dlepClientMetricsLatency
CISCO-DLEP-MIB ·
.1.3.6.1.4.1.9.9.1060.1.4.1.1.16
Object
column
Integer32
The dlepClient radio Latency to indicate the amount of latency, in microseconds, on the link. The Latency value is reported as transmission delay.
Context
- MIB
- CISCO-DLEP-MIB
- OID
.1.3.6.1.4.1.9.9.1060.1.4.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dlepClientEntry
- Table
- dlepClientTable
- Siblings
- 26
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dlepClientInterfaceIndex The dlepClientInterfaceIndex, this data item contains
client interface snmp index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.1060.1.4.1.1.1 |
| dlepClientMetricsCdrRx The client radio Current Data Rate (Receive) (CDRR),
this data item is used to indicate the rate at which the link
is currently operating for receiving traffic. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.10 |
| dlepClientMetricsCdrTx The client radio Current Data Rate (Transmit) (CDRT),
this data item is used to indicate the rate at which the link
is currently operation for tansmiting traffic | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.11 |
| dlepClientMetricsMdrRx The dlepClient radio Maximum Data Rate (Receive) (MDRR),
this data item is used to indicate the maximum theoretical
data rate, in bits per second (bps), that can be achieved
while… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.12 |
| dlepClientMetricsMdrTx The dlepClient radio Maximum Data Rate (Transmit) (MDRT),
this data item is used to indicate the maximum theoretical
data rate, in bits per second, that can be achieved
while tran… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.13 |
| dlepClientMetricsRlqRx The dlepClient Relative Link Quality (Receive) (RLQR),
This data item is used to indicate the quality of the link
to a destination for receiving traffic, with 0 meaning
’worst qua… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.14 |
| dlepClientMetricsRlqTx The dlepClient Relative Link Quality (Transmit) (RLQT),
This data item is used to indicate the quality of the link
to a destination for transmitting traffic, with 0 meaning
’worst… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.15 |
| dlepClientMetricsResources The dlepClient Resources (RES), this data item is used
to indicate the amount of finite resources available for data
transmission and reception at the destination as a percentage,… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.17 |
| dlepClientMetricsMTU The dlepClient Maximum Transmission Unit (MTU), this
data item is used to indicate the maximum size, in octets,
of an IP packet that can be transmitted without fragmentation,
incl… | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.18 |
| dlepClientPort The dlepClientPort, this data item contains the TCP port
number on the modem available for connections. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.19 |
| dlepClientInterfaceName The dlepClientInterfaceName, this data item contains
Interface Name on which dlep client session is established. | column | OctetString | .1.3.6.1.4.1.9.9.1060.1.4.1.1.2 |
| dlepClientConfigVT The dlepClientConfigVT, this data item contains number of
Virtual Template. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.20 |
| dlepClientConfigHeartBeat The dlepClientConfigHeartBeat, this data item is used to
specify a period in milliseconds for radio client heartbeat
configuration. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.21 |
| dlepClientConfigDeadInterval The dlepClientConfigDeadInterval, this data item is used to
specify a period in milliseconds for radio client dead interval
configuration. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.22 |
| dlepClientConfigTerminate The dlepClientConfigTerminate, this data item contains
radio client Teminate ack configuration inerval. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.23 |
| dlepConfigNeighborDown The dlepConfigNeighborDown, this data item contains
radio neighbor down ack configuartion. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.24 |
| dlepClientSessionOperStatus The state of the dlep client session.
up - Connected and operational.
down - Not connected to a neighboring router or
administrative down.
forcedDown - … | column | Enumeration | .1.3.6.1.4.1.9.9.1060.1.4.1.1.25 |
| dlepClientMetricsSummary The dlepClientMetricsSummary, this data item contains summary
of client information. That is ClientIpaddress,RLQR,RLQT,
CDRR,CDRT,MDRR,MDRT,Latency,Resource. | column | OctetString | .1.3.6.1.4.1.9.9.1060.1.4.1.1.26 |
| dlepClientConfigSummary The dlepClientConfigSummary , this data item contails
the information about client configuration that is
Ipaddress,port,VirtualTemplate,HeartbeatTimer,DeadInterval,
TerminateACK,N… | column | OctetString | .1.3.6.1.4.1.9.9.1060.1.4.1.1.27 |
| dlepClientPeerId The dlepClientPeerId, this data item contains Client Peer Id. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.3 |
| dlepNeighborCount The dlepNeighborCount, this data item contains the number
of neighbors connected to client. | column | Integer32 | .1.3.6.1.4.1.9.9.1060.1.4.1.1.4 |
| dlepClientDescription The dlepClientDescription, this data item contains
the description of client | column | OctetString | .1.3.6.1.4.1.9.9.1060.1.4.1.1.5 |
| dlepClientAddressType An indication of the type of address contained in the
corresponding instance of dlepClientAddress. | column | CISCO-TCCiscoNetworkProtocol | .1.3.6.1.4.1.9.9.1060.1.4.1.1.6 |
| dlepClientLocalAddress The dlepClientLocalAddress, this data item contains the
Local Client Address. | column | CISCO-TCCiscoNetworkAddress | .1.3.6.1.4.1.9.9.1060.1.4.1.1.7 |
| dlepClientLocalRadioAddress The dlepClientLocalRadioAddress, this data item contains
the local client radio address. | column | CISCO-TCCiscoNetworkAddress | .1.3.6.1.4.1.9.9.1060.1.4.1.1.8 |
| dlepClientUpTime The dlepClient UpTime, this data item contains client up time. | column | - | .1.3.6.1.4.1.9.9.1060.1.4.1.1.9 |