ccsSpectrumRequestResolution
CISCO-CABLE-SPECTRUM-MIB ·
.1.3.6.1.4.1.9.9.114.1.2.1.1.6
Object
column
r/w
KHz Integer32
A span between two frequencies.
ccsSpectrumRequestResolution dictates the amount of
receiving power data to be returned in ccsSpectrumDataTable.
The finer the resolution, the more data returned.
ccsSpectrumRequestResolution is adjusted to a value which
is divisible by FFT's 12KHz bin size.
Context
- MIB
- CISCO-CABLE-SPECTRUM-MIB
- OID
.1.3.6.1.4.1.9.9.114.1.2.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- KHz
- Parent
- ccsSpectrumRequestEntry
- Table
- ccsSpectrumRequestTable
- Siblings
- 10
Syntax
KHz Integer32
Values & Constraints
Object Constraints
range: 12-37000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccsSpectrumRequestIndex An arbitrary integer to uniquely identify the entry. | column | Integer32 | .1.3.6.1.4.1.9.9.114.1.2.1.1.1 |
| ccsSpectrumRequestStoppedTime The value of sysUpTime when the spectrum measurement
operation stops. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.114.1.2.1.1.10 |
| ccsSpectrumRequestStatus The control that allows modification, creation, and
deletion of entries. For detailed rules, see the
ccsSpectrumRequestEntry DESCRIPTION. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.114.1.2.1.1.11 |
| ccsSpectrumRequestIfIndex The ifIndex of a docsCableUpstream(129) interface.
The background noise measurement is requested when
ccsSpectrumRequestIfIndex is specified.
The rec… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.114.1.2.1.1.2 |
| ccsSpectrumRequestMacAddr A MAC address that identifies a remote CM.
The default value of 0000.0000.0000 indicates that
the background noise will be measured for the
upstream. In this case,… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.114.1.2.1.1.3 |
| ccsSpectrumRequestLowFreq Start of frequency range.
The ccsSpectrumRequestLowFreq is adjusted slightly to
accurately represent the actual starting point
of the frequency range.
… | column | KHz CCSFrequency | .1.3.6.1.4.1.9.9.114.1.2.1.1.4 |
| ccsSpectrumRequestUpperFreq End of frequency range.
With the adjustment done to the ccsSpectrumRequestLowFreq,
ccsSpectrumRequestUpperFreq will also be adjusted to the
last frequency within th… | column | KHz CCSFrequency | .1.3.6.1.4.1.9.9.114.1.2.1.1.5 |
| ccsSpectrumRequestOperation The control that allows 'start' or 'abort' of
the test.
Since there is only 1 FFT engine running on the CMTS,
'start' changes ccsSpectrumRequestOperState to 'pendin… | column | CCSRequestOperation | .1.3.6.1.4.1.9.9.114.1.2.1.1.7 |
| ccsSpectrumRequestOperState The operational state of the test.
ccsSpectrumRequestIfIndex, ccsSpectrumRequestMacAddr,
ccsSpectrumRequestUpperFreq, ccsSpectrumRequestLowFreq
and ccsSpectrumReque… | column | CCSRequestOperState | .1.3.6.1.4.1.9.9.114.1.2.1.1.8 |
| ccsSpectrumRequestStartTime The value of sysUpTime when the spectrum measurement
operation starts. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.114.1.2.1.1.9 |