coCdlAdminStatus
CISCO-CDL-MIB ·
.1.3.6.1.4.1.9.10.88.1.1.1.1.1
Object
Enables/disables CDL on this interface.
When this object is set to 'true', CDL is enabled on
this interface. When this object is set to 'false',
CDL is disabled on this interface.
When CDL is enabled, the following actions are taken:
1) When a non-CDL packet is progressed to this interface for
transmission, the Ethernet packet is modified to carry the
CDL header. Similarly, when a received packet is progressed
from this interface to a non-CDL interface, the CDL header
is removed from the Ethernet packet.
2) Processing of CDL defect indications is activated.
3) The CDL Message Channel used to carry control (e.g. routing,
signalling) and management traffic is activated. The SNMP
agent creates an interface that represents the CDL Message
Channel. The interface representing the CDL Message Channel
is shown as a higher layer interface, with ifType
'propPointToPointSerial', residing above this CDL enabled
interface in the ifStackTable in the IF-MIB.
4) The CDL APS Channel is activated, if supported and APS is
configured for this interface.
5) Transport of multiple data flows (i.e. packet-by-packet
multiplexing) is activated, if this capability is supported
on this interface.
When CDL is disabled, only traditional (non-CDL) Ethernet
packets are transported, all packets on this interface are
treated as one Ethernet data flow, and the interface
representing the CDL message channel is deleted.
Context
- MIB
- CISCO-CDL-MIB
- OID
.1.3.6.1.4.1.9.10.88.1.1.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- coCdlIntfEntry
- Table
- coCdlIntfTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coCdlRxHeaderCRCError The number of CDL frames received with CDL Header CRC errors.
This object represents the lower word value of the counter
associated with the number of CDL header CR… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.88.1.1.1.1.10 |
| coCdlRxHeaderCRCErrorOverflow This object represents the higher word value of the counter
associated with the number of CDL Header CRC errors
encountered in the receive direction.
NOTE: The obje… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.88.1.1.1.1.11 |
| coCdlHCRxHeaderCRCError The number of CDL frames received with CDL Header CRC errors.
This is a High Capacity (64 bit) version of the
coCdlRxHeaderCRCError counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.88.1.1.1.1.12 |
| coCdlRxInvalidFlowID This object counts the number of CDL Flow Identifier lookup
errors in the receive direction. When a CDL interface
multiplexes/demultiplexes more than one elementary packet
stream,… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.88.1.1.1.1.13 |
| coCdlRxInvalidFlowIDOverflow This object represents the higher word value of the counter
associated with the number of CDL Flow Identifier lookup errors
encountered in the receive direction.
NO… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.88.1.1.1.1.14 |
| coCdlHCRxInvalidFlowID This object counts the number of CDL Flow Identifier lookup
errors in the receive direction. When a CDL interface
multiplexes/demultiplexes more than one elementary packet
stream,… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.88.1.1.1.1.15 |
| coCdlRxNonCdlPackets This object counts the number of packets received without
a CDL header on this interface. This counter is
incremented only when CDL is enabled on this interface.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.88.1.1.1.1.16 |
| coCdlRxNonCdlPacketsOverflow This object represents the higher word value of the counter
associated with the number of packets received without a CDL
header on this interface.
NOTE: The object … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.88.1.1.1.1.17 |
| coCdlHCRxNonCdlPackets This object counts the number of packets received without
a CDL header on this interface. This counter is
incremented only when CDL is enabled on this interface.
Th… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.88.1.1.1.1.18 |
| coCdlForceEndOfHop When set to 'true', this object forces CDL Hop Terminating
behavior at this interface. A CDL Hop Terminating Network
Element terminates (generates in one direction and consumes in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.88.1.1.1.1.2 |
| coCdlNodeBehavior This object indicates the current CDL defect indication
behavior of this network element, at this interface. A network
element can take on one of three roles at a CDL enabled
inte… | column | CoCdlNodeBehavior | .1.3.6.1.4.1.9.10.88.1.1.1.1.3 |
| coCdlRxAggDefectIndCurrStatus This object reflects the current status of the CDL Defect
Indication bits received on this interface. | column | CoCdlAggDefectIndStatus | .1.3.6.1.4.1.9.10.88.1.1.1.1.4 |
| coCdlRxAggDefectIndLastChange This object specifies the value of sysUpTime at the last time
there was a change in the value of
coCdlRxAggDefectIndCurrStatus. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.88.1.1.1.1.5 |
| coCdlTxAggDefectIndCurrStatus This object reflects the current status of the CDL Defect
Indication bits transmitted on this interface. | column | CoCdlAggDefectIndStatus | .1.3.6.1.4.1.9.10.88.1.1.1.1.6 |
| coCdlTxAggDefectIndLastChange This object specifies the value of sysUpTime at the last time
there was a change in the value of
coCdlTxAggDefectIndCurrStatus. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.88.1.1.1.1.7 |
| coCdlTransmitMaxFlowIdentifier A CDL enabled interface can aggregate packet streams
(called elementary packet streams) from multiple interfaces.
CDL uses one or two octets to identify the elementary packet
str… | column | CoCdlFlowIdentifier | .1.3.6.1.4.1.9.10.88.1.1.1.1.8 |
| coCdlReceiveMaxFlowIdentifier A CDL enabled interface can aggregate packet streams
(called elementary packet streams) from multiple interfaces.
CDL uses one or two octets to identify the elementary packet
str… | column | CoCdlFlowIdentifier | .1.3.6.1.4.1.9.10.88.1.1.1.1.9 |