dlepNeighborMetricsVac
CISCO-DLEP-MIB ·
.1.3.6.1.4.1.9.9.1060.1.3.1.1.17
Object
column
OctetString
The dlepNeighborMetricsVac, this data item contains radio Virtual-Access Number information.
Context
- MIB
- CISCO-DLEP-MIB
- OID
.1.3.6.1.4.1.9.9.1060.1.3.1.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dlepNeighborEntry
- Table
- dlepNeighborTable
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dlepNeighborSessionId The dlepNeighborSessionId, this data iteam contains
neighbor session id. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.1 |
| dlepNeighborMetricsCdrTx The dlepNeighbor radio Current Data Rate (Transmit) (CDRT),
thisi data item is used to indicate the rate at which the link
is currently operating for transmitting traffic. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.10 |
| dlepNeighborMetricsMdrRx The dlepNeighbor radio Maximum Data Rate (Receive) (MDRR),
this data item is used to indicate the maximum theoretical
data rate, in bits per second (bps), that can be achieved
whi… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.11 |
| dlepNeighborMetricsMdrTx The dlepNeighbor radio Maximum Data Rate (Transmit) (MDRT),
this data item is used to indicate the maximum theoretical
data rate, in bits per second, that can be achieved
while tr… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.12 |
| dlepNeighborMetricsRlqRx The dlepNeighbor Relative Link Quality (Receive) (RLQR),
This data item is used to indicate the quality of the link
to a destination for receiving traffic, with 0 meaning
’worst … | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.13 |
| dlepNeighborMetricsRlqTx The dlepNeighbor Relative Link Quality (Transmit) (RLQT),
This data item is used to indicate the quality of the link
to a destination for transmitting traffic, with 0 meaning
’wor… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.14 |
| dlepNeighborMetricsLatency The dlepNeighbor radio Latency to indicate the amount of
latency, in microseconds, on the link. The Latency value is
reported as transmission delay. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.15 |
| dlepNeighborMetricsResources The dlepNeighbor Resources (RES), this data item is used
to indicate the amount of finite resources available for data
transmission and reception at the destination as a percentag… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.16 |
| dlepNeighborMetricsMacAddress The dlepNeighbor MAC Address data item contains the address
of the destination on the remote node. | column | CISCO-TCCiscoNetworkAddress | .1.3.6.1.4.1.9.9.1060.1.3.1.1.18 |
| dlepNeighborSessionOperStatus The state of the dlep neighbor.
up - Connected and operational.
down - Not connected to a neighboring router or
administrative down.
forcedDown - Shut d… | column | Enumeration | .1.3.6.1.4.1.9.9.1060.1.3.1.1.19 |
| dlepNeighborInterfaceIndex The dlepneighborInterfaceIndex, this data item contains
Neighbor Interface Snmp Index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.1060.1.3.1.1.2 |
| dlepNeighborInterfaceName The dlepNeighborInterfacename is the name of the interface
on which the DLEP session is established. | column | OctetString | .1.3.6.1.4.1.9.9.1060.1.3.1.1.3 |
| dlepNeighborAddress The dlepNeighborAddress, This data item contains
the IPv4 address of the destination. | column | CISCO-TCCiscoNetworkAddress | .1.3.6.1.4.1.9.9.1060.1.3.1.1.4 |
| dlepNeighborAddressV6LL The dlepNeighborAddressV6LL, This data item contains
the IPv6 Link Local address of the destination. | column | CISCO-TCCiscoNetworkAddress | .1.3.6.1.4.1.9.9.1060.1.3.1.1.5 |
| dlepNeighborAddressV6GBL The dlepNeighborAddressV6GBL, This data item contains
the IPv6 Global address of the destination. | column | CISCO-TCCiscoNetworkAddress | .1.3.6.1.4.1.9.9.1060.1.3.1.1.6 |
| dlepNeighborIpUpTime The dlepNeighbor, this data item contains the UpTime
of destination. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.1060.1.3.1.1.7 |
| dlepNeighborMetricsMTU The dlepNeighbor Maximum Transmission Unit (MTU), this
data item is used to indicate the maximum size, in octets,
of an IP packet that can be transmitted without fragmentation,
in… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.8 |
| dlepNeighborMetricsCdrRx The dlepNeighbor radio Current Data Rate (Receive) (CDRR),
this data item is used to indicate the rate at which the link
is currently operating for receiving traffic. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.3.1.1.9 |