caAclIPV4ACEDestinationPort

CISCO-ACL-MIB · .1.3.6.1.4.1.9.9.808.1.1.2.1.15
MIB view Table view

Object

column r/w INET-ADDRESS-MIBInetPortNumber 
This object defines the destination port number of the layer
4 protocol. This is the field to be matched with the specified
destination port based on the caAclIPV4ACLSourceOperator. If
caAclIPV4ACLDestinationOperator is range(5) then this object
will have the inclusive lower bound of the destination port
range that is to be matched.

Context

MIB
CISCO-ACL-MIB
OID
.1.3.6.1.4.1.9.9.808.1.1.2.1.15
Type
column
Access
readwrite
Status
current
Parent
caAclIPV4ACECfgTableEntry
Table
caAclIPV4ACECfgTable
Siblings
26

Syntax

INET-ADDRESS-MIBInetPortNumber
Source
INET-ADDRESS-MIBInetPortNumber
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
caAclIPV4ACESequenceNumber
This object uniquely identifies an ACE within an ACL. Sequence numbers are assigned to each permit/deny statement, causing the system to insert the statement in that numbered posi…
columnCaAclSequenceNumber.1.3.6.1.4.1.9.9.808.1.1.2.1.1
caAclIPV4ACESourcePortGroup
This object defines the Source Port Object Group from which the packet is being sent.
columnOctetString.1.3.6.1.4.1.9.9.808.1.1.2.1.10
caAclIPV4ACEDestinationAddress
This object determines the address of the network or host to which the packet is being sent. If this object value is 0.0.0.0 and the value of caAclIPV4ACLDestinationWildCardMask o…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.808.1.1.2.1.11
caAclIPV4ACEDestinationWildCardMask
This object determines the mask of wild card address bits for caAclIPV4ACLDestinationAddress. Wild card masking is to indicate to the system whether to check or ignore the corresp…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.808.1.1.2.1.12
caAclIPV4ACEDestinationNetworkGroup
This object defines the Destination Network Object Group to which the packet is being sent.
columnOctetString.1.3.6.1.4.1.9.9.808.1.1.2.1.13
caAclIPV4ACEDestinationPortOperator
This object defines the operation to be performed to the layer destination port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. …
columnCaAclPortOperator.1.3.6.1.4.1.9.9.808.1.1.2.1.14
caAclIPV4ACEDestinationPortUpper
This object defines the inclusive upper bound of the layer 4 destination port range that is to be matched.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.808.1.1.2.1.16
caAclIPV4ACEDestinationPortGroup
This object defines the Source Port Object Group to which the packet is being sent.
columnOctetString.1.3.6.1.4.1.9.9.808.1.1.2.1.17
caAclIPV4ACEDscpValue
This object defines the dscp value that will be considered in the match criteria against the value in the packet.
columnUnsigned32.1.3.6.1.4.1.9.9.808.1.1.2.1.18
caAclIPV4ACETcpFlagsValue
This object defines the value of the TCP flags which will be considered in the match criteria based on caAclIPV4ACLTcpFlagsMatchType. Users can select any desired combination of t…
columnUnsigned32.1.3.6.1.4.1.9.9.808.1.1.2.1.19
caAclIPV4ACEAction
This object indicates the type of action to be taken if the packet matches the given criteria. If it is set to permit(1), all packets matching this ACE will be allo…
columnCaAclAction.1.3.6.1.4.1.9.9.808.1.1.2.1.2
caAclIPV4ACETcpFlagsMask
This object defines the mask value of the TCP flags field.
columnUnsigned32.1.3.6.1.4.1.9.9.808.1.1.2.1.20
caAclIPV4ACETcpFlagsMatchType
This object defines the type of matching to be done on the TCP flags field.
columnCaAclTcpFlagsMatch.1.3.6.1.4.1.9.9.808.1.1.2.1.21
caAclIPV4ACETosValue
This object defines the value of the TOS field to be filtered. Packets can be filtered by the TOS level as specified by a number from 0 to 15. Use the value 16 to indicate that th…
columnUnsigned32.1.3.6.1.4.1.9.9.808.1.1.2.1.22
caAclIPV4ACEPrecedenceValue
This object indicates the value of the precedence field to be filtered.
columnCaAclPrecedenceValue.1.3.6.1.4.1.9.9.808.1.1.2.1.23
caAclIPV4ACELogOption
This object defines the value of the log option field to be applied to packets that match this ACE entry.
columnCaAclLogOption.1.3.6.1.4.1.9.9.808.1.1.2.1.24
caAclIPV4ACECounterLabel
This object defines the counter label name for this ACE. ACEs that share the same counter label name will have their hit counts aggregated into the same counter label name.
columnOctetString.1.3.6.1.4.1.9.9.808.1.1.2.1.25
caAclIPV4ACERemark
This object defines a comment in the ACL. It helps the user to define some meaningful comment to identify the ACE quickly, or to know the purpose of a set of ACEs. This field is …
columnOctetString.1.3.6.1.4.1.9.9.808.1.1.2.1.26
caAclIPV4ACERowStatus
This object is used to create, modify, or delete an entry in the caAclIPV4ACLTable. A row can be created using the 'CreateAndGo' option. When the row is successfull…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.808.1.1.2.1.27
caAclIPV4ACEProtocol
This object identifies the layer 3 protocol type to be filtered by the ACE. Protocol numbers are defined in the Network Working Group Request For Comment documents.
columnCISCO-TCCiscoIpProtocol.1.3.6.1.4.1.9.9.808.1.1.2.1.3
caAclIPV4ACESourceAddress
This object determines the address of the network or host from which the packet is being sent. If this object value is 0.0.0.0 and the value of caAclIPV4ACESourceWildCardMask obje…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.808.1.1.2.1.4
caAclIPV4ACESourceWildCardMask
This object determines the mask of wild card address bits for caAclIPV4ACESourceAddress. Wild card masking is to indicate to the system whether to check or ignore the correspondin…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.808.1.1.2.1.5
caAclIPV4ACESourceNetworkGroup
This object defines the Source Network Object Group from which the packet is being sent.
columnOctetString.1.3.6.1.4.1.9.9.808.1.1.2.1.6
caAclIPV4ACESourcePortOperator
This object defines the operation to be performed to the layer source port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. …
columnCaAclPortOperator.1.3.6.1.4.1.9.9.808.1.1.2.1.7
caAclIPV4ACESourcePort
This object defines the source port number of the layer 4 protocol. This is the field to be matched with the specified source port based on the caAclIPV4ACESourcePortOperator. If …
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.808.1.1.2.1.8
caAclIPV4ACESourcePortUpper
This object defines the inclusive upper bound of the layer 4 source port range that is to be matched.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.808.1.1.2.1.9