caAclIPV4ACESourceWildCardMask

CISCO-ACL-MIB · .1.3.6.1.4.1.9.9.808.1.1.2.1.5

Object

column r/w INET-ADDRESS-MIBInetAddress

This object determines the mask of wild card address bits
for caAclIPV4ACESourceAddress. Wild card masking is to indicate
to the system whether to check or ignore the corresponding
IP address bits when comparing the address bits in an ACL
to a packet being submitted to the ACL. The default wild card
mask is 0.0.0.0. The wild card mask is the inverse of a
regular subnet mask. If the mask value 0.0.0.255 is applied to
1.2.3.0.

Context

MIB: CISCO-ACL-MIB
OID: .1.3.6.1.4.1.9.9.808.1.1.2.1.5
Type: column
Access: readwrite
Status: current
Parent: caAclIPV4ACECfgTableEntry
Table: caAclIPV4ACECfgTable
Siblings: 26

Syntax

INET-ADDRESS-MIBInetAddress

Source: INET-ADDRESS-MIBInetAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
caAclIPV4ACESequenceNumber This object uniquely identifies an ACE within an ACL. Sequence numbers are assigned to each permit/deny statement, causing the system to insert the statement in that numbered posi…	column	CaAclSequenceNumber	`.1.3.6.1.4.1.9.9.808.1.1.2.1.1`
caAclIPV4ACESourcePortGroup This object defines the Source Port Object Group from which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.2.1.10`
caAclIPV4ACEDestinationAddress This object determines the address of the network or host to which the packet is being sent. If this object value is 0.0.0.0 and the value of caAclIPV4ACLDestinationWildCardMask o…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.808.1.1.2.1.11`
caAclIPV4ACEDestinationWildCardMask This object determines the mask of wild card address bits for caAclIPV4ACLDestinationAddress. Wild card masking is to indicate to the system whether to check or ignore the corresp…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.808.1.1.2.1.12`
caAclIPV4ACEDestinationNetworkGroup This object defines the Destination Network Object Group to which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.2.1.13`
caAclIPV4ACEDestinationPortOperator This object defines the operation to be performed to the layer destination port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. …	column	CaAclPortOperator	`.1.3.6.1.4.1.9.9.808.1.1.2.1.14`
caAclIPV4ACEDestinationPort This object defines the destination port number of the layer 4 protocol. This is the field to be matched with the specified destination port based on the caAclIPV4ACLSourceOperato…	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.2.1.15`
caAclIPV4ACEDestinationPortUpper This object defines the inclusive upper bound of the layer 4 destination port range that is to be matched.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.2.1.16`
caAclIPV4ACEDestinationPortGroup This object defines the Source Port Object Group to which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.2.1.17`
caAclIPV4ACEDscpValue This object defines the dscp value that will be considered in the match criteria against the value in the packet.	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.2.1.18`
caAclIPV4ACETcpFlagsValue This object defines the value of the TCP flags which will be considered in the match criteria based on caAclIPV4ACLTcpFlagsMatchType. Users can select any desired combination of t…	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.2.1.19`
caAclIPV4ACEAction This object indicates the type of action to be taken if the packet matches the given criteria. If it is set to permit(1), all packets matching this ACE will be allo…	column	CaAclAction	`.1.3.6.1.4.1.9.9.808.1.1.2.1.2`
caAclIPV4ACETcpFlagsMask This object defines the mask value of the TCP flags field.	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.2.1.20`
caAclIPV4ACETcpFlagsMatchType This object defines the type of matching to be done on the TCP flags field.	column	CaAclTcpFlagsMatch	`.1.3.6.1.4.1.9.9.808.1.1.2.1.21`
caAclIPV4ACETosValue This object defines the value of the TOS field to be filtered. Packets can be filtered by the TOS level as specified by a number from 0 to 15. Use the value 16 to indicate that th…	column	Unsigned32	`.1.3.6.1.4.1.9.9.808.1.1.2.1.22`
caAclIPV4ACEPrecedenceValue This object indicates the value of the precedence field to be filtered.	column	CaAclPrecedenceValue	`.1.3.6.1.4.1.9.9.808.1.1.2.1.23`
caAclIPV4ACELogOption This object defines the value of the log option field to be applied to packets that match this ACE entry.	column	CaAclLogOption	`.1.3.6.1.4.1.9.9.808.1.1.2.1.24`
caAclIPV4ACECounterLabel This object defines the counter label name for this ACE. ACEs that share the same counter label name will have their hit counts aggregated into the same counter label name.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.2.1.25`
caAclIPV4ACERemark This object defines a comment in the ACL. It helps the user to define some meaningful comment to identify the ACE quickly, or to know the purpose of a set of ACEs. This field is …	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.2.1.26`
caAclIPV4ACERowStatus This object is used to create, modify, or delete an entry in the caAclIPV4ACLTable. A row can be created using the 'CreateAndGo' option. When the row is successfull…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.808.1.1.2.1.27`
caAclIPV4ACEProtocol This object identifies the layer 3 protocol type to be filtered by the ACE. Protocol numbers are defined in the Network Working Group Request For Comment documents.	column	CISCO-TCCiscoIpProtocol	`.1.3.6.1.4.1.9.9.808.1.1.2.1.3`
caAclIPV4ACESourceAddress This object determines the address of the network or host from which the packet is being sent. If this object value is 0.0.0.0 and the value of caAclIPV4ACESourceWildCardMask obje…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.808.1.1.2.1.4`
caAclIPV4ACESourceNetworkGroup This object defines the Source Network Object Group from which the packet is being sent.	column	OctetString	`.1.3.6.1.4.1.9.9.808.1.1.2.1.6`
caAclIPV4ACESourcePortOperator This object defines the operation to be performed to the layer source port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. …	column	CaAclPortOperator	`.1.3.6.1.4.1.9.9.808.1.1.2.1.7`
caAclIPV4ACESourcePort This object defines the source port number of the layer 4 protocol. This is the field to be matched with the specified source port based on the caAclIPV4ACESourcePortOperator. If …	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.2.1.8`
caAclIPV4ACESourcePortUpper This object defines the inclusive upper bound of the layer 4 source port range that is to be matched.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.9.9.808.1.1.2.1.9`