cdot11SecAuxSsidAuthKeyMgmt
CISCO-DOT11-SSID-SECURITY-MIB ·
.1.3.6.1.4.1.9.9.413.1.1.1.1.11
Object
column
r/w
CDot11SecAuthKeyMgmtType
This object specifies the type of key management
employed for encryption keys defined for the VLAN
in cdot11SecAuxSsidVlan.
WPA key management('wpa') should only be selected
when encryption is TKIP or AES-CCMP and
authentication is open, i.e.
dot11AuthenticationAlgorithmsIndex is
openSystem(1), together either with EAP or
WPA-PSK for this SSID.
CCKM key management('cckm') can be used with encryption
TKIP, WEP, CKIP, and Network-EAP authentication
for this SSID.
The value 'wpa1' should be selected only
when encryption is TKIP.
The value 'wpa2' should be selected only when
encryption is either TKIP or AES-CCMP.
If none of the bits are set, there is no run-time
key management for this SSID.
Context
- MIB
- CISCO-DOT11-SSID-SECURITY-MIB
- OID
.1.3.6.1.4.1.9.9.413.1.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdot11SecAuxSsidEntry
- Table
- cdot11SecAuxSsidTable
- Siblings
- 20
Syntax
CDot11SecAuthKeyMgmtType
- Source
- CDot11SecAuthKeyMgmtType
- Base type
Bits
Values & Constraints
Type Values
0 | cckm |
1 | wpa |
2 | wpa1 |
3 | wpa2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdot11SecAuxSsid This object specifies a SSID defined on this
IEEE 802.11 wireless LAN device. The SSID will
be installed on the radio interfaces for client
associations. The radio interface s… | column | CDot11SsidString | .1.3.6.1.4.1.9.9.413.1.1.1.1.1 |
| cdot11SecAuxSsidLoginPassword This object specifies the password used for
LEAP authentication association to an uplink
AP while this SSID is in infra-structure mode, i.e.
cdot11SecAuxSsidInfraStruct is 'true'.… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.10 |
| cdot11SecAuxSsidAuthKeyMgmtOpt This object specifies if the type of key
management, cdot11SecAuxSsidAuthKeyMgmt,
selected is optional. If it is 'true' and
cdot11SecAuxSsidAuthKeyMgmt is not 'none',
the key … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.12 |
| cdot11SecAuxSsidRowStatus This is used to create a new SSID entry on this
device, and modify or delete an existing SSID
entry.
Creation of rows must be done via 'createAndGo'
with or with… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.413.1.1.1.1.13 |
| cdot11SecAuxSsidWirelessNetId This object sets the Wireless Network ID of this
SSID. This ID is used for Cisco GRE tunneling in
layer 3 switching. The valid range for the ID is
'1' to '4096' and the default … | column | Integer32 | .1.3.6.1.4.1.9.9.413.1.1.1.1.14 |
| cdot11SecSsidRedirectAddrType This is the address type of for the
cdot11SecSsidRedirectDestAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.413.1.1.1.1.15 |
| cdot11SecSsidRedirectDestAddr This is the destination address set to all packets
received from wireless clients associated to this
wireless station using the cdot11SecAuxSsid. The
cdot11SecSsidRedirectAddrT… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.413.1.1.1.1.16 |
| cdot11SecSsidRedirectFilter When the packet redirection feature is enable
(i.e., cdot11SecSsidRedirectAddrType is 'ipv4'
and cdot11SecSsidRedirectDestAddr value is not
'00000000'H), this is the Cisco IP ext… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.17 |
| cdot11SecSsidInformationElement This is the set of Information Elements and
extended capabilities embedded in the SSID
broadcasted in beacons and probe responses.
The extended capabilities 'advertisement' and '… | column | CDot11InformationElementType | .1.3.6.1.4.1.9.9.413.1.1.1.1.18 |
| cdot11SecAuxSsidVlanName This is the name of the cdot11SecAuxSsidVlan. Either
cdot11SecAuxSsidVlan or cdot11SecAuxSsidVlanName can
be used to set the VLAN trunk for client traffic of
this SSID. If both… | column | CDot11VlanName | .1.3.6.1.4.1.9.9.413.1.1.1.1.19 |
| cdot11SecAuxSsidBroadcast This object indicates if an auxiliary SSID
is a Broadcast SSID. There should only be one
Broadcast SSID installed on any IEEE 802.11
radio interface if Multiple BSSID feature … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.2 |
| cdot11SecAuxSsidMbssidBroadcast This object controls if this SSID shall be
broadcasted if MBSSID is enabled at the interface
which this SSID is attached, i.e.
if both cd11IfMultipleBssidEnable and
cdot11SecAu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.20 |
| cdot11SecAuxSsidMbssidDtimPeriod This is the DTIM period for this MBSSID enabled SSID.
It is the number of beacon intervals that shall elapse
between transmission of Beacons frames containing a
TIM element whose … | column | beacons Integer32 | .1.3.6.1.4.1.9.9.413.1.1.1.1.21 |
| cdot11SecAuxSsidInfraStruct This object indicates if an auxiliary SSID
is an infra-structure SSID. There should only be
one infra-structure SSID installed on any IEEE
802.11 radio interface. The infra-st… | column | Enumeration | .1.3.6.1.4.1.9.9.413.1.1.1.1.3 |
| cdot11SecAuxSsidProxyMobileIp This object indicates if an auxiliary SSID
is enabled for Proxy Mobile-IP support. If
Proxy Mobile-IP is not supported in VLAN
network environment, cdot11SecAuxSsidVlan should
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.413.1.1.1.1.4 |
| cdot11SecAuxSsidMaxStations This object defines the maximum number of IEEE
802.11 stations which may associate to a radio
interface through this SSID. If the value
is '0', the maximum number is limited on… | column | Unsigned32 | .1.3.6.1.4.1.9.9.413.1.1.1.1.5 |
| cdot11SecAuxSsidVlan This object defines the VLAN trunk at which the
traffic will be used when a client is associating
with this SSID. The default value is '0', no
VLAN is configured or used for t… | column | CISCO-DOT11-IF-MIBCDot11IfVlanIdOrZero | .1.3.6.1.4.1.9.9.413.1.1.1.1.6 |
| cdot11SecAuxSsidWpaPsk This object configures Wi-Fi Protected Access
Pre-shared Key for this SSID. This key is used
for association authentication and dynamic
encryption key generation. The default v… | column | CDot11WiFiPaPreSharedKey | .1.3.6.1.4.1.9.9.413.1.1.1.1.7 |
| cdot11SecAuxRadiusAccounting This object defines the name of the AAA accounting
list to be used for association accounting. The
default value is an empty string if AAA accounting
is not enabled. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.8 |
| cdot11SecAuxSsidLoginUsername This object specifies the username used for
LEAP authentication and association to an uplink
AP while this SSID is in infra-structure mode, i.e.
cdot11SecAuxSsidInfraStruct is '… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.413.1.1.1.1.9 |