ccrSyncConfigOnSet
CISCO-C8500-REDUNDANCY-MIB ·
.1.3.6.1.4.1.9.9.105.1.1.2
Object
scalar
r/w
Bits
The device's running-configuration and startup-configuration both reside on the active CPU card. This object indicates whether these configurations should be copied from the active CPU to the standby CPU whenever they change. It is acceptable to copy either, both, or neither.
Context
- MIB
- CISCO-C8500-REDUNDANCY-MIB
- OID
.1.3.6.1.4.1.9.9.105.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ccrCpu
- Siblings
- 7
Syntax
Bits
Values & Constraints
Enumerated Values
0 | runningConfig |
1 | startupConfig |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccrCpuTable There is an entry in this table for each slot that
can hold a CPU card. | table | - | .1.3.6.1.4.1.9.9.105.1.1.1 |
| ccrCpuStandbyEnableMode This object is used to allow or disallow the
execution of the enable exec command on the
secondary CPU.
When set to 'true', the enable exec command can be
executed on… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.105.1.1.3 |
| ccrCpuSwitchoverTime The time taken for the most recent CPU switchover. | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.105.1.1.4 |
| ccrForceCounterSync This object is used to force the synchronization of
counters from primary CPU to secondary CPU. It should
generally be set just before a controlled Route
Processor Switchover.
… | scalar | Enumeration | .1.3.6.1.4.1.9.9.105.1.1.5 |
| ccrIfCounterSyncFreq This object configures the periodicity of interface
counter synchronization from primary CPU to
secondary CPU. Setting this object to 0 will disable
counter synchronization. | scalar | minutes Integer32 | .1.3.6.1.4.1.9.9.105.1.1.6 |
| ccrVcCounterSyncFreq This object configures the periodicity of Virtual
Circuit (VC) counter synchronization from primary CPU
to secondary CPU. Setting this object to 0 will
disable counter synchron… | scalar | minutes Integer32 | .1.3.6.1.4.1.9.9.105.1.1.7 |
| ccrSigCounterSyncEnable This object configures the synchronization of ATM
Signalling Statistics from primary CPU to
secondary CPU.
When this object is set to 'true', sychronization
is enable… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.105.1.1.8 |