cApsStatusK1K2Rcv
CISCO-APS-MIB ·
.1.3.6.1.4.1.9.10.71.1.2.1.1
Object
column
CApsK1K2
The current value of the K1 and K2 bytes received on the protection channel.
Context
- MIB
- CISCO-APS-MIB
- OID
.1.3.6.1.4.1.9.10.71.1.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cApsStatusEntry
- Table
- cApsStatusTable
- Siblings
- 7
Syntax
CApsK1K2
- Source
- CApsK1K2
- Base type
OctetString
Values & Constraints
Type Constraints
range: 2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cApsStatusK1K2Trans The current value of the K1 and K2 bytes transmitted
on the protection channel. | column | CApsK1K2 | .1.3.6.1.4.1.9.10.71.1.2.1.2 |
| cApsStatusCurrent The current status of the APS group.
modeMismatch
Modes other than 1+1 unidirectional monitor protection
line K2 bit 5, which indicates the architect… | column | Bits | .1.3.6.1.4.1.9.10.71.1.2.1.3 |
| cApsStatusModeMismatches A count of Mode Mismatch conditions. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.4 |
| cApsStatusChannelMismatches A count of Channel Mismatch conditions. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.5 |
| cApsStatusPSBFs A count of Protection Switch Byte Failure conditions.
This condition occurs when either an inconsistent APS
byte or an invalid code is detected. An inconsistent
APS byte occurs wh… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.6 |
| cApsStatusFEPLFs A count of Far-End Protection-Line Failure conditions.
This condition is declared based on receiving SF on
the protection line in the K1 byte. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.2.1.7 |
| cApsStatusSwitchedChannel This field is set to the number of the channel that is
currently switched to protection. The value 0 indicates
no channel is switched to protection. The values 1-14
indicate that … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.71.1.2.1.8 |