ccqmCmtsEnfRuleSampleRate
CISCO-CABLE-QOS-MONITOR-MIB ·
.1.3.6.1.4.1.9.9.341.1.1.1.1.5
Object
This object represents the interval at which a decision would be made to check if the subscriber over consumed his resources based on the subscriber usage in the past duration. Since the duration can range between 10 minutes to 30 days hence the range of sample rate would change accordingly too. Some empirical calculations for the same are: The maximum memory to be used per line card for STM is 10 MBytes. The maximum number of modems that can be supported is 6000 per line card. Now, per sample memory consumption is 8 bytes hence approximately, the maximum number of samples that can be allowed are 10 * 10 ^ 6 / (6 * 10 ^ 3 * 2 * 8) ~ 100 Hence, given the duration the sample rate would be calculated as duration / 100 = sample rate only if the duration happens to be more than 1440. For cases when the duration is less than 1440, the sample rate range would be between 10 to 30. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1).
Context
- MIB
- CISCO-CABLE-QOS-MONITOR-MIB
- OID
.1.3.6.1.4.1.9.9.341.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- ccqmCmtsEnforceRuleEntry
- Table
- ccqmCmtsEnforceRuleTable
- Siblings
- 22
Syntax
minutes SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccqmCmtsEnfRuleName The name of the enforce rule. | column | OctetString | .1.3.6.1.4.1.9.9.341.1.1.1.1.1 |
| ccqmCmtsEnfRuleRowStatus The object controls and reflects the status of rows in this
table. All row status values are supported.
The status of the row needs to be changed from active(1) to
notInService(… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.341.1.1.1.1.10 |
| ccqmCmtsEnfRuleAvgRate This object defines the rate at which the subscriber is
allowed to consume for the monitoring duration. So, if
this rate is defined to be 2kbits/sec and the monitoring
duration i… | column | kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.11 |
| ccqmCmtsEnfRuleDocsVer This defines the DOCSIS version of the modems that the
enforce rule would be applicable to. If it is set to
docsis10(2) then only ccqmCmtsEnfRuleRegQoS
and ccqmCmtsEnfRuleEnfQoS … | column | Enumeration | .1.3.6.1.4.1.9.9.341.1.1.1.1.12 |
| ccqmCmtsEnfRuleRegSerClassName This object represents a pointer to the object
describing the quality of service attributes
associated with the registered service of the
subscriber. For DOCSIS1.1 and DOCSIS2.0 s… | column | OctetString | .1.3.6.1.4.1.9.9.341.1.1.1.1.13 |
| ccqmCmtsEnfRuleEnfSerClassName This object represents a pointer to the object
describing the quality of service attributes
associated with the registered service of the
subscriber. For DOCSIS1.1 and DOCSIS2.0 s… | column | OctetString | .1.3.6.1.4.1.9.9.341.1.1.1.1.14 |
| ccqmCmtsEnfRuleMonType This object defines the monitoring type. If it is set
to basic(1), then ccqmCmtsEnfRuleMonDuration and
ccqmCmtsEnfRuleAvgRate are used to define the monitoring
and if the peak-of… | column | Enumeration | .1.3.6.1.4.1.9.9.341.1.1.1.1.15 |
| ccqmCmtsEnfRuleFirstPeakTime The user can define two peak times and the
remaining hours will be treated as offpeak and the
monitoring will happen for these offpeak hours if
ccqmCmtsEnfRuleOffPeakDuration and… | column | Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.16 |
| ccqmCmtsEnfRuleFirstDuration This object defines the duration for which the first
peak time would be applicable. When
ccqmCmtsEnfRuleMonDuration is polled during first peak,
it will return this value. The cc… | column | minutes Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.17 |
| ccqmCmtsEnfRuleFirstAvgRate This object defines the rate at which the subscriber is
allowed to consume during the first peak duration. The
ccqmCmtsEnfRuleFirstDuration has to be defined before
defining this… | column | kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.18 |
| ccqmCmtsEnfRuleSecondPeakTime The user can define two peak times in a day. The second
peak is defined using ccqmCmtsEnfRuleSecondPeakTime,
ccqmCmtsEnfRuleSecondDuration and
ccqmCmtsEnfRuleSecondThreshold ob… | column | Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.19 |
| ccqmCmtsEnfRuleRegQoS This object represents a pointer to the object
describing the quality of service attributes
associated with the registered service of the
subscriber.
For DOCSIS1.0 (DOCSIS1.0+) … | column | Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.2 |
| ccqmCmtsEnfRuleSecondDuration This object defines the duration for which the second
peak time would be applicable. When
ccqmCmtsEnfRuleMonDuration is polled during second peak,
it will return this value. It … | column | minutes Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.20 |
| ccqmCmtsEnfRuleSecondAvgRate This object defines the rate at which the subscriber is
allowed to consume during the second peak duration. The
ccqmCmtsEnfRuleSecondDuration has to be defined before
defining th… | column | kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.21 |
| ccqmCmtsEnfRuleOffPeakDuration This object defines the monitoring-duration that
would be applicable for the offpeak times of the day.
The off peak times are the times during the day when
none of the first peak… | column | minutes Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.22 |
| ccqmCmtsEnfRuleOffPeakAvgRate This object defines the rate at which the subscriber is
allowed to consume during the off-peak duration. The
ccqmCmtsEnfRuleOffPeakDuration has to be defined before
defining this… | column | kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.23 |
| ccqmCmtsEnfRuleEnfQos This object represents a pointer to the object
describing the quality of service attributes
associated with the registered service of the
subscriber.
For DOCSIS1.0 (and DOCSIS1.… | column | Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.3 |
| ccqmCmtsEnfRuleMonDuration This object represents the duration for which
subscribers would be monitored to determine if they
were over consuming resources.
This object can be set only when ccqmCmtsEnfRule… | column | minutes Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.4 |
| ccqmCmtsEnfRulePenaltyPeriod This object represents the period in which the
enforced QoS parameter set will be in effect from
the time of detection.
When the time as defined by this object expires, the
regi… | column | minutes Unsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.6 |
| ccqmCmtsEnfRuleByteCount obsolete The number of kbytes that the subscriber can transmit in
the monitoring duration as indicated by
ccqmCmtsEnfRuleMonDuration before being flagged as over
consuming.
This object … | column | 1000 bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.341.1.1.1.1.7 |
| ccqmCmtsEnfRuleDirection Specifies if the average rate specified by
ccqmCmtsEnfRuleAvgRate is for the upstream/downstream
direction.
Setting to bidirection(3) is not permitted.
This object cannot be ch… | column | CCQMRuleDirection | .1.3.6.1.4.1.9.9.341.1.1.1.1.8 |
| ccqmCmtsEnfRuleAutoEnforce If the ccqmCmtsEnfRuleAutoEnforce is TRUE, the enforced QoS
parameter set as specified by ccqmCmtsEnfRuleEnfQos for
DOCSIS1.0 (and DOCSIS1.0+) modems or
ccqmCmtsEnfRuleEnfSerClass… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.341.1.1.1.1.9 |