cApsStatusPSBFs
CISCO-APS-MIB ·
.1.3.6.1.4.1.9.10.71.1.2.1.6
Object
column
SNMPv2-SMICounter32
A count of Protection Switch Byte Failure conditions. This condition occurs when either an inconsistent APS byte or an invalid code is detected. An inconsistent APS byte occurs when no three consecutive K1 bytes of the last 12 successive frames are identical, starting with the last frame containing a previously consistent byte. An invalid code occurs when the incoming K1 byte contains an unused code or a code irrelevant for the specific switching operation (e.g., Reverse Request while no switching request is outstanding) in three consecutive frames. An invalid code also occurs when the incoming K1 byte contains an invalid channel number in three consecutive frames.
Context
- MIB
- CISCO-APS-MIB
- OID
.1.3.6.1.4.1.9.10.71.1.2.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cApsStatusEntry
- Table
- cApsStatusTable
- Siblings
- 7
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cApsStatusK1K2Rcv The current value of the K1 and K2 bytes received on
the protection channel. | column | CApsK1K2 | .1.3.6.1.4.1.9.10.71.1.2.1.1 |
| cApsStatusK1K2Trans The current value of the K1 and K2 bytes transmitted
on the protection channel. | column | CApsK1K2 | .1.3.6.1.4.1.9.10.71.1.2.1.2 |
| cApsStatusCurrent The current status of the APS group.
modeMismatch
Modes other than 1+1 unidirectional monitor protection
line K2 bit 5, which indicates the architect… | column | Bits | .1.3.6.1.4.1.9.10.71.1.2.1.3 |
| cApsStatusModeMismatches A count of Mode Mismatch conditions. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.4 |
| cApsStatusChannelMismatches A count of Channel Mismatch conditions. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.5 |
| cApsStatusFEPLFs A count of Far-End Protection-Line Failure conditions.
This condition is declared based on receiving SF on
the protection line in the K1 byte. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.7 |
| cApsStatusSwitchedChannel This field is set to the number of the channel that is
currently switched to protection. The value 0 indicates
no channel is switched to protection. The values 1-14
indicate that … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.71.1.2.1.8 |