ccmSmtpServersTable

CISCO-CALLHOME-MIB · .1.3.6.1.4.1.9.9.300.1.1.22

Object

table

This table contains a list of SMTP servers that may be
used to send out Call Home e-mail messages.
          
An entry is created and deleted by using ccmSmtpServersStatus.
          
The maximum number of entries that can be created in this
table is limited by the object ccmSmtpServersTblMaxEntries.

Context

MIB: CISCO-CALLHOME-MIB
OID: .1.3.6.1.4.1.9.9.300.1.1.22
Type: table
Status: current
Parent: ccmCallHomeConfiguration
Siblings: 40
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
callHomeEnable This object enables/disables the Call Home infrastructure on the local device.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.300.1.1.1`
callHomeAlertActionStatus This object provides the status of the last Call Home action invocation. unknown (1) - unknown successful (2) - successful inprogress (3) - action in progress …	scalar	Enumeration	`.1.3.6.1.4.1.9.9.300.1.1.10`
callHomeAlertActionFailureCause This object provides the failure cause for the last Call Home test invocation. Note that this object is valid only if value of callHomeAlertActionStatus is 'failed'.	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.11`
callHomeDestProfileTable This table contains destination profiles. The Call Home feature requires the destination profiles to be setup to be able to send the Call Home messages to destinations configured.	table	-	`.1.3.6.1.4.1.9.9.300.1.1.12`
callHomeEmailAddrTblMaxEntries The maximum number of entries that the agent supports in the callHomeDestEmailAddressTable. A value of zero indicates no limitation on the number of entries in callHome…	scalar	Unsigned32	`.1.3.6.1.4.1.9.9.300.1.1.13`
callHomeDestEmailAddressTable This table contains email addresses and HTTP URLs for the destination profiles.	table	-	`.1.3.6.1.4.1.9.9.300.1.1.14`
callHomeEmailFrom The email address that is to be used in the 'From' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'a…	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.15`
callHomeEmailReplyTo The email address that is to be used in the 'Reply-To' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RFC822 and RFC11…	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.16`
callHomeEmailMsgDispNotification The email address to which the Message Disposition Notification (also called 'Return Receipt') sent when the email sent from this device is read by the receiver. The format of t…	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.17`
callHomeSmtpServerAddrType Address Type of the SMTP server.	scalar	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.300.1.1.18`
callHomeSmtpServerAddr Address of the SMTP server.	scalar	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.300.1.1.19`
sysContactPhoneNumber The phone number of the contact person for this managed node. The phone number must start with '+' and contains only numeric characters except for space and '-'. Some valid phone…	scalar	OctetString	`.1.3.6.1.4.1.9.9.300.1.1.2`
callHomeSmtpServerPort Port of the SMTP server.	scalar	Unsigned32	`.1.3.6.1.4.1.9.9.300.1.1.20`
ccmSmtpServersTblMaxEntries Indicates the maximum number of SMTP servers supported by this device. A value of zero indicates no limitation on the number of SMTP servers.	scalar	Unsigned32	`.1.3.6.1.4.1.9.9.300.1.1.21`
ccmSysLogSeverity Different devices implementing this mib may use different criteria for issuing Call Home alerts. For the devices that issue Call Home alerts based on severity level of …	scalar	CISCO-SYSLOG-MIBSyslogSeverity	`.1.3.6.1.4.1.9.9.300.1.1.23`
ccmEnableSmtpServerNotif This variable indicates whether the system produces the ccmSmtpServerFailNotif. A false value for this object will prevent ccmSmtpServerFailNotif notification being gen…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.300.1.1.24`
callHomeAlertGroupTypeTable This table contains information about all the alert groups types supported in the system. An entry is created if a new alert group becomes available in the system. …	table	-	`.1.3.6.1.4.1.9.9.300.1.1.25`
callHomeSwInventoryTable This table contains inventory information about all the software services currently enabled in the system. When a software service is disabled from the system, all the entries cor…	table	-	`.1.3.6.1.4.1.9.9.300.1.1.26`
ccmPeriodicSwInventoryMsgEnable This object enables/disables the sending of periodic software inventory Call Home message on the system.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.300.1.1.27`
ccmPeriodicSwInventoryTimeFrame This object represents the time frame for sending the periodic software inventory Call Home message, if the periodic software inventory is enabled on the system i.e., the value of…	scalar	days Unsigned32	`.1.3.6.1.4.1.9.9.300.1.1.28`
ccmMsgThrottlingEnable This object enables/disables the message throttling mechanism implemented on the system. The message throttling mechanism limits the number of Call Home messages for a …	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.300.1.1.29`
sysContactEmailAddress The email address of the contact person for this managed node. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. Some valid E…	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.3`
ccmCallHomeAlertGroupCfg	node	-	`.1.3.6.1.4.1.9.9.300.1.1.30`
ccmCallHomeProfileTestControl	node	-	`.1.3.6.1.4.1.9.9.300.1.1.31`
ccmCallHomeNotifConfig	node	-	`.1.3.6.1.4.1.9.9.300.1.1.32`
ccmPeriodicSwInventoryCfg	node	-	`.1.3.6.1.4.1.9.9.300.1.1.33`
ccmAlertRateLimit The rate-limit, in alerts per minute, of call home alerts generated by the system. Upon exceeding the rate, the alert is dropped.	scalar	alerts per minute SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.300.1.1.34`
ccmHttpProxyServerAddrType This object specifies the type of the HTTP proxy server as represented by the value 'ccmHttpProxyServerAddr'.	scalar	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.300.1.1.35`
ccmHttpProxyServerAddr This object specifies the address of the HTTP proxy server. The type of this address is indicated by the value of 'ccmHttpProxyServerAddrType'.	scalar	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.300.1.1.36`
ccmHttpProxyServerPort This object specifies the port of the HTTP proxy server.	scalar	Unsigned32	`.1.3.6.1.4.1.9.9.300.1.1.37`
ccmHttpProxyServerUseEnable This object enables/disables the use of HTTP proxy server configured for sending callhome messages over HTTP. A value of 'true' specifies that proxy server will be used…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.300.1.1.38`
callHomeSmtpServerUseVrf The Virtual Routing and Forwarding (VRF) domain configured for this SMTP server. A zero length string indicates that there is no VRF domain configured and the default VRF domain …	scalar	CISCO-TCCiscoVrfName	`.1.3.6.1.4.1.9.9.300.1.1.39`
sysStreetAddress The mailing address of this managed node.	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.4`
ccmHttpTransportUseVrf The Virtual Routing and Forwarding (VRF) domain configured for HTTP transport in Call Home. A zero length string indicates that there is no VRF domain configured and the default…	scalar	CISCO-TCCiscoVrfName	`.1.3.6.1.4.1.9.9.300.1.1.40`
callHomeDataPrivacy The objects specifies the privacy level of Call Home messages.	scalar	CallHomeDataPrivacyLevel	`.1.3.6.1.4.1.9.9.300.1.1.41`
callHomeCustomerId A string, in whatever format is appropriate, to identify the customer.	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.5`
callHomeContractId A string, in whatever format is appropriate, to identify the support contract between the customer and support partner.	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.6`
callHomeSiteId A location identifier of this device.	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.300.1.1.7`
callHomeDeviceServicePriority The service priority of the device. This determines how fast the device has to be serviced.	scalar	CISCO-SYSLOG-MIBSyslogSeverity	`.1.3.6.1.4.1.9.9.300.1.1.8`
callHomeAlertAction This object acts as a trigger by which the generation of a particular type of alert can be verified. Specifically, setting this object to a type of alert triggers the sending of …	scalar	CallHomeAlert	`.1.3.6.1.4.1.9.9.300.1.1.9`

Child Objects