cApsChanStatusCurrent
CISCO-APS-MIB ·
.1.3.6.1.4.1.9.10.71.1.6.1.1
Object
column
Bits
Indicates the current state of the port.
lockedOut
This bit, when applied to a working channel, indicates
that the channel is prevented from switching to the
protection line. When applied to the null channel, this
bit indicates that no working channel may switch to the
protection line.
sd
A signal degrade condition is in effect.
sf
A signal failure condition is in effect.
switched
The switched bit is applied to a working channel if that
channel is currently switched to the protection line.
Context
- MIB
- CISCO-APS-MIB
- OID
.1.3.6.1.4.1.9.10.71.1.6.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cApsChanStatusEntry
- Table
- cApsChanStatusTable
- Siblings
- 5
Syntax
Bits
Values & Constraints
Enumerated Values
0 | lockedOut |
1 | sd |
2 | sf |
3 | switched |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cApsChanStatusSignalDegrades A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.2 |
| cApsChanStatusSignalFailures A count of Signal Failure conditions that have been
detected on the incoming signal. This condition occurs
when a loss of signal, loss of frame, AIS-L or a Line
bit error rate exc… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.3 |
| cApsChanStatusSwitchovers The number of times this channel has switched to the
protection line. When queried with index value
cApsChanConfigNumber set to 0, which is the
protection line, this object will … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.4 |
| cApsChanStatusLastSwitchover The value of sysUpTime when this channel last completed
a switch to the protection line. If this channel has
never switched to the protection line, or this channel
is the protecti… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.71.1.6.1.5 |
| cApsChanStatusSwitchoverSeconds The cumulative Protection Switching Duration (PSD) time
in seconds. For a working channel, this is the cumulative
number of seconds that service was carried on the protection
line… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.71.1.6.1.6 |