cApsChanStatusSignalFailures
CISCO-APS-MIB ·
.1.3.6.1.4.1.9.10.71.1.6.1.3
Object
column
SNMPv2-SMICounter32
A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, loss of frame, AIS-L or a Line bit error rate exceeding 10^-3 is detected on an incoming line.
Context
- MIB
- CISCO-APS-MIB
- OID
.1.3.6.1.4.1.9.10.71.1.6.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cApsChanStatusEntry
- Table
- cApsChanStatusTable
- Siblings
- 5
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cApsChanStatusCurrent Indicates the current state of the port.
lockedOut
This bit, when applied to a working channel, indicates
that the channel is prevented from switchin… | column | Bits | .1.3.6.1.4.1.9.10.71.1.6.1.1 |
| cApsChanStatusSignalDegrades A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.2 |
| cApsChanStatusSwitchovers The number of times this channel has switched to the
protection line. When queried with index value
cApsChanConfigNumber set to 0, which is the
protection line, this object will … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.4 |
| cApsChanStatusLastSwitchover The value of sysUpTime when this channel last completed
a switch to the protection line. If this channel has
never switched to the protection line, or this channel
is the protecti… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.71.1.6.1.5 |
| cApsChanStatusSwitchoverSeconds The cumulative Protection Switching Duration (PSD) time
in seconds. For a working channel, this is the cumulative
number of seconds that service was carried on the protection
line… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.6 |