The default value is an empty string if AAA accounting is not enabled.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.413.1.1.1.1.8`
cdot11SecAuxSsidLoginUsername This object specifies the username used for LEAP authentication and association to an uplink AP while this SSID is in infra-structure mode, i.e. cdot11SecAuxSsidInfraStruct is '…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.413.1.1.1.1.9`