cAdslLineDmtConfOperatingMode
CISCO-ADSL-DMT-LINE-MIB ·
.1.3.6.1.4.1.9.9.130.1.14.1.1
Object
column
r/w
Enumeration
This object specifies the line operating mode being employed
by the ADSL line. An ADSL line uses of one of two operating
modes:
- Automatic
An ATU-C that employs this operating mode automatically
detects the capabilities of the ATU-R and utilizes either
a startup sequence specified by G.992.1, G.992.2, or
T1.413-1998. This line operating mode is the default for
an ADSL line.
- Splitterless
This operating mode should no longer be used. It is
equivalent to the G.992.2 selection. Selecting this
mode will automatically map to the G992.2 mode. It is
appropriate in this case that both the ATU-C and ATU-R
support 'heavy' capability but the ATU-C side wishes to
force 'lite' operation. Selecting this mode will
automatically convert to the G992.2 mode.
- G992.1
This operating mode forces the used of the G994.1 startup
sequence and compliance to G992.1 operation.
- G992.2
This operating mode forces the use of the G994.1
startup sequence and compliance to G992.2 operation.
It is appropriate in this case that both the ATU-C and
ATU-R support 'heavy' capability but the ATU-C side
wishes to force 'lite' operation.
- T1.413
This operating mode forces the ATU-R to use the
T1.413-1998 startup sequence.
Context
- MIB
- CISCO-ADSL-DMT-LINE-MIB
- OID
.1.3.6.1.4.1.9.9.130.1.14.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cAdslDmtLineConfProfileEntry
- Table
- cAdslDmtLineConfProfileTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | automatic |
2 | splitterless |
3 | g992Dot1 |
4 | g992Dot2 |
5 | t1Dot413 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cAdslAturDmtConfFastFecSize This object specifies the initial number of FEC redundancy
bytes the ATU-R appends to upstream frames transmitted over
the fast channel during the training sequence. The ATU-C ca… | column | bytes DmtFecSize | .1.3.6.1.4.1.9.9.130.1.14.1.10 |
| cAdslAturDmtConfInterleaveFecSize This object specifies the initial number of FEC redundancy
bytes the ATU-R appends to upstream frames transmitted over
the interleaved channel during the training sequence. The
A… | column | bytes DmtFecSize | .1.3.6.1.4.1.9.9.130.1.14.1.11 |
| cAdslAturDmtConfCodewordSize This object specifies the number of symbols per codeword being
used by the ATU-R for upstream messages on an interleaved
channel during the training sequence. The ATU-C can force… | column | symbols DmtCodewordSize | .1.3.6.1.4.1.9.9.130.1.14.1.12 |
| cAdslAtucDmtConfMinrateBlock This object is used to implement min-rate blocking on DMT
interfaces that support this option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.130.1.14.1.13 |
| cAdslAtucDmtDualBitmapEnabled This object is used to implement dual bitmap tables for
Annex C compliant DMT interfaces. The bin data for
the DSL interface will appear in cAdslAturDmtBinTable
and cAdslAtucDmt… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.130.1.14.1.14 |
| cAdslLineDmtConfTrainingMode This object specifies the mode employed by the ATU-C and
ATU-R when training against each other. One of two training
modes can be employed:
- Standard
An ATU-C… | column | Enumeration | .1.3.6.1.4.1.9.9.130.1.14.1.2 |
| cAdslAtucDmtConfFastFecSize This object specifies the initial number of FEC redundancy
bytes the ATU-C appends to downstream frames transmitted over
the fast channel during the training sequence. The ATU-C … | column | bytes DmtFecSize | .1.3.6.1.4.1.9.9.130.1.14.1.3 |
| cAdslAtucDmtConfInterleaveFecSize This object specifies the initial number of FEC redundancy
bytes the ATU-C appends to downstream frames transmitted over
the interleaved channel during the training sequence. The… | column | bytes DmtFecSize | .1.3.6.1.4.1.9.9.130.1.14.1.4 |
| cAdslAtucDmtConfCodewordSize This object specifies the number of symbols per codeword being
used by the ATU-C for downstream messages on an interleaved
channel during the training sequence. The ATU-C can fal… | column | symbols DmtCodewordSize | .1.3.6.1.4.1.9.9.130.1.14.1.5 |
| cAdslAtucDmtConfOverheadFraming This object specifies the overhead framing structure which the
ATU-C will request when establishing a link with the ATU-R.
The value of 'structure0' is not valid. | column | DmtOverheadFraming | .1.3.6.1.4.1.9.9.130.1.14.1.6 |
| cAdslAtucDmtConfBitSwapEnabled This object specifies whether the ATU-C performs bitswapping.
Bitswapping attempts to maintain an acceptable margin for
each bin; equalizing the margin across all bins through bit… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.130.1.14.1.7 |
| cAdslAtucDmtConfBitSwapFrom Bitswapping attempts to maintain an acceptable margin for
each bin; equalizing the margin across all bins through bit
reallocation, thereby maximizing error performance.
… | column | dB Integer32 | .1.3.6.1.4.1.9.9.130.1.14.1.8 |
| cAdslAtucDmtConfBitSwapTo Bitswapping attempts to maintain an acceptable margin for
each bin; equalizing the margin across all bins through bit
reallocation, thereby maximizing error performance.
… | column | dB Integer32 | .1.3.6.1.4.1.9.9.130.1.14.1.9 |