catmtCidVBDCodec

CISCO-ATM-TRUNK-MIB · .1.3.6.1.4.1.9.9.351.1.1.1.1.9
MIB view Table view

Object

column r/w CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate 
This object specifies the CODEC type to be used for Voice
Band Data (VBD) upspeed.
              
Upspeed is to change the transmission rate of a voice
interface to a higher rate of CODEC type for fax/modem
transportation.
              
This object is applicable when catmtCidNx64Enable is
is set to 'false'. It is used for voice trunking applications 
only.
              
This object is mandatory when adding a voice trunking CID
entry.

Context

MIB
CISCO-ATM-TRUNK-MIB
OID
.1.3.6.1.4.1.9.9.351.1.1.1.1.9
Type
column
Access
readwrite
Status
current
Parent
catmtCidEntry
Table
catmtCidTable
Siblings
15

Syntax

CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate
Source
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate
Base type
Enumeration

Values & Constraints

Type Values
1other
2fax2400
3fax4800
4fax7200
5fax9600
6fax14400
7fax12000
10g729r8000
11g729Ar8000
12g726r16000
13g726r24000
14g726r32000
15g711ulawr64000
16g711Alawr64000
17g728r16000
18g723r6300
19g723r5300
20gsmr13200
21g729Br8000
22g729ABr8000
23g723Ar6300
24g723Ar5300
25ietfg729r8000
26gsmeEr12200
27clearChannel
28g726r40000
29llcc
30gsmAmrNb
31g722
32iLBC
33iLBCr15200
34iLBCr13330
35g722r4800
36g722r5600
37g722r6400
38iSAC
39aaclc
40aacld

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
catmtCidVpi
This object is the VPI value of an ATM PVC connection.
columnUnsigned32.1.3.6.1.4.1.9.9.351.1.1.1.1.1
catmtCidNx64Enable
This object specifies whether a CID entry is in the Nx64 packet stream mode. When this object is set to 'false', the CID connection is for voice trunking applicat…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.351.1.1.1.1.10
catmtCidNx64Profile
This object specifies the Nx64 data profile for an AAL2 data trunking connection. The value of this object is a valid index of the cdapNx64ProfileTable in the CISC…
columnInteger32.1.3.6.1.4.1.9.9.351.1.1.1.1.11
catmtCidStateBitMap
This object is used to indicate the state of the CID. All bits setting to 0 which means status 'okay'.
columnBits.1.3.6.1.4.1.9.9.351.1.1.1.1.12
catmtCidRepetition
This object is used to repeatedly apply the writable objects of catmtCidTable specified in the same SNMP PDU starting from the row defined by the index object for the number of …
columnCISCO-TCConfigIterator.1.3.6.1.4.1.9.9.351.1.1.1.1.13
catmtCidRepetitionOwner
This object is used for error reporting of the bulk provisioning operation specified by catmtCidRepetition. The value of this object is set by the SNMP manager wit…
columnRMON-MIBOwnerString.1.3.6.1.4.1.9.9.351.1.1.1.1.14
catmtCidRepetitionResult
This object indicates the result of the bulk provisioning specified in catmtCidRepetition. The format might look at (but not limited to): 'COMPLETION=<number of …
columnCISCO-TCBulkConfigResult.1.3.6.1.4.1.9.9.351.1.1.1.1.15
catmtCidRowStatus
This object is used for adding/deleting the entries from the catmtCidTable. In order to create a CID entry, the following parameters are mandatory and must be pro…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.351.1.1.1.1.16
catmtCidVci
This object is the VCI value of an ATM PVC connection.
columnUnsigned32.1.3.6.1.4.1.9.9.351.1.1.1.1.2
catmtCid
This object is the CID of an ATM AAL2 connection, it is unique within a PVC or SVC connection. The CID number at both sides of an AAL2 connection must be the same. …
columnInteger32.1.3.6.1.4.1.9.9.351.1.1.1.1.3
catmtCidDs1
The value of this object equals to the 'ifIndex' of the DS1 interface. This object is mandatory when adding a CID entry. Once a CID entry is added, this object …
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.9.9.351.1.1.1.1.4
catmtCidDs0GroupIndex
An arbitrary index that uniquely identifies a DS0 group which contains one or more DS0(s) within a DS1 interface specified by 'catmtCidDs1'. This object is mandat…
columnInteger32.1.3.6.1.4.1.9.9.351.1.1.1.1.5
catmtCidProfileType
This object specifies the type of the AAL2 CODEC profile. The combination of the profile type and profile number specified by 'catmtCidProfileNumber' defines an AAL2 CODEC profi…
columnCISCO-VOICE-AALX-PROFILE-MIBCiscoAal2ProfileType.1.3.6.1.4.1.9.9.351.1.1.1.1.6
catmtCidProfileNumber
This object specifies the AAL2 CODEC profile number. The combination of profile type and profile number defines an AAL2 CODEC profile. A profile contains one or m…
columnCISCO-VOICE-AALX-PROFILE-MIBCiscoAal2ProfileNumber.1.3.6.1.4.1.9.9.351.1.1.1.1.7
catmtCidVoiceCodec
This object specifies the CODEC type used for the AAL2 trunking connection. The following table lists the CODEC types specified in each profile table by ITU I.366.…
columnCISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate.1.3.6.1.4.1.9.9.351.1.1.1.1.8