cbQosPoliceCfgPir
CISCO-CLASS-BASED-QOS-MIB ·
.1.3.6.1.4.1.9.9.166.1.12.1.1.10
Object
column
deprecated
bits/second Unsigned32
The committed policing rate. This is the peak
rate permitted by two rate policing.
cbQosPoliceCfgPir object is superseded by cbQosPoliceCfgPir64.
Context
- MIB
- CISCO-CLASS-BASED-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.166.1.12.1.1.10- Type
- column
- Access
- readonly
- Status
- deprecated
- Units
- bits/second
- Parent
- cbQosPoliceCfgEntry
- Table
- cbQosPoliceCfgTable
- Siblings
- 26
Syntax
bits/second Unsigned32
Values & Constraints
Object Constraints
range: 8000-2000000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cbQosPoliceCfgRate The committed policing rate. This is the sustained
rate permitted by policing.
If a committed policing rate greater than 4294967295
is configurable on the system, t… | column | bits/second Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.1 |
| cbQosPoliceCfgRate64 The committed policing rate. This is the sustained
rate permitted by policing. | column | bits/second CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.12.1.1.11 |
| cbQosPoliceCfgRateType The rate type that configured for CIR & PIR.
1 means rates are configured in bps.
2 means rates are configured in percentage.
3 means rates are configured in cps.
4 means rates ar… | column | CbQosRateType | .1.3.6.1.4.1.9.9.166.1.12.1.1.12 |
| cbQosPoliceCfgPercentRateValue The committed policing rate in percentage. Its value
is valid only when cbQosPoliceCfgRateType equals to 2. | column | % of Interface Bandwidth Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.13 |
| cbQosPoliceCfgPercentPirValue The peak policing rate in percentage. Its value is
valid only when cbQosPoliceCfgRateType equals to 2. | column | % of Interface Bandwidth Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.14 |
| cbQosPoliceCfgCellRate The committed policing rate in cells/second. Its value
is valid only when cbQosPoliceCfgRateType equals to 3. | column | cells/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.15 |
| cbQosPoliceCfgCellPir The peak policing rate in cells/second. Its value is
valid only when cbQosPoliceCfgRateType equals to 3. | column | cells/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.16 |
| cbQosPoliceCfgBurstCell The amount of traffic, in cells, in excess of the
committed policing rate that will be permitted by
the policing feature. | column | Cells Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.17 |
| cbQosPoliceCfgExtBurstCell The amount of traffic, in cells, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted incr… | column | Cells Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.18 |
| cbQosPoliceCfgBurstTime The amount of traffic time, in ms, in excess of the
committed policing rate that will be permitted by
the policing feature. The milli-second value is
internally converted to byte… | column | milli-seconds Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.19 |
| cbQosPoliceCfgBurstSize deprecated The amount of traffic, in bytes, in excess of the
committed policing rate that will be permitted by
the policing feature.
cbQosPoliceCfgBurstSize object is superse… | column | Octets Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.2 |
| cbQosPoliceCfgExtBurstTime The amount of traffic time, in ms, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted in… | column | milli-seconds Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.20 |
| cbQosPoliceCfgCdvt The ATM Cell Delay Variation Tolerance value. | column | micro-second Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.21 |
| cbQosPoliceCfgConformColor The Classmap name used in AF color-aware mode to
specify the conform-color for the incoming packets
which was marked by the previous node.
At least conform-color mu… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.166.1.12.1.1.22 |
| cbQosPoliceCfgExceedColor The Classmap name used in AF color-aware mode to
specify the exceed-color for the incoming packets
which was marked by the previous node.
If both conform-color and … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.166.1.12.1.1.23 |
| cbQosPoliceCfgConditional This object is use to depict weather police is configured
as a conditioniler policer or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.166.1.12.1.1.24 |
| cbQosPoliceCfgBurstSize64 This object indicated the amount of traffic, in bytes, in
excess of the committed policing rate that will be permitted by
the policing feature.
If a device implem… | column | Octets CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.12.1.1.25 |
| cbQosPoliceCfgExtBurstSize64 This object indicated the amount of traffic, in bytes, in
excess of the burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traff… | column | Octets CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.12.1.1.26 |
| cbQosPoliceCfgPir64 This object indicates the committed policing rate. This is the
peak rate permitted by two rate policing.
If a device implements cbQosPoliceCfgPir64, then
it should… | column | Octets CISCO-TCUnsigned64 | .1.3.6.1.4.1.9.9.166.1.12.1.1.27 |
| cbQosPoliceCfgExtBurstSize deprecated The amount of traffic, in bytes, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted in… | column | Octets Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.3 |
| cbQosPoliceCfgConformAction deprecated Action to be taken when the traffic is within the
configured rate, that is, the traffic rate is
conforming.
cbQosPoliceCfgConformAction object is superseded by
cbQ… | column | PoliceAction | .1.3.6.1.4.1.9.9.166.1.12.1.1.4 |
| cbQosPoliceCfgConformSetValue deprecated New packet attribute values for each packets that
conforms to the configured Police rate.
cbQosPoliceCfgConformSetValue object is superseded by
cbQosPoliceActionCfg… | column | Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.5 |
| cbQosPoliceCfgExceedAction deprecated Action to be taken when the traffic exceeds the
configured rate, that is, the traffic is
non-conforming.
cbQosPoliceCfgExceedAction object is superseded by
cbQosPo… | column | PoliceAction | .1.3.6.1.4.1.9.9.166.1.12.1.1.6 |
| cbQosPoliceCfgExceedSetValue deprecated New packet attribute values for each packets that
conforms to the configured Police rate.
cbQosPoliceCfgExceedSetValue object is superseded by
cbQosPoliceActionCfgE… | column | Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.7 |
| cbQosPoliceCfgViolateAction deprecated Action to be taken when the traffic exceeds the
conform and exceed token buckets.
cbQosPoliceCfgViolateAction object is superseded by
cbQosPoliceActionCfgViolate. | column | PoliceAction | .1.3.6.1.4.1.9.9.166.1.12.1.1.8 |
| cbQosPoliceCfgViolateSetValue deprecated New packet attribute values for each packets that
conforms to the Police violate action. The packet
attibute values depend on the action that is taken
for the particular packet. F… | column | Unsigned32 | .1.3.6.1.4.1.9.9.166.1.12.1.1.9 |