callHomeSmtpServerUseVrf
CISCO-CALLHOME-MIB ·
.1.3.6.1.4.1.9.9.300.1.1.39
Object
The Virtual Routing and Forwarding (VRF) domain configured
for this SMTP server. A zero length string indicates that
there is no VRF domain configured and the default VRF domain
is used
A 'set' operation with zero length string indicates that there
is no VRF domain configured. A subsequent 'get' operation on
this object will return 'default'
Context
- MIB
- CISCO-CALLHOME-MIB
- OID
.1.3.6.1.4.1.9.9.300.1.1.39- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ccmCallHomeConfiguration
- Siblings
- 40
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| callHomeEnable This object enables/disables the Call Home infrastructure
on the local device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.300.1.1.1 |
| callHomeAlertActionStatus This object provides the status of the last Call Home action
invocation.
unknown (1) - unknown
successful (2) - successful
inprogress (3) - action in progress
… | scalar | Enumeration | .1.3.6.1.4.1.9.9.300.1.1.10 |
| callHomeAlertActionFailureCause This object provides the failure cause for the last
Call Home test invocation.
Note that this object is valid only if value of
callHomeAlertActionStatus is 'failed'. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.11 |
| callHomeDestProfileTable This table contains destination profiles.
The Call Home feature requires the destination profiles to be
setup to be able to send the Call Home messages to
destinations configured. | table | - | .1.3.6.1.4.1.9.9.300.1.1.12 |
| callHomeEmailAddrTblMaxEntries The maximum number of entries that the agent supports in
the callHomeDestEmailAddressTable.
A value of zero indicates no limitation on the number of entries
in callHome… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.300.1.1.13 |
| callHomeDestEmailAddressTable This table contains email addresses and HTTP URLs
for the destination profiles. | table | - | .1.3.6.1.4.1.9.9.300.1.1.14 |
| callHomeEmailFrom The email address that is to be used in the 'From' field
when sending the email using SMTP. The format of this object
is an e-mail address which conforms to RFC822 and RFC1123
'a… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.15 |
| callHomeEmailReplyTo The email address that is to be used in the 'Reply-To'
field when sending the email using SMTP. The format of
this object is an e-mail address which conforms to RFC822
and RFC11… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.16 |
| callHomeEmailMsgDispNotification The email address to which the Message Disposition
Notification (also called 'Return Receipt') sent when the
email sent from this device is read by the receiver. The
format of t… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.17 |
| callHomeSmtpServerAddrType Address Type of the SMTP server. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.300.1.1.18 |
| callHomeSmtpServerAddr Address of the SMTP server. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.300.1.1.19 |
| sysContactPhoneNumber The phone number of the contact person for this managed
node. The phone number must start with '+' and contains
only numeric characters except for space and '-'.
Some valid phone… | scalar | OctetString | .1.3.6.1.4.1.9.9.300.1.1.2 |
| callHomeSmtpServerPort Port of the SMTP server. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.300.1.1.20 |
| ccmSmtpServersTblMaxEntries Indicates the maximum number of SMTP servers supported by
this device. A value of zero indicates no limitation on
the number of SMTP servers. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.300.1.1.21 |
| ccmSmtpServersTable This table contains a list of SMTP servers that may be
used to send out Call Home e-mail messages.
An entry is created and deleted by using ccmSmtpServersStatus.
… | table | - | .1.3.6.1.4.1.9.9.300.1.1.22 |
| ccmSysLogSeverity Different devices implementing this mib may use
different criteria for issuing Call Home alerts.
For the devices that issue Call Home alerts based on
severity level of … | scalar | CISCO-SYSLOG-MIBSyslogSeverity | .1.3.6.1.4.1.9.9.300.1.1.23 |
| ccmEnableSmtpServerNotif This variable indicates whether the system produces
the ccmSmtpServerFailNotif.
A false value for this object will prevent
ccmSmtpServerFailNotif notification being gen… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.300.1.1.24 |
| callHomeAlertGroupTypeTable This table contains information about all the alert groups
types supported in the system.
An entry is created if a new alert group becomes available
in the system.
… | table | - | .1.3.6.1.4.1.9.9.300.1.1.25 |
| callHomeSwInventoryTable This table contains inventory information about all the
software services currently enabled in the system.
When a software service is disabled from the system, all
the entries cor… | table | - | .1.3.6.1.4.1.9.9.300.1.1.26 |
| ccmPeriodicSwInventoryMsgEnable This object enables/disables the sending of periodic
software inventory Call Home message on the system. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.300.1.1.27 |
| ccmPeriodicSwInventoryTimeFrame This object represents the time frame for sending the
periodic software inventory Call Home message, if the
periodic software inventory is enabled on the system
i.e., the value of… | scalar | days Unsigned32 | .1.3.6.1.4.1.9.9.300.1.1.28 |
| ccmMsgThrottlingEnable This object enables/disables the message throttling
mechanism implemented on the system.
The message throttling mechanism limits the number
of Call Home messages for a … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.300.1.1.29 |
| sysContactEmailAddress The email address of the contact person for this managed
node. The format of this object is an e-mail address
which conforms to RFC822 and RFC1123 'addr-spec'
syntax.
Some valid E… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.3 |
| ccmCallHomeAlertGroupCfg | node | - | .1.3.6.1.4.1.9.9.300.1.1.30 |
| ccmCallHomeProfileTestControl | node | - | .1.3.6.1.4.1.9.9.300.1.1.31 |
| ccmCallHomeNotifConfig | node | - | .1.3.6.1.4.1.9.9.300.1.1.32 |
| ccmPeriodicSwInventoryCfg | node | - | .1.3.6.1.4.1.9.9.300.1.1.33 |
| ccmAlertRateLimit The rate-limit, in alerts per minute, of call home
alerts generated by the system. Upon exceeding the rate,
the alert is dropped. | scalar | alerts per minute SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.300.1.1.34 |
| ccmHttpProxyServerAddrType This object specifies the type of the HTTP proxy server as
represented by the value 'ccmHttpProxyServerAddr'. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.300.1.1.35 |
| ccmHttpProxyServerAddr This object specifies the address of the HTTP proxy server.
The type of this address is indicated by the value of
'ccmHttpProxyServerAddrType'. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.300.1.1.36 |
| ccmHttpProxyServerPort This object specifies the port of the HTTP proxy server. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.300.1.1.37 |
| ccmHttpProxyServerUseEnable This object enables/disables the use of HTTP proxy
server configured for sending callhome messages over HTTP.
A value of 'true' specifies that proxy server will be
used… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.300.1.1.38 |
| sysStreetAddress The mailing address of this managed node. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.4 |
| ccmHttpTransportUseVrf The Virtual Routing and Forwarding (VRF) domain configured
for HTTP transport in Call Home. A zero length string
indicates that there is no VRF domain configured and the
default… | scalar | CISCO-TCCiscoVrfName | .1.3.6.1.4.1.9.9.300.1.1.40 |
| callHomeDataPrivacy The objects specifies the privacy level of Call Home messages. | scalar | CallHomeDataPrivacyLevel | .1.3.6.1.4.1.9.9.300.1.1.41 |
| callHomeCustomerId A string, in whatever format is appropriate, to identify
the customer. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.5 |
| callHomeContractId A string, in whatever format is appropriate, to identify
the support contract between the customer and support
partner. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.6 |
| callHomeSiteId A location identifier of this device. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.300.1.1.7 |
| callHomeDeviceServicePriority The service priority of the device.
This determines how fast the device has to be serviced. | scalar | CISCO-SYSLOG-MIBSyslogSeverity | .1.3.6.1.4.1.9.9.300.1.1.8 |
| callHomeAlertAction This object acts as a trigger by which the generation of
a particular type of alert can be verified. Specifically,
setting this object to a type of alert triggers the
sending of … | scalar | CallHomeAlert | .1.3.6.1.4.1.9.9.300.1.1.9 |