catmtCidNx64Enable
CISCO-ATM-TRUNK-MIB ·
.1.3.6.1.4.1.9.9.351.1.1.1.1.10
Object
This object specifies whether a CID entry is in the Nx64
packet stream mode.
When this object is set to 'false', the CID connection is
for voice trunking applications only; when it is set to
'true', the CID connection is for data trunking using
Nx64 packet stream (N>=1).
This object can not be modified.
Context
- MIB
- CISCO-ATM-TRUNK-MIB
- OID
.1.3.6.1.4.1.9.9.351.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- catmtCidEntry
- Table
- catmtCidTable
- Siblings
- 15
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| catmtCidVpi This object is the VPI value of an ATM PVC connection. | column | Unsigned32 | .1.3.6.1.4.1.9.9.351.1.1.1.1.1 |
| catmtCidNx64Profile This object specifies the Nx64 data profile for an AAL2
data trunking connection.
The value of this object is a valid index of the
cdapNx64ProfileTable in the CISC… | column | Integer32 | .1.3.6.1.4.1.9.9.351.1.1.1.1.11 |
| catmtCidStateBitMap This object is used to indicate the state of the CID.
All bits setting to 0 which means status 'okay'. | column | Bits | .1.3.6.1.4.1.9.9.351.1.1.1.1.12 |
| catmtCidRepetition This object is used to repeatedly apply the writable objects
of catmtCidTable specified in the same SNMP PDU starting
from the row defined by the index object for the number of
… | column | CISCO-TCConfigIterator | .1.3.6.1.4.1.9.9.351.1.1.1.1.13 |
| catmtCidRepetitionOwner This object is used for error reporting of the bulk
provisioning operation specified by catmtCidRepetition.
The value of this object is set by the SNMP manager wit… | column | RMON-MIBOwnerString | .1.3.6.1.4.1.9.9.351.1.1.1.1.14 |
| catmtCidRepetitionResult This object indicates the result of the bulk provisioning
specified in catmtCidRepetition.
The format might look at (but not limited to):
'COMPLETION=<number of … | column | CISCO-TCBulkConfigResult | .1.3.6.1.4.1.9.9.351.1.1.1.1.15 |
| catmtCidRowStatus This object is used for adding/deleting the entries from the
catmtCidTable.
In order to create a CID entry, the following parameters are
mandatory and must be pro… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.351.1.1.1.1.16 |
| catmtCidVci This object is the VCI value of an ATM PVC connection. | column | Unsigned32 | .1.3.6.1.4.1.9.9.351.1.1.1.1.2 |
| catmtCid This object is the CID of an ATM AAL2 connection,
it is unique within a PVC or SVC connection.
The CID number at both sides of an AAL2 connection
must be the same. … | column | Integer32 | .1.3.6.1.4.1.9.9.351.1.1.1.1.3 |
| catmtCidDs1 The value of this object equals to the 'ifIndex' of the
DS1 interface.
This object is mandatory when adding a CID entry. Once a
CID entry is added, this object … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.351.1.1.1.1.4 |
| catmtCidDs0GroupIndex An arbitrary index that uniquely identifies a DS0 group
which contains one or more DS0(s) within a DS1 interface
specified by 'catmtCidDs1'.
This object is mandat… | column | Integer32 | .1.3.6.1.4.1.9.9.351.1.1.1.1.5 |
| catmtCidProfileType This object specifies the type of the AAL2 CODEC profile.
The combination of the profile type and profile number
specified by 'catmtCidProfileNumber' defines an AAL2
CODEC profi… | column | CISCO-VOICE-AALX-PROFILE-MIBCiscoAal2ProfileType | .1.3.6.1.4.1.9.9.351.1.1.1.1.6 |
| catmtCidProfileNumber This object specifies the AAL2 CODEC profile number.
The combination of profile type and profile number defines
an AAL2 CODEC profile.
A profile contains one or m… | column | CISCO-VOICE-AALX-PROFILE-MIBCiscoAal2ProfileNumber | .1.3.6.1.4.1.9.9.351.1.1.1.1.7 |
| catmtCidVoiceCodec This object specifies the CODEC type used for the AAL2
trunking connection.
The following table lists the CODEC types specified
in each profile table by ITU I.366.… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate | .1.3.6.1.4.1.9.9.351.1.1.1.1.8 |
| catmtCidVBDCodec This object specifies the CODEC type to be used for Voice
Band Data (VBD) upspeed.
Upspeed is to change the transmission rate of a voice
interface to a higher rate … | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate | .1.3.6.1.4.1.9.9.351.1.1.1.1.9 |