ccmAlertRateLimit

CISCO-CALLHOME-MIB · .1.3.6.1.4.1.9.9.300.1.1.34
MIB view Table view

Object

scalar r/w alerts per minute SNMPv2-SMIUnsigned32 
The rate-limit, in alerts per minute, of call home
alerts generated by the system.  Upon exceeding the rate,
the alert is dropped.

Context

MIB
CISCO-CALLHOME-MIB
OID
.1.3.6.1.4.1.9.9.300.1.1.34
Type
scalar
Access
readwrite
Status
current
Units
alerts per minute
Parent
ccmCallHomeConfiguration
Siblings
40

Syntax

alerts per minute SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
callHomeEnable
This object enables/disables the Call Home infrastructure on the local device.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.300.1.1.1
callHomeAlertActionStatus
This object provides the status of the last Call Home action invocation. unknown (1) - unknown successful (2) - successful inprogress (3) - action in progress …
scalarEnumeration.1.3.6.1.4.1.9.9.300.1.1.10
callHomeAlertActionFailureCause
This object provides the failure cause for the last Call Home test invocation. Note that this object is valid only if value of callHomeAlertActionStatus is 'failed'.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.11
callHomeDestProfileTable
This table contains destination profiles. The Call Home feature requires the destination profiles to be setup to be able to send the Call Home messages to destinations configured.
table-.1.3.6.1.4.1.9.9.300.1.1.12
callHomeEmailAddrTblMaxEntries
The maximum number of entries that the agent supports in the callHomeDestEmailAddressTable. A value of zero indicates no limitation on the number of entries in callHome…
scalarUnsigned32.1.3.6.1.4.1.9.9.300.1.1.13
callHomeDestEmailAddressTable
This table contains email addresses and HTTP URLs for the destination profiles.
table-.1.3.6.1.4.1.9.9.300.1.1.14
callHomeEmailFrom
The email address that is to be used in the 'From' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'a…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.15
callHomeEmailReplyTo
The email address that is to be used in the 'Reply-To' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RFC822 and RFC11…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.16
callHomeEmailMsgDispNotification
The email address to which the Message Disposition Notification (also called 'Return Receipt') sent when the email sent from this device is read by the receiver. The format of t…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.17
callHomeSmtpServerAddrType
Address Type of the SMTP server.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.300.1.1.18
callHomeSmtpServerAddr
Address of the SMTP server.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.300.1.1.19
sysContactPhoneNumber
The phone number of the contact person for this managed node. The phone number must start with '+' and contains only numeric characters except for space and '-'. Some valid phone…
scalarOctetString.1.3.6.1.4.1.9.9.300.1.1.2
callHomeSmtpServerPort
Port of the SMTP server.
scalarUnsigned32.1.3.6.1.4.1.9.9.300.1.1.20
ccmSmtpServersTblMaxEntries
Indicates the maximum number of SMTP servers supported by this device. A value of zero indicates no limitation on the number of SMTP servers.
scalarUnsigned32.1.3.6.1.4.1.9.9.300.1.1.21
ccmSmtpServersTable
This table contains a list of SMTP servers that may be used to send out Call Home e-mail messages. An entry is created and deleted by using ccmSmtpServersStatus. …
table-.1.3.6.1.4.1.9.9.300.1.1.22
ccmSysLogSeverity
Different devices implementing this mib may use different criteria for issuing Call Home alerts. For the devices that issue Call Home alerts based on severity level of …
scalarCISCO-SYSLOG-MIBSyslogSeverity.1.3.6.1.4.1.9.9.300.1.1.23
ccmEnableSmtpServerNotif
This variable indicates whether the system produces the ccmSmtpServerFailNotif. A false value for this object will prevent ccmSmtpServerFailNotif notification being gen…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.300.1.1.24
callHomeAlertGroupTypeTable
This table contains information about all the alert groups types supported in the system. An entry is created if a new alert group becomes available in the system. …
table-.1.3.6.1.4.1.9.9.300.1.1.25
callHomeSwInventoryTable
This table contains inventory information about all the software services currently enabled in the system. When a software service is disabled from the system, all the entries cor…
table-.1.3.6.1.4.1.9.9.300.1.1.26
ccmPeriodicSwInventoryMsgEnable
This object enables/disables the sending of periodic software inventory Call Home message on the system.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.300.1.1.27
ccmPeriodicSwInventoryTimeFrame
This object represents the time frame for sending the periodic software inventory Call Home message, if the periodic software inventory is enabled on the system i.e., the value of…
scalardays Unsigned32.1.3.6.1.4.1.9.9.300.1.1.28
ccmMsgThrottlingEnable
This object enables/disables the message throttling mechanism implemented on the system. The message throttling mechanism limits the number of Call Home messages for a …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.300.1.1.29
sysContactEmailAddress
The email address of the contact person for this managed node. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. Some valid E…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.3
ccmCallHomeAlertGroupCfgnode-.1.3.6.1.4.1.9.9.300.1.1.30
ccmCallHomeProfileTestControlnode-.1.3.6.1.4.1.9.9.300.1.1.31
ccmCallHomeNotifConfignode-.1.3.6.1.4.1.9.9.300.1.1.32
ccmPeriodicSwInventoryCfgnode-.1.3.6.1.4.1.9.9.300.1.1.33
ccmHttpProxyServerAddrType
This object specifies the type of the HTTP proxy server as represented by the value 'ccmHttpProxyServerAddr'.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.300.1.1.35
ccmHttpProxyServerAddr
This object specifies the address of the HTTP proxy server. The type of this address is indicated by the value of 'ccmHttpProxyServerAddrType'.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.300.1.1.36
ccmHttpProxyServerPort
This object specifies the port of the HTTP proxy server.
scalarUnsigned32.1.3.6.1.4.1.9.9.300.1.1.37
ccmHttpProxyServerUseEnable
This object enables/disables the use of HTTP proxy server configured for sending callhome messages over HTTP. A value of 'true' specifies that proxy server will be used…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.300.1.1.38
callHomeSmtpServerUseVrf
The Virtual Routing and Forwarding (VRF) domain configured for this SMTP server. A zero length string indicates that there is no VRF domain configured and the default VRF domain …
scalarCISCO-TCCiscoVrfName.1.3.6.1.4.1.9.9.300.1.1.39
sysStreetAddress
The mailing address of this managed node.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.4
ccmHttpTransportUseVrf
The Virtual Routing and Forwarding (VRF) domain configured for HTTP transport in Call Home. A zero length string indicates that there is no VRF domain configured and the default…
scalarCISCO-TCCiscoVrfName.1.3.6.1.4.1.9.9.300.1.1.40
callHomeDataPrivacy
The objects specifies the privacy level of Call Home messages.
scalarCallHomeDataPrivacyLevel.1.3.6.1.4.1.9.9.300.1.1.41
callHomeCustomerId
A string, in whatever format is appropriate, to identify the customer.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.5
callHomeContractId
A string, in whatever format is appropriate, to identify the support contract between the customer and support partner.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.6
callHomeSiteId
A location identifier of this device.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.300.1.1.7
callHomeDeviceServicePriority
The service priority of the device. This determines how fast the device has to be serviced.
scalarCISCO-SYSLOG-MIBSyslogSeverity.1.3.6.1.4.1.9.9.300.1.1.8
callHomeAlertAction
This object acts as a trigger by which the generation of a particular type of alert can be verified. Specifically, setting this object to a type of alert triggers the sending of …
scalarCallHomeAlert.1.3.6.1.4.1.9.9.300.1.1.9