cctmActiveRetrainFailures
CISCO-CALL-TRACKER-MODEM-MIB ·
.1.3.6.1.4.1.9.9.165.1.1.1.1.23
Object
column
SNMPv2-SMICounter32
The count of retrains which failed to complete.
A failure to retrain results in another retrain
attempt. The call will terminate if too many
consecutive retrain failures occur. The consecutive
retrain failure threshold is system specific.
Context
- MIB
- CISCO-CALL-TRACKER-MODEM-MIB
- OID
.1.3.6.1.4.1.9.9.165.1.1.1.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cctmActiveEntry
- Table
- cctmActiveTable
- Siblings
- 32
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cctmActiveProjectedMaxRxRate Maximum received rate local modem informs remote
modem it will support based on initial negotiations.
The remote modem will not attempt to transmit at
rates greater… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.1 |
| cctmActiveSupportedDC The data compression protocols supported by the
calling modem.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-b… | column | Bits | .1.3.6.1.4.1.9.9.165.1.1.1.1.10 |
| cctmActiveDataCompression The modem compression protocol selected for this call. | column | CctmDataCompression | .1.3.6.1.4.1.9.9.165.1.1.1.1.11 |
| cctmActiveRxHighWatermark The maximum receive data rate achieved during this call. | column | bits per second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.12 |
| cctmActiveRxLowWatermark The minimum receive data rate during this call. | column | bits per second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.13 |
| cctmActiveTxHighWatermark The maximum transmit data rate achieved during this call. | column | bits per second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.14 |
| cctmActiveTxLowWatermark The minimum transmit data rate during this call. | column | bits per second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.15 |
| cctmActiveLocalUpRateShifts The count of locally initiated rate shifts to increase
the data rate which were successful. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.16 |
| cctmActiveLocalDownRateShifts The count of locally initiated rate shifts to decrease
the data rate which were successful. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.17 |
| cctmActiveRemoteUpRateShifts The count of remotely initiated rate shifts to increase
the data rate which were successful. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.18 |
| cctmActiveRemoteDownRateShifts The count of remotely initiated rate shifts to decrease
the data rate which were successful. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.19 |
| cctmActiveProjectedMaxTxRate Maximum rate the remote modem indicates it can
accept based on initial negotiations.
The local modem will not attempt to transmit at
rates above what the remote mod… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.2 |
| cctmActiveRateShiftFailures The count of rate shift attempts which failed
to complete.
A failure to complete a rate renegotiation results in a
retrain attempt. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.20 |
| cctmActiveLocalRetrains The count of locally initiated retrains for the call.
Includes successfully completed retrains and those
which failed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.21 |
| cctmActiveRemoteRetrains The count of remotely initiated retrains for the call.
Includes successfully completed retrains and those
which failed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.22 |
| cctmActiveRxLinkOctets The total modem link level octets received during this
call. If using Error Correction and Data Compression, this
is the compressed data within the EC protocol frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.24 |
| cctmActiveTxLinkOctets The total modem link level octets transmitted during this
call. If using Error Correction and Data Compression, this
is the compressed data within the EC protocol frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.25 |
| cctmActiveRxECFrames The total number of error correction data frames
received successfully.
This does not include damaged frames or control
frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.26 |
| cctmActiveTxECFrames The total number of error correction data frames
transmitted successfully.
This does not include data frame resends or control
frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.27 |
| cctmActiveRxECNAKs The total number of EC protocol negative acknowledgements
(NAK) received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.28 |
| cctmActiveTxECNAKs The total number of EC protocol negative acknowledgements
(NAK) sent. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.29 |
| cctmActiveRxRate Current receive data rate for this call.
The value of this object will be the same as reported
in cmRXRate from CISCO-MODEM-MGMT-MIB while the call
is active. | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.3 |
| cctmActiveRxECFramesBad The total error correction frames received during
the call which were determined to be bad. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.30 |
| cctmActiveECFramesResent The count of total retransmitted error correction
data frames during the call. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.31 |
| cctmActiveECLinkTimeouts This counter provides the number of EC link protocol
timer expirations which have occurred during the call.
This corresponds to the T401 timer for LAPM and MNP.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.32 |
| cctmActiveRxCharLost The number of characters received by the modem
but were dropped due to host buffer over run. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.33 |
| cctmActiveTxRate Current transmit data rate for this call.
The value of this object will be the same as reported
in cmTXRate from CISCO-MODEM-MGMT-MIB while the call
is active. | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.165.1.1.1.1.4 |
| cctmActiveAttemptedModulation The initial modulation attempted when the modems began
negotiation. | column | CctmModulation | .1.3.6.1.4.1.9.9.165.1.1.1.1.5 |
| cctmActiveInitialModulation The initial negotiated modulation. | column | CctmModulation | .1.3.6.1.4.1.9.9.165.1.1.1.1.6 |
| cctmActiveModulation The current modulation for this call.
It is possible for retrains to result in the modulation
being renogiated during a call.
The value of this objec… | column | CctmModulation | .1.3.6.1.4.1.9.9.165.1.1.1.1.7 |
| cctmActiveAttemptedECProtocol The initial modem error correction protocol attempted
during call negotiation.
The actual EC negotiated is in cctmActiveECProtocol. | column | CctmECProtocol | .1.3.6.1.4.1.9.9.165.1.1.1.1.8 |
| cctmActiveECProtocol The modem error correction protocol negotiated for
this call.
The value of this object will be the same as reported
in cmProtocolUsed from CISCO-MODEM-MGMT-MIB
whil… | column | CctmECProtocol | .1.3.6.1.4.1.9.9.165.1.1.1.1.9 |