cbQosQueueingCfgBandwidthUnits
CISCO-CLASS-BASED-QOS-MIB ·
.1.3.6.1.4.1.9.9.166.1.9.1.1.2
Object
column
QueueingBandwidthUnits
Units of the accompanying cbQosQueueingCfgbandwidth parameter
Context
- MIB
- CISCO-CLASS-BASED-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.166.1.9.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cbQosQueueingCfgEntry
- Table
- cbQosQueueingCfgTable
- Siblings
- 13
Syntax
QueueingBandwidthUnits
- Source
- QueueingBandwidthUnits
- Base type
Enumeration
Values & Constraints
Type Values
1 | kbps |
2 | percentage |
3 | percentageRemaining |
4 | ratioRemaining |
5 | perThousand |
6 | perMillion |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cbQosQueueingCfgBandwidth deprecated The type of bandwidth configuration value represented by this
object is indicated by the value of
cbQosQueueingCfgBandwidthUnits for this entry.
If the cbQosQueuei… | column | Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.1 |
| cbQosQueueingCfgAggregateQLimit Maximum allowed queue size for all the individual
queues associated with this class. When the queue size
exceed this value, the packets will be dropped. | column | CbQosQueueDepth | .1.3.6.1.4.1.9.9.166.1.9.1.1.10 |
| cbQosQueueingCfgAggrQLimitTime Maximum allowed queue size in milli-seconds for all
individual queues associated with this class. It
is internally converted to bytes by using the
bandwidth that is available for… | column | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.11 |
| cbQosQueueingCfgPriorityLevel The priority level of the queue into which packets matching
this class are queued into. A larger priority level indicates
higher priority. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.12 |
| cbQosQueueingCfgBandwidth64 This object indicates the guaranteed bandwidth for a particular
traffic class.
The type of bandwidth configuration value represented by this
object is indicated by … | column | CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.9.1.1.13 |
| cbQosQueueingCfgIndividualQSize64 Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
… | column | CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.9.1.1.14 |
| cbQosQueueingCfgFlowEnabled Boolean to indicate if flow-based fair-queue is
enabled for this class. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.166.1.9.1.1.3 |
| cbQosQueueingCfgPriorityEnabled Boolean to indicate if low latency queueing
(priority) is enabled for this class. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.166.1.9.1.1.4 |
| cbQosQueueingCfgAggregateQSize deprecated Maximum number of packets that can be held in all the
individual queues associated with this class
before packets are dropped.
cbQosQueueingCfgAggregateQSize object is superseded… | column | Packets Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.5 |
| cbQosQueueingCfgIndividualQSize deprecated Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
… | column | Packets Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.6 |
| cbQosQueueingCfgDynamicQNumber Number of dynamic queues supported when
flow-based fair-queue is in use. | column | Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.7 |
| cbQosQueueingCfgPrioBurstSize In the priority queue, this is the number of bytes
allowed in a single burst.
This parameter only makes sense if Priority is enabled | column | Bytes Unsigned32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.8 |
| cbQosQueueingCfgQLimitUnits Represents the unit type of
cbQosQueueingCfgAggregateQLimit object. | column | CbQosQueueUnitType | .1.3.6.1.4.1.9.9.166.1.9.1.1.9 |