c2900InfoVisualIndicatorMode
CISCO-C2900-MIB ·
.1.3.6.1.4.1.9.9.87.1.1.8
Object
scalar
Enumeration
This object reflects what is currently selected
as the visual indication mode, selected by the
mode button.
The portStatus(1) mode uses the visual LEDS
to indicate port link status.
The fullDuplex(2) mode uses the visual LEDS
to indicate that a port is running with full
duplex or half duplex or no link status.
The linkRate(3) mode uses the visual LEDS to
indicate the rate of operation on a port:
100 MBPS or 10 MBPS or no link.
The utilization(4) mode uses the visual LEDS to
indicate the utiliztion of the system as more total
bandwidth through the switch is being utilized,
more LED's are lit.
Context
- MIB
- CISCO-C2900-MIB
- OID
.1.3.6.1.4.1.9.9.87.1.1.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- c2900SysInfo
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | portStatus |
2 | fullDuplex |
3 | linkRate |
4 | utilization |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| c2900InfoBoardRevision Returns the revision number of the main board
on which the FastSwitch firmware resides. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.1 |
| c2900InfoBoardIdentifier Returns the identifier of the main board
on which the FastSwitch firmware resides. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.10 |
| c2900InfoPeakBuffersUsed The maximum number of 64-byte buffers used in the
main switch buffer pool. | scalar | buffers SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.2 |
| c2900InfoTotalBufferDepth It represents the total number of 64-byte buffers
in the Ethernet Controller. | scalar | buffers SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.3 |
| c2900InfoAddrCapacity The system-wide maximum number of MAC addresses
supported in the address table, a primary
resource when forwarding frames through a bridge.
The address table is dynamically update… | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.4 |
| c2900InfoRestrictedStaticAddrCapacity The system-wide maximum number of static addresses
supported. A static address is one that has explicit
source port filtering information assigned.
This number limits … | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.5 |
| c2900InfoSelfTestFailed A bit array where the presence of a particular bit
indicates a failure of a specific Power On Self Test.
Bit 0 - System Board Failure
Bit 1 - CPU Buffer Failure
Bit 2 - Notify RAM… | scalar | OctetString | .1.3.6.1.4.1.9.9.87.1.1.6 |
| c2900InfoUtilDisplay The number of utilization meter LEDs currently
lit on the front panel, if the value of
c2900InfoVisualIndicatorMode is selected as
utilization(4). More LEDs are lit
as more total… | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.87.1.1.7 |
| c2900InfoRedunantPowerSupplyInfo The switch allows a redundant power supply in addition
to its local power supply. Only one power source can be
supplying power to a unit.
absent(1) :the redundant power… | scalar | Enumeration | .1.3.6.1.4.1.9.9.87.1.1.9 |