dlepClientMetricsMTU

CISCO-DLEP-MIB · .1.3.6.1.4.1.9.9.1060.1.4.1.1.18
MIB view Table view

Object

column Integer32 
The dlepClient Maximum Transmission Unit (MTU), this
data item is used to indicate the maximum size, in octets,
of an IP packet that can be transmitted without fragmentation,
including headers, but excluding any lower-layer headers.

Context

MIB
CISCO-DLEP-MIB
OID
.1.3.6.1.4.1.9.9.1060.1.4.1.1.18
Type
column
Access
readonly
Status
current
Parent
dlepClientEntry
Table
dlepClientTable
Siblings
26

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dlepClientInterfaceIndex
The dlepClientInterfaceIndex, this data item contains client interface snmp index.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.9.9.1060.1.4.1.1.1
dlepClientMetricsCdrRx
The client radio Current Data Rate (Receive) (CDRR), this data item is used to indicate the rate at which the link is currently operating for receiving traffic.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.10
dlepClientMetricsCdrTx
The client radio Current Data Rate (Transmit) (CDRT), this data item is used to indicate the rate at which the link is currently operation for tansmiting traffic
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.11
dlepClientMetricsMdrRx
The dlepClient radio Maximum Data Rate (Receive) (MDRR), this data item is used to indicate the maximum theoretical data rate, in bits per second (bps), that can be achieved while…
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.12
dlepClientMetricsMdrTx
The dlepClient radio Maximum Data Rate (Transmit) (MDRT), this data item is used to indicate the maximum theoretical data rate, in bits per second, that can be achieved while tran…
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.13
dlepClientMetricsRlqRx
The dlepClient Relative Link Quality (Receive) (RLQR), This data item is used to indicate the quality of the link to a destination for receiving traffic, with 0 meaning ’worst qua…
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.14
dlepClientMetricsRlqTx
The dlepClient Relative Link Quality (Transmit) (RLQT), This data item is used to indicate the quality of the link to a destination for transmitting traffic, with 0 meaning ’worst…
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.15
dlepClientMetricsLatency
The dlepClient radio Latency to indicate the amount of latency, in microseconds, on the link. The Latency value is reported as transmission delay.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.16
dlepClientMetricsResources
The dlepClient Resources (RES), this data item is used to indicate the amount of finite resources available for data transmission and reception at the destination as a percentage,…
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.17
dlepClientPort
The dlepClientPort, this data item contains the TCP port number on the modem available for connections.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.19
dlepClientInterfaceName
The dlepClientInterfaceName, this data item contains Interface Name on which dlep client session is established.
columnOctetString.1.3.6.1.4.1.9.9.1060.1.4.1.1.2
dlepClientConfigVT
The dlepClientConfigVT, this data item contains number of Virtual Template.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.20
dlepClientConfigHeartBeat
The dlepClientConfigHeartBeat, this data item is used to specify a period in milliseconds for radio client heartbeat configuration.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.21
dlepClientConfigDeadInterval
The dlepClientConfigDeadInterval, this data item is used to specify a period in milliseconds for radio client dead interval configuration.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.22
dlepClientConfigTerminate
The dlepClientConfigTerminate, this data item contains radio client Teminate ack configuration inerval.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.23
dlepConfigNeighborDown
The dlepConfigNeighborDown, this data item contains radio neighbor down ack configuartion.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.24
dlepClientSessionOperStatus
The state of the dlep client session. up - Connected and operational. down - Not connected to a neighboring router or administrative down. forcedDown - …
columnEnumeration.1.3.6.1.4.1.9.9.1060.1.4.1.1.25
dlepClientMetricsSummary
The dlepClientMetricsSummary, this data item contains summary of client information. That is ClientIpaddress,RLQR,RLQT, CDRR,CDRT,MDRR,MDRT,Latency,Resource.
columnOctetString.1.3.6.1.4.1.9.9.1060.1.4.1.1.26
dlepClientConfigSummary
The dlepClientConfigSummary , this data item contails the information about client configuration that is Ipaddress,port,VirtualTemplate,HeartbeatTimer,DeadInterval, TerminateACK,N…
columnOctetString.1.3.6.1.4.1.9.9.1060.1.4.1.1.27
dlepClientPeerId
The dlepClientPeerId, this data item contains Client Peer Id.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.3
dlepNeighborCount
The dlepNeighborCount, this data item contains the number of neighbors connected to client.
columnInteger32.1.3.6.1.4.1.9.9.1060.1.4.1.1.4
dlepClientDescription
The dlepClientDescription, this data item contains the description of client
columnOctetString.1.3.6.1.4.1.9.9.1060.1.4.1.1.5
dlepClientAddressType
An indication of the type of address contained in the corresponding instance of dlepClientAddress.
columnCISCO-TCCiscoNetworkProtocol.1.3.6.1.4.1.9.9.1060.1.4.1.1.6
dlepClientLocalAddress
The dlepClientLocalAddress, this data item contains the Local Client Address.
columnCISCO-TCCiscoNetworkAddress.1.3.6.1.4.1.9.9.1060.1.4.1.1.7
dlepClientLocalRadioAddress
The dlepClientLocalRadioAddress, this data item contains the local client radio address.
columnCISCO-TCCiscoNetworkAddress.1.3.6.1.4.1.9.9.1060.1.4.1.1.8
dlepClientUpTime
The dlepClient UpTime, this data item contains client up time.
column-.1.3.6.1.4.1.9.9.1060.1.4.1.1.9