cbQosQueueingCfgBandwidth64
CISCO-CLASS-BASED-QOS-MIB ·
.1.3.6.1.4.1.9.9.166.1.9.1.1.13
Object
column
CISCO-TCUnsigned64
This object indicates the guaranteed bandwidth for a particular
traffic class.
The type of bandwidth configuration value represented by this
object is indicated by the value of
cbQosQueueingCfgBandwidthUnits.
If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or
'percentage(2)', this object represents the configured
bandwidth allocated to this traffic class.In the case of a
bandwidth policy, this value represents a minimum bandwidth
guarantee for the traffic class. In the case of a priority
policy, this value represents the maximum rate at which
priority service is guaranteed.
If the cbQosQueueingCfgBandwidthUnits value is
'percentageRemaining(3)', this object represents the
the percentage of the unallocated bandwidth to allocate to
this class. If the cbQosQueueingCfgBandwidthUnits value is
'ratioRemaining(4)', this object represents the ratio value,
relative to other class' configured ratio values, used to
determine the portion of the unallocated bandwidth to apply to
this class.
If a device implements cbQosQueueingCfgBandwidth64, it should
not implement cbQosQueueingCfgBandwidth.
Context
- MIB
- CISCO-CLASS-BASED-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.166.1.9.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cbQosQueueingCfgEntry
- Table
- cbQosQueueingCfgTable
- Siblings
- 13
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cbQosQueueingCfgBandwidth deprecated The type of bandwidth configuration value represented by this
object is indicated by the value of
cbQosQueueingCfgBandwidthUnits for this entry.
If the cbQosQueuei… | column | Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.1 |
| cbQosQueueingCfgAggregateQLimit Maximum allowed queue size for all the individual
queues associated with this class. When the queue size
exceed this value, the packets will be dropped. | column | CbQosQueueDepth | .1.3.6.1.4.1.9.9.166.1.9.1.1.10 |
| cbQosQueueingCfgAggrQLimitTime Maximum allowed queue size in milli-seconds for all
individual queues associated with this class. It
is internally converted to bytes by using the
bandwidth that is available for… | column | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.11 |
| cbQosQueueingCfgPriorityLevel The priority level of the queue into which packets matching
this class are queued into. A larger priority level indicates
higher priority. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.12 |
| cbQosQueueingCfgIndividualQSize64 Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
… | column | CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.9.1.1.14 |
| cbQosQueueingCfgBandwidthUnits Units of the accompanying cbQosQueueingCfgbandwidth
parameter | column | QueueingBandwidthUnits | .1.3.6.1.4.1.9.9.166.1.9.1.1.2 |
| cbQosQueueingCfgFlowEnabled Boolean to indicate if flow-based fair-queue is
enabled for this class. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.166.1.9.1.1.3 |
| cbQosQueueingCfgPriorityEnabled Boolean to indicate if low latency queueing
(priority) is enabled for this class. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.166.1.9.1.1.4 |
| cbQosQueueingCfgAggregateQSize deprecated Maximum number of packets that can be held in all the
individual queues associated with this class
before packets are dropped.
cbQosQueueingCfgAggregateQSize object is superseded… | column | Packets Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.5 |
| cbQosQueueingCfgIndividualQSize deprecated Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
… | column | Packets Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.6 |
| cbQosQueueingCfgDynamicQNumber Number of dynamic queues supported when
flow-based fair-queue is in use. | column | Integer32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.7 |
| cbQosQueueingCfgPrioBurstSize In the priority queue, this is the number of bytes
allowed in a single burst.
This parameter only makes sense if Priority is enabled | column | Bytes Unsigned32 | .1.3.6.1.4.1.9.9.166.1.9.1.1.8 |
| cbQosQueueingCfgQLimitUnits Represents the unit type of
cbQosQueueingCfgAggregateQLimit object. | column | CbQosQueueUnitType | .1.3.6.1.4.1.9.9.166.1.9.1.1.9 |