cdot11SecAuxSsidInfraStruct
CISCO-DOT11-SSID-SECURITY-MIB ·
.1.3.6.1.4.1.9.9.413.1.1.1.1.3
Object
column
r/w
Enumeration
This object indicates if an auxiliary SSID
is an infra-structure SSID. There should only be
one infra-structure SSID installed on any IEEE
802.11 radio interface. The infra-structure
SSID is used for uplink association while the
radio interface cd11IfStationRole is roleWgb(1),
roleRepeater(5), roleNrBridge(9), or
roleApNrBridge(10).
infraStructure(1) - infra-structure SSID,
nonInfraStructure(2) - Non infra-structure SSID,
optional(3) - use of this infra-structure SSID
is optional for uplink connection.
Context
- MIB
- CISCO-DOT11-SSID-SECURITY-MIB
- OID
.1.3.6.1.4.1.9.9.413.1.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdot11SecAuxSsidEntry
- Table
- cdot11SecAuxSsidTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | infraStructure |
2 | nonInfraStructure |
3 | optional |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdot11SecAuxSsid This object specifies a SSID defined on this
IEEE 802.11 wireless LAN device. The SSID will
be installed on the radio interfaces for client
associations. The radio interface s… | column | CDot11SsidString | .1.3.6.1.4.1.9.9.413.1.1.1.1.1 |
| cdot11SecAuxSsidLoginPassword This object specifies the password used for
LEAP authentication association to an uplink
AP while this SSID is in infra-structure mode, i.e.
cdot11SecAuxSsidInfraStruct is 'true'.… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.10 |
| cdot11SecAuxSsidAuthKeyMgmt This object specifies the type of key management
employed for encryption keys defined for the VLAN
in cdot11SecAuxSsidVlan.
WPA key management('wpa') should only be… | column | CDot11SecAuthKeyMgmtType | .1.3.6.1.4.1.9.9.413.1.1.1.1.11 |
| cdot11SecAuxSsidAuthKeyMgmtOpt This object specifies if the type of key
management, cdot11SecAuxSsidAuthKeyMgmt,
selected is optional. If it is 'true' and
cdot11SecAuxSsidAuthKeyMgmt is not 'none',
the key … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.12 |
| cdot11SecAuxSsidRowStatus This is used to create a new SSID entry on this
device, and modify or delete an existing SSID
entry.
Creation of rows must be done via 'createAndGo'
with or with… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.413.1.1.1.1.13 |
| cdot11SecAuxSsidWirelessNetId This object sets the Wireless Network ID of this
SSID. This ID is used for Cisco GRE tunneling in
layer 3 switching. The valid range for the ID is
'1' to '4096' and the default … | column | Integer32 | .1.3.6.1.4.1.9.9.413.1.1.1.1.14 |
| cdot11SecSsidRedirectAddrType This is the address type of for the
cdot11SecSsidRedirectDestAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.413.1.1.1.1.15 |
| cdot11SecSsidRedirectDestAddr This is the destination address set to all packets
received from wireless clients associated to this
wireless station using the cdot11SecAuxSsid. The
cdot11SecSsidRedirectAddrT… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.413.1.1.1.1.16 |
| cdot11SecSsidRedirectFilter When the packet redirection feature is enable
(i.e., cdot11SecSsidRedirectAddrType is 'ipv4'
and cdot11SecSsidRedirectDestAddr value is not
'00000000'H), this is the Cisco IP ext… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.17 |
| cdot11SecSsidInformationElement This is the set of Information Elements and
extended capabilities embedded in the SSID
broadcasted in beacons and probe responses.
The extended capabilities 'advertisement' and '… | column | CDot11InformationElementType | .1.3.6.1.4.1.9.9.413.1.1.1.1.18 |
| cdot11SecAuxSsidVlanName This is the name of the cdot11SecAuxSsidVlan. Either
cdot11SecAuxSsidVlan or cdot11SecAuxSsidVlanName can
be used to set the VLAN trunk for client traffic of
this SSID. If both… | column | CDot11VlanName | .1.3.6.1.4.1.9.9.413.1.1.1.1.19 |
| cdot11SecAuxSsidBroadcast This object indicates if an auxiliary SSID
is a Broadcast SSID. There should only be one
Broadcast SSID installed on any IEEE 802.11
radio interface if Multiple BSSID feature … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.2 |
| cdot11SecAuxSsidMbssidBroadcast This object controls if this SSID shall be
broadcasted if MBSSID is enabled at the interface
which this SSID is attached, i.e.
if both cd11IfMultipleBssidEnable and
cdot11SecAu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.20 |
| cdot11SecAuxSsidMbssidDtimPeriod This is the DTIM period for this MBSSID enabled SSID.
It is the number of beacon intervals that shall elapse
between transmission of Beacons frames containing a
TIM element whose … | column | beacons Integer32 | .1.3.6.1.4.1.9.9.413.1.1.1.1.21 |
| cdot11SecAuxSsidProxyMobileIp This object indicates if an auxiliary SSID
is enabled for Proxy Mobile-IP support. If
Proxy Mobile-IP is not supported in VLAN
network environment, cdot11SecAuxSsidVlan should
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.4 |
| cdot11SecAuxSsidMaxStations This object defines the maximum number of IEEE
802.11 stations which may associate to a radio
interface through this SSID. If the value
is '0', the maximum number is limited on… | column | Unsigned32 | .1.3.6.1.4.1.9.9.413.1.1.1.1.5 |
| cdot11SecAuxSsidVlan This object defines the VLAN trunk at which the
traffic will be used when a client is associating
with this SSID. The default value is '0', no
VLAN is configured or used for t… | column | CISCO-DOT11-IF-MIBCDot11IfVlanIdOrZero | .1.3.6.1.4.1.9.9.413.1.1.1.1.6 |
| cdot11SecAuxSsidWpaPsk This object configures Wi-Fi Protected Access
Pre-shared Key for this SSID. This key is used
for association authentication and dynamic
encryption key generation. The default v… | column | CDot11WiFiPaPreSharedKey | .1.3.6.1.4.1.9.9.413.1.1.1.1.7 |
| cdot11SecAuxRadiusAccounting This object defines the name of the AAA accounting
list to be used for association accounting. The
default value is an empty string if AAA accounting
is not enabled. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.8 |
| cdot11SecAuxSsidLoginUsername This object specifies the username used for
LEAP authentication and association to an uplink
AP while this SSID is in infra-structure mode, i.e.
cdot11SecAuxSsidInfraStruct is '… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.9 |