ciscoDlswTConnConfigSapList
CISCO-DLSW-MIB ·
.1.3.6.1.4.1.9.10.9.1.2.2.1.9
Object
column
OctetString
The SAP list indicates which SAPs are advertised to
the transport connection defined by the local peer whose
transport address is given by ciscoDlswTConnConfigLocalTAddr.
The SAP list is configured on the local peer, and the SAP list
is sent to other peers via capabilities exchange.
The SAP list represents the SAPs specified via the configuration
command:
dlsw icanreach saps X
or
dlsw icannotreach saps X
Where X is in the range 0-FE.
Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the next most significant
bit representing the SAP 2, to the least significant
bit of the last octet representing the SAP 254. Data
link switching is allowed for those SAPs which have
one in its corresponding bit, not allowed otherwise.
The whole SAP list has to be changed together. Changing
the SAP list affects only new circuit establishments
and has no effect on established circuits.
This list can be used to restrict specific partners
from knowing about all the SAPs used by DLSw on all its
interfaces (these are represented in ciscoDlswIfSapList for
each interface). For instance, one may want to run NetBIOS
with some partners but not others.
If a node supports sending run-time capabilities exchange
messages, changes to this object should cause that action.
It is up to the implementation exactly when to start the
run-time capabilities exchange.
The DEFVAL below indicates support for all SAPs.
Context
- MIB
- CISCO-DLSW-MIB
- OID
.1.3.6.1.4.1.9.10.9.1.2.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoDlswTConnConfigEntry
- Table
- ciscoDlswTConnConfigTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 16-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoDlswTConnConfigIndex The index to the conceptual row of the table.
Non-positive numbers are not allowed. There
are objects defined that point to conceptual
rows of this table with this index value.
Z… | column | Integer32 | .1.3.6.1.4.1.9.10.9.1.2.2.1.1 |
| ciscoDlswTConnConfigAdvertiseMacNB The value of true indicates that defined local MAC
addresses and NetBIOS names will be advertised to a
partner node via initial and (if supported) run-time
capabilities exchange… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.9.1.2.2.1.10 |
| ciscoDlswTConnConfigInitCirRecvWndw The initial circuit receive pacing window size, in the unit
of SSP messages, to be used for future transport connections
activated using this table row. The managed node sends th… | column | SSP messages Integer32 | .1.3.6.1.4.1.9.10.9.1.2.2.1.11 |
| ciscoDlswTConnConfigOpens Number of times transport connections entered
connected state according to the definition of
this conceptual row. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.9.1.2.2.1.12 |
| ciscoDlswTConnConfigRowStatus This object is used by a Management Station to create
or delete the row entry in the ciscoDlswTConnConfigTable
following the RowStatus textual convention. The value
of notInServi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.9.1.2.2.1.13 |
| ciscoDlswTConnConfigTDomain The object identifier which indicates the transport
domain of this conceptual row. | column | ObjectIdentifier | .1.3.6.1.4.1.9.10.9.1.2.2.1.2 |
| ciscoDlswTConnConfigLocalTAddr The local transport address for this conceptual row
of the transport connection definition. | column | TAddress | .1.3.6.1.4.1.9.10.9.1.2.2.1.3 |
| ciscoDlswTConnConfigRemoteTAddr The remote transport address. Together with the
ciscoDlswTConnConfigRemoteTAddrMask, the object instance
of this conceptual row identifies a collection of
the transport connectio… | column | TAddress | .1.3.6.1.4.1.9.10.9.1.2.2.1.4 |
| ciscoDlswTConnConfigLastModifyTime The value of ciscoDlswUpTime when the value of any object in
this conceptual row was last changed. This value may
be compared to ciscoDlswTConnOperConnectTime to determine
whethe… | column | DlswTimeStamp | .1.3.6.1.4.1.9.10.9.1.2.2.1.5 |
| ciscoDlswTConnConfigEntryType The object instance signifies the type of entry in the
associated conceptual row. The value of `individual'
means that the entry applies to a specific partner DLSw
node as identi… | column | Enumeration | .1.3.6.1.4.1.9.10.9.1.2.2.1.6 |
| ciscoDlswTConnConfigGroupDefinition For conceptual rows of `individual' and `global' as
specified in ciscoDlswTConnConfigEntryType, the instance
of this object is `0.0'. For conceptual rows of
`group', the instanc… | column | SNMPv2-TCInstancePointer | .1.3.6.1.4.1.9.10.9.1.2.2.1.7 |
| ciscoDlswTConnConfigSetupType This value of the instance of a conceptual row
identifies the behavior of the collection of
transport connections that this conceptual row
defines. The value of activePersistent,… | column | Enumeration | .1.3.6.1.4.1.9.10.9.1.2.2.1.8 |