cApsConfigExtraTraffic
CISCO-APS-MIB ·
.1.3.6.1.4.1.9.10.71.1.1.2.1.6
Object
column
r/w
Enumeration
This object enables or disables the transfer of extra
traffic on the protection channel in a 1:n architecture.
This object must be set to disabled if the architecture
is 1+1. It may be necessary to disable this in order to
interwork with other SONET network elements that don't
support extra traffic.
This object may not be modified if the associated
cApsConfigRowStatus object is equal to active(1).
Context
- MIB
- CISCO-APS-MIB
- OID
.1.3.6.1.4.1.9.10.71.1.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cApsConfigEntry
- Table
- cApsConfigTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cApsConfigName A textual name for the APS group. | column | OctetString | .1.3.6.1.4.1.9.10.71.1.1.2.1.1 |
| cApsConfigCreationTime The value of sysUpTime at the time the row was
created | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.71.1.1.2.1.10 |
| cApsConfigRowStatus The status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated cAps… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.71.1.1.2.1.2 |
| cApsConfigMode The architecture of the APS group.
onePlusOne
The 1+1 architecture permanently bridges the working
line to the protection line.
oneToN… | column | Enumeration | .1.3.6.1.4.1.9.10.71.1.1.2.1.3 |
| cApsConfigRevert The revertive mode of the APS group.
nonrevertive
Traffic remains on the protection line until another
switch request is received.
re… | column | Enumeration | .1.3.6.1.4.1.9.10.71.1.1.2.1.4 |
| cApsConfigDirection The directional mode of the APS group.
unidirectional
The unidirectional mode provides protection in one
direction.
bidirectional
… | column | Enumeration | .1.3.6.1.4.1.9.10.71.1.1.2.1.5 |
| cApsConfigSdBerThreshold The Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent
of 10 for computing the threshold value for the Bit Error
Rate (BER). Fo… | column | Integer32 | .1.3.6.1.4.1.9.10.71.1.1.2.1.7 |
| cApsConfigSfBerThreshold The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent
of 10 for computing the threshold value for the Bit Error
Rate (BER). Fo… | column | Integer32 | .1.3.6.1.4.1.9.10.71.1.1.2.1.8 |
| cApsConfigWaitToRestore The Wait To Restore period in seconds.
After clearing of a condition that necessitated an
automatic switch, the wait to restore period must elapse
before reverting.… | column | seconds Integer32 | .1.3.6.1.4.1.9.10.71.1.1.2.1.9 |