cbQosPolicyDirection
CISCO-CLASS-BASED-QOS-MIB ·
.1.3.6.1.4.1.9.9.166.1.1.1.1.3
Object
column
TrafficDirection
This indicates the direction of traffic for which this service policy is applied.
Context
- MIB
- CISCO-CLASS-BASED-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.166.1.1.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cbQosServicePolicyEntry
- Table
- cbQosServicePolicyTable
- Siblings
- 15
Syntax
TrafficDirection
- Source
- TrafficDirection
- Base type
Enumeration
Values & Constraints
Type Values
1 | input |
2 | output |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cbQosPolicyIndex An arbitrary (system-assigned) index for all
service policies (PolicyMap that has been attached
to a given logical interface). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.1.1.1.1 |
| cbQosEVC for the EVC to which this service is attached.
This field only make sense if the service policy is
attached to an EVC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.1.1.1.10 |
| cbQosPolicyDiscontinuityTime The value of sysUpTime on the most recent occasion at which
any one or more objects of cbQosServicePolicyEntry table for a
given instance suffered a discontinuity. If no such
disc… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.166.1.1.1.1.11 |
| cbQosParentPolicyIndex The value refering to service-policy index of a virtual
interface on which PolicyMap applied directly. Value set would
imply the entry is for a physical interface which is a membe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.1.1.1.12 |
| cbQosTunDstAddrType This object is instantiated if cbQoSIfType object has the value
of tunnel(8). | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.166.1.1.1.1.13 |
| cbQosTunDstAddr This object is instantiated if cbQoSIfType
object has the value of tunnel(8). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.166.1.1.1.1.14 |
| cbQosWirelessIifid This object is instantiated if cbQoSIfType
object has the value of wirelessInterface(9). | column | CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.1.1.1.15 |
| cbQosServiceGroupIndex If the service policy is attached to a particular
service-group, then this object specifies the
corresponding Service-group id. In all other cases
the value of this object is '0… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.1.1.1.16 |
| cbQosIfType This describes the logical interface/media type to
which this service policy is attached. | column | InterfaceType | .1.3.6.1.4.1.9.9.166.1.1.1.1.2 |
| cbQosIfIndex ifIndex for the interface to which this service
is attached. This field makes sense only if the
logical interface has a snmp ifIndex. For e.g. the
value of this field is meaningle… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.166.1.1.1.1.4 |
| cbQosFrDLCI DLCI for the FRVC to which this service is attached.
This field only make sense if the service policy is
attached to a Frame Relay DLCI. | column | CISCO-FRAME-RELAY-MIBDlciNumber | .1.3.6.1.4.1.9.9.166.1.1.1.1.5 |
| cbQosAtmVPI VPI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC. | column | Unsigned32 | .1.3.6.1.4.1.9.9.166.1.1.1.1.6 |
| cbQosAtmVCI VCI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC. | column | Unsigned32 | .1.3.6.1.4.1.9.9.166.1.1.1.1.7 |
| cbQosEntityIndex In cases where the policy is attached to an entity
e.g. control-plane, this object represents the
entity physical index of the entity to which the
policy has been attached. A valu… | column | CISCO-TCEntPhysicalIndexOrZero | .1.3.6.1.4.1.9.9.166.1.1.1.1.8 |
| cbQosVlanIndex If the service policy is attached to a particular
vlan on a trunk or multi-vlan access port, then this
object specifies the corresponding VLAN. In all other
cases the value of thi… | column | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.9.9.166.1.1.1.1.9 |