cidsHealthDatagramsInFRU
CISCO-CIDS-MIB ·
.1.3.6.1.4.1.9.9.383.1.4.5
Object
scalar
SNMPv2-SMIGauge32
The number of datagrams currently queued in the fragment reassembly unit.
Context
- MIB
- CISCO-CIDS-MIB
- OID
.1.3.6.1.4.1.9.9.383.1.4.5- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cidsHealth
- Siblings
- 32
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cidsHealthPacketLoss The percentage of packets lost at the device
interface level. | scalar | percent Integer32 | .1.3.6.1.4.1.9.9.383.1.4.1 |
| cidsHealthActiveNodes The number of active nodes currently queued in
the device. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.10 |
| cidsHealthTcpDualIpAndPorts The number TCP nodes keyed on both IP addresses
and both ports currently queued in the device. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.11 |
| cidsHealthUdpDualIpAndPorts The number UDP nodes keyed on both IP addresses
and both ports currently queued in the device. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.12 |
| cidsHealthIpDualIp The number IP nodes keyed on both IP addresses
currently queued in the device. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.13 |
| cidsHealthIsSensorMemoryCritical A value between 0 and 10 that should rarely
get above 3. If this is non-zero the sensor
has stopped enforcing policy on some traffic in
order to keep up with the current traffi… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.383.1.4.14 |
| cidsHealthIsSensorActive Indicates the failover status of the device.
True indicates the device is currently active.
False indicates it is in a standby mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.383.1.4.15 |
| cidsHealthCommandAndControlPort The status and network statistics of the
currently configured Command and Control
interface on the device. The Command
and Control interface is where all of the
communications … | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.383.1.4.16 |
| cidsHealthSensorStatsResetTime The value of SNMPv2-MIB::sysUpTime
when the Sensor specific statistics
was reset. The reset time is
collectively for the following objects:
cidsHealthPacketLoss,
cidsHeal… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.383.1.4.17 |
| cidsHealthSecMonAvailability This object indicates the availability of health and security
monitor statistics. If the IPS health and security monitoring
service is disabled, it will return false. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.383.1.4.18 |
| cidsHealthSecMonOverallHealth This object indicates IPS sensor's overall health value -
green, yellow or red. The overall health status is set to the
highest severity of all metrics that are configured to be
… | scalar | CidsHealthStatusColor | .1.3.6.1.4.1.9.9.383.1.4.19 |
| cidsHealthPacketDenialRate The percentage of packets denied due to
protocol and security violations. | scalar | percent Integer32 | .1.3.6.1.4.1.9.9.383.1.4.2 |
| cidsHealthSecMonSoftwareVersion This object indicates the IPS software version number (e.g.,
6.2(1)E3).
This object is instantiated only if the value of
cidsHealthSecMonAvailability is set to 'true'. | scalar | OctetString | .1.3.6.1.4.1.9.9.383.1.4.20 |
| cidsHealthSecMonSignatureVersion This object indicates IPS signature version (e.g., 365.0).
This object is instantiated only if the value of
cidsHealthSecMonAvailability is set to 'true'. | scalar | OctetString | .1.3.6.1.4.1.9.9.383.1.4.21 |
| cidsHealthSecMonLicenseStatus This object indicates IPS license status along with expiration
date. For example it will contain the following possible
values:
- signatureUpdateKey: Not expired until:… | scalar | OctetString | .1.3.6.1.4.1.9.9.383.1.4.22 |
| cidsHealthSecMonOverallAppColor This object indicates the aggregate health status of the
applications - Main, Analysis Engine, Collaboration - where the
status is equal to the most severe status of all three
app… | scalar | CidsHealthStatusColor | .1.3.6.1.4.1.9.9.383.1.4.23 |
| cidsHealthSecMonMainAppStatus This object indicates the running status for the control plane.
This object is instantiated only if the value of
cidsHealthSecMonAvailability is set to 'true'. | scalar | CidsApplicationStatus | .1.3.6.1.4.1.9.9.383.1.4.24 |
| cidsHealthSecMonAnalysisEngineStatus This object indicates the running status for the Analysis
Engine.
This object is instantiated only if the value of cidsHealthSecMonAvailability is set to 'true'. | scalar | CidsApplicationStatus | .1.3.6.1.4.1.9.9.383.1.4.25 |
| cidsHealthSecMonCollaborationAppStatus This object indicates the running status for the Collaboration
Application.
This object is instantiated only if the value of cidsHealthSecMonAvailability is set to 'tru… | scalar | CidsApplicationStatus | .1.3.6.1.4.1.9.9.383.1.4.26 |
| cidsHealthSecMonByPassMode This object indicates the bypass mode. A value of 'true'
indicates bypass mode is on and a value of 'false' indicates it is off.
This object is instantiated only if the… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.383.1.4.27 |
| cidsHealthSecMonMissedPktPctAndThresh This object indicates the missed packet percentage and missed
packets percentage threshold aggregated for all interfaces.
For example, 'missedPacketPercentage=1 redThreshold=6
y… | scalar | OctetString | .1.3.6.1.4.1.9.9.383.1.4.28 |
| cidsHealthSecMonAnalysisEngMemPercent This object indicates the percentage of memory used by Analysis
Engine.
This object is instantiated only if the value of
cidsHealthSecMonAvailability is set to 'true'. | scalar | percent Integer32 | .1.3.6.1.4.1.9.9.383.1.4.29 |
| cidsHealthAlarmsGenerated The number of alarms generated, includes
all currently defined alarm severities. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.383.1.4.3 |
| cidsHealthSecMonSensorLoad This object indicates sensor inspection load.
This object is instantiated only if the value of
cidsHealthSecMonAvailability is set to 'true'. | scalar | Integer32 | .1.3.6.1.4.1.9.9.383.1.4.30 |
| cidsHealthSecMonSensorLoadColor This object indicates the status of current sensor load,
indicated
using status colors. The color is determined based on the
sensor load percentage and configured threshold valu… | scalar | CidsHealthStatusColor | .1.3.6.1.4.1.9.9.383.1.4.31 |
| cidsHealthSecMonVirtSensorStatusTable This table contains the status of each virtual sensor. There
will be one entry per virtual sensor in the system. This is the
status of the network that the virtual sensor is monit… | table | - | .1.3.6.1.4.1.9.9.383.1.4.32 |
| cidsHealthSecMonDataStorageTable This is the table of disk partition details:
Partition Name
Total Space In Partition
Utilized Space
This table tells how each of the file systems are utilize… | table | - | .1.3.6.1.4.1.9.9.383.1.4.33 |
| cidsHealthFragmentsInFRU The number of fragments currently queued in the
fragment reassembly unit. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.4 |
| cidsHealthTcpEmbryonicStreams The number of embryonic TCP streams currently
queued in the device. TCP streams are
considered embryonic if they have not
completed the TCP three-way handshake. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.6 |
| cidsHealthTCPEstablishedStreams The number of established TCP streams currently
queued in the device. Once a stream has
completed a TCP three-way handshake it will
move to the established state. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.7 |
| cidsHealthTcpClosingStreams The number of closing TCP streams currently
queued in the device. A stream will move
from the established state to closing when
a valid FIN or RST flag is received. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.8 |
| cidsHealthTcpStreams The number of TCP streams (embryonic,
established and closing) currently queued
in the device. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.383.1.4.9 |