cAdslAturDmtChanTable
CISCO-ADSL-DMT-LINE-MIB ·
.1.3.6.1.4.1.9.9.130.1.5
Object
table
This table extends the adslAturChanTable and contains enterprise-specific physical layer parameters for the ATU-R channels supported by the system.
Context
- MIB
- CISCO-ADSL-DMT-LINE-MIB
- OID
.1.3.6.1.4.1.9.9.130.1.5- Type
- table
- Status
- current
- Parent
- ciscoAdslDmtLineMIBObjects
- Siblings
- 10
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cAdslDmtLineTable This table extends the adslLineTable and contains enterprise-
specific common attributes describing both ends of ADSL lines
supported by the system. | table | - | .1.3.6.1.4.1.9.9.130.1.1 |
| cAdslDmtLineConfProfileTable This table extends the adslLineConfProfileTable and contains
enterprise-specific ADSL DMT line configuration information. | table | - | .1.3.6.1.4.1.9.9.130.1.14 |
| cAdslDmtLineAlarmConfProfileTable This table extends the adslLineAlarmConfProfileTable and
contains enterprise-specific ADSL line configuration information
pertaining to alarms. | table | - | .1.3.6.1.4.1.9.9.130.1.15 |
| cAdslDmtBinIfNumber The cAdslDmtBinIfNumber is used to set the ifIndex for
for which DMT bin information will be collected in
cAdslAtucDmtBinTable and cAdslAturDmtBinTable. The
request will be pro… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.130.1.16 |
| cAdslDmtBinIfRqstStatus This object initiates the polling and stores the status
of the last DMT Bin request. This object can have the
following values :
reset (-1) : write this value to reset … | scalar | Enumeration | .1.3.6.1.4.1.9.9.130.1.17 |
| cAdslDmtBinIfLstRqstUpldTime cAdslDmtBinIfLstRqstUpldTime stores the time and date
when the last successful upload request was done. This
field is used to determine the age of DMT Bin data
in the cAdslAtucD… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.130.1.18 |
| cAdslAtucDmtBinTable This table contains information on the 256 DMT bins in
the downstream direction. Bins correspond to 4 kHz slots
on a trained DSL line modem. The information stored in
each bin… | table | - | .1.3.6.1.4.1.9.9.130.1.19 |
| cAdslAtucDmtPhysTable This table extends the adslAtucPhysTable and contains
enterprise-specific physical layer parameters for ATU-C
class devices supported by the system. | table | - | .1.3.6.1.4.1.9.9.130.1.2 |
| cAdslAturDmtBinTable This table contains information for the 32 DMT bins in
the upstream direction. A bin corresponds to a 4 kHz slots
on a trained DSL line modem. The information stored in each
bin… | table | - | .1.3.6.1.4.1.9.9.130.1.20 |
| cAdslAtucDmtChanTable This table extends the adslAtucChanTable and contains
enterprise-specific physical layer parameters for the ATU-C
channels supported by the system. | table | - | .1.3.6.1.4.1.9.9.130.1.4 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cAdslAturDmtChanEntry A set of enterprise-specific physical-layer parameters for an
ATU-R channel supported by the system. There exists an entry
for each ifEntry with an ifType of adslInterleave(124)… | row | - | .1.3.6.1.4.1.9.9.130.1.5.1 |