caAclIPV6ACEProtocol

CISCO-ACL-MIB · .1.3.6.1.4.1.9.9.808.1.1.3.1.3

Object

column r/w CISCO-TCCiscoIpProtocol

This object identifies the protocol type to be filtered by
the ACE. Protocol numbers are defined in the Network Working
Group Request For Comment (RFC) documents.

Context

MIB: CISCO-ACL-MIB
OID: .1.3.6.1.4.1.9.9.808.1.1.3.1.3
Type: column
Access: readwrite
Status: current
Parent: caAclIPV6ACECfgTableEntry
Table: caAclIPV6ACECfgTable
Siblings: 24

Syntax

CISCO-TCCiscoIpProtocol

Source: CISCO-TCCiscoIpProtocol
Base type: Integer32

Values & Constraints

Type Constraints

range: 0..255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
caAclIPV6ACESequenceNumber This object uniquely identifies an ACE within an ACL. Sequence numbers are assigned to each permit/deny statement, causing the system to insert the statement in that numbered posi…	column	CaAclSequenceNumber	`.1.3.6.1.4.1.9.9.808.1.1.3.1.1`
caAclIPV6ACESourcePortGroup This object defines the Source Port Object Group from which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.3.1.10`
caAclIPV6ACEDestinationAddress This object determines the address of the network or host to which the packet is being sent. If this object value is 0::0 and the value of caAclIPV6ACLSourcePrefixLength is 0 then…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.808.1.1.3.1.11`
caAclIPV6ACEDestinationPrefixLength This object determines the number of bits in the field caAclIPV6ACLDestinationAddress to be checked. If the value of this object is 0, then the source address in th…	column	Integer32	`.1.3.6.1.4.1.9.9.808.1.1.3.1.12`
caAclIPV6ACEDestinationNetworkGroup This object defines the Source Network Object Group to which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.3.1.13`
caAclIPV6ACEDestinationPortOperator This object defines the operation to be performed to the layer destination port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. …	column	CaAclPortOperator	`.1.3.6.1.4.1.9.9.808.1.1.3.1.14`
caAclIPV6ACEDestinationPort This object defines the destination port number of the layer 4 protocol. This is the field to be matched with the specified destination port based on the caAclIPV6ACLSourceOperato…	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.3.1.15`
caAclIPV6ACEDestinationPortUpper This object defines the inclusive upper bound of the layer 4 destination port range that is to be matched.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.3.1.16`
caAclIPV6ACEDestinationPortGroup This object defines the Source Port Object Group to which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.3.1.17`
caAclIPV6ACETrafficClassValue This object defines the traffic class value that will be considered in the match criteria against the value in the packet.	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.3.1.18`
caAclIPV6ACETcpFlagsValue This object defines the value of the TCP flags which will be considered in the match criteria based on caAclIPV6ACLTcpFlagsMatchType. Users can select any desired combination of t…	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.3.1.19`
caAclIPV6ACEAction This object indicates the type of action to be taken if the packet matches the given criteria. If it is set to permit(1), all packets matching this ACE will be allo…	column	CaAclAction	`.1.3.6.1.4.1.9.9.808.1.1.3.1.2`
caAclIPV6ACETcpFlagsMask This object defines the mask value of the TCP flags field.	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.3.1.20`
caAclIPV6ACETcpFlagsMatchType This object defines the type of matching to be done on the TCP flags field.	column	CaAclTcpFlagsMatch	`.1.3.6.1.4.1.9.9.808.1.1.3.1.21`
caAclIPV6ACELogOption This object defines the value of the log option field to be applied to packets that match this ACE entry.	column	CaAclLogOption	`.1.3.6.1.4.1.9.9.808.1.1.3.1.22`
caAclIPV6ACECounterLabel This object defines the counter label name for this ACE. ACEs that share the same counter label name will have their hit counts aggregated into the same counter label name.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.3.1.23`
caAclIPV6ACERemark This object defines a comment in the ACL. It helps the user to define some meaningful comment to identify the ACE quickly, or to know the purpose of a set of ACEs. This field is …	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.3.1.24`
caAclIPV6ACERowStatus This object is used to create, modify, or delete an entry in the caAclIPV6ACLTable. A row can be created using the 'CreateAndGo' option. When the row is successfull…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.808.1.1.3.1.25`
caAclIPV6ACESourceAddress This object determines the address of the network or host from which the packet is being sent. If this object value is 0::0 and the value of caAclIPV6ACLSourcePrefixLength is 0 th…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.808.1.1.3.1.4`
caAclIPV6ACESourcePrefixLength This object determines the number of bits in the field caAclIPV6ACLSourceAddress to be checked. If the value of this object is 0, then the source address in the pac…	column	Integer32	`.1.3.6.1.4.1.9.9.808.1.1.3.1.5`
caAclIPV6ACESourceNetworkGroup This object defines the Source Network Object Group from which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.3.1.6`
caAclIPV6ACESourcePortOperator This object defines the operation to be performed to the layer source port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. …	column	CaAclPortOperator	`.1.3.6.1.4.1.9.9.808.1.1.3.1.7`
caAclIPV6ACESourcePort This object defines the source port number of the layer 4 protocol. This is the field to be matched with the specified source port based on the caAclIPV6ACLSourceOperator. If caAc…	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.3.1.8`
caAclIPV6ACESourcePortUpper This object defines the inclusive upper bound of the layer 4 source port range that is to be matched.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.3.1.9`