caAclIPV6ACESourcePrefixLength
CISCO-ACL-MIB ·
.1.3.6.1.4.1.9.9.808.1.1.3.1.5
Object
column
r/w
Integer32
This object determines the number of bits in the field
caAclIPV6ACLSourceAddress to be checked.
If the value of this object is 0, then the source address
in the packet must match caAclIPV6ACESourceAddress exactly
for the ACE action to be taken.
Context
- MIB
- CISCO-ACL-MIB
- OID
.1.3.6.1.4.1.9.9.808.1.1.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- caAclIPV6ACECfgTableEntry
- Table
- caAclIPV6ACECfgTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caAclIPV6ACESequenceNumber This object uniquely identifies an ACE within an ACL. Sequence
numbers are assigned to each permit/deny statement, causing the
system to insert the statement in that numbered posi… | column | CaAclSequenceNumber | .1.3.6.1.4.1.9.9.808.1.1.3.1.1 |
| caAclIPV6ACESourcePortGroup This object defines the Source Port Object Group from which
the packet is being sent. | column | OctetString | .1.3.6.1.4.1.9.9.808.1.1.3.1.10 |
| caAclIPV6ACEDestinationAddress This object determines the address of the network or host to
which the packet is being sent. If this object value is 0::0
and the value of caAclIPV6ACLSourcePrefixLength is 0 then… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.808.1.1.3.1.11 |
| caAclIPV6ACEDestinationPrefixLength This object determines the number of bits in the field
caAclIPV6ACLDestinationAddress to be checked.
If the value of this object is 0, then the source address
in th… | column | Integer32 | .1.3.6.1.4.1.9.9.808.1.1.3.1.12 |
| caAclIPV6ACEDestinationNetworkGroup This object defines the Source Network Object Group to which
the packet is being sent. | column | OctetString | .1.3.6.1.4.1.9.9.808.1.1.3.1.13 |
| caAclIPV6ACEDestinationPortOperator This object defines the operation to be performed to the layer
destination port field. Source port fields are present only for
IGMP, ICMP, SCTP, TCP, and UDP protocols.
… | column | CaAclPortOperator | .1.3.6.1.4.1.9.9.808.1.1.3.1.14 |
| caAclIPV6ACEDestinationPort This object defines the destination port number of the layer
4 protocol. This is the field to be matched with the specified
destination port based on the caAclIPV6ACLSourceOperato… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.808.1.1.3.1.15 |
| caAclIPV6ACEDestinationPortUpper This object defines the inclusive upper bound of the layer 4
destination port range that is to be matched. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.808.1.1.3.1.16 |
| caAclIPV6ACEDestinationPortGroup This object defines the Source Port Object Group to which the
packet is being sent. | column | OctetString | .1.3.6.1.4.1.9.9.808.1.1.3.1.17 |
| caAclIPV6ACETrafficClassValue This object defines the traffic class value that will be
considered in the match criteria against the value in the
packet. | column | Unsigned32 | .1.3.6.1.4.1.9.9.808.1.1.3.1.18 |
| caAclIPV6ACETcpFlagsValue This object defines the value of the TCP flags which will
be considered in the match criteria based on
caAclIPV6ACLTcpFlagsMatchType.
Users can select any desired combination of t… | column | Unsigned32 | .1.3.6.1.4.1.9.9.808.1.1.3.1.19 |
| caAclIPV6ACEAction This object indicates the type of action to be taken if the
packet matches the given criteria.
If it is set to permit(1), all packets matching this ACE will
be allo… | column | CaAclAction | .1.3.6.1.4.1.9.9.808.1.1.3.1.2 |
| caAclIPV6ACETcpFlagsMask This object defines the mask value of the TCP flags field. | column | Unsigned32 | .1.3.6.1.4.1.9.9.808.1.1.3.1.20 |
| caAclIPV6ACETcpFlagsMatchType This object defines the type of matching to be done on the
TCP flags field. | column | CaAclTcpFlagsMatch | .1.3.6.1.4.1.9.9.808.1.1.3.1.21 |
| caAclIPV6ACELogOption This object defines the value of the log option field to be
applied to packets that match this ACE entry. | column | CaAclLogOption | .1.3.6.1.4.1.9.9.808.1.1.3.1.22 |
| caAclIPV6ACECounterLabel This object defines the counter label name for this ACE.
ACEs that share the same counter label name will have their
hit counts aggregated into the same counter label name. | column | OctetString | .1.3.6.1.4.1.9.9.808.1.1.3.1.23 |
| caAclIPV6ACERemark This object defines a comment in the ACL. It helps the user
to define some meaningful comment to identify the ACE
quickly, or to know the purpose of a set of ACEs.
This field is … | column | OctetString | .1.3.6.1.4.1.9.9.808.1.1.3.1.24 |
| caAclIPV6ACERowStatus This object is used to create, modify, or delete an entry
in the caAclIPV6ACLTable.
A row can be created using the 'CreateAndGo' option. When the
row is successfull… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.808.1.1.3.1.25 |
| caAclIPV6ACEProtocol This object identifies the protocol type to be filtered by
the ACE. Protocol numbers are defined in the Network Working
Group Request For Comment (RFC) documents. | column | CISCO-TCCiscoIpProtocol | .1.3.6.1.4.1.9.9.808.1.1.3.1.3 |
| caAclIPV6ACESourceAddress This object determines the address of the network or host from
which the packet is being sent. If this object value is 0::0
and the value of caAclIPV6ACLSourcePrefixLength is 0 th… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.808.1.1.3.1.4 |
| caAclIPV6ACESourceNetworkGroup This object defines the Source Network Object Group from
which the packet is being sent. | column | OctetString | .1.3.6.1.4.1.9.9.808.1.1.3.1.6 |
| caAclIPV6ACESourcePortOperator This object defines the operation to be performed to the layer
source port field. Source port fields are present only for
IGMP, ICMP, SCTP, TCP, and UDP protocols.
… | column | CaAclPortOperator | .1.3.6.1.4.1.9.9.808.1.1.3.1.7 |
| caAclIPV6ACESourcePort This object defines the source port number of the layer 4
protocol. This is the field to be matched with the specified
source port based on the caAclIPV6ACLSourceOperator. If
caAc… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.808.1.1.3.1.8 |
| caAclIPV6ACESourcePortUpper This object defines the inclusive upper bound of the layer 4
source port range that is to be matched. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.808.1.1.3.1.9 |