cwsPtpModemModemPerformanceOptimizationMode

CIENA-WS-PTP-MODEM-MIB · .1.3.6.1.4.1.1271.3.4.9.8.1.3
MIB view Table view

Object

column r/w Enumeration 
Performance Optimization. It optimizes for either reach or latency. Default is reach.

Context

MIB
CIENA-WS-PTP-MODEM-MIB
OID
.1.3.6.1.4.1.1271.3.4.9.8.1.3
Type
column
Access
readwrite
Status
current
Parent
cwsPtpModemModemEntry
Table
cwsPtpModemModemTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
0reach
1latency
2fasttracking
3improvedtracking
4mode5
5mode6
6mode7
7mode8
8mode9
9mode10
10mode11
11mode12
12mode13
13mode14

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cwsPtpModemModemTableSnmpKey
Unique key for cwsPtpModemModem
columnInteger32.1.3.6.1.4.1.1271.3.4.9.8.1.1
cwsPtpModemModemTxTuningMode
This is the Tuning Mode, which can be set as performance-optimized (normal) or accelerated tuning mode. Default is performance-optimized
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.10
cwsPtpModemModemDifferentialEncoding
This parameter is used to configure which differential encoding mode to apply to the OTM signal. It can be set as None, Hard, Soft, Xd. Default is none.
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.11
cwsPtpModemModemTxCompensationDispersionMode
Tx Compensation Dispersion Mode. Default is Off.
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.12
cwsPtpModemModemTxCompensationDispersionValue
Tx compensation dispersion value range from -40000 ps/nm to 85000 ps/nm. Default is 0
columnCIENA-WS-TYPEDEFS-MIBDecimal1Dig.1.3.6.1.4.1.1271.3.4.9.8.1.13
cwsPtpModemModemFastReceiverRecoveryState obsolete
Whether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values. This…
columnCIENA-WS-TYPEDEFS-MIBEnabledDisabledEnum.1.3.6.1.4.1.1271.3.4.9.8.1.14
cwsPtpModemModemLaserCenteringRange
This parameter is used to configure the laser centering range.
columnCIENA-WS-TYPEDEFS-MIBDecimal1Dig.1.3.6.1.4.1.1271.3.4.9.8.1.15
cwsPtpModemModemChannelContentionDetectionAvoidance
Turns the channel contention detection and avoidance feature on or off. This feature is used to detect the situation where the modem port turn on a wavelength (or frequency in Gri…
columnCIENA-WS-TYPEDEFS-MIBOnOffEnum.1.3.6.1.4.1.1271.3.4.9.8.1.2
cwsPtpModemModemCarrierCenteringMode
This parameter is used to configure which Carrier centering mode to apply to the OTM signal. Default is mode-2.
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.4
cwsPtpModemModemInterleaverMode
The Interleaver Mode. It can be set as standard or enhanced. Default is enhanced.
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.5
cwsPtpModemModemRotation
To enable (on) or disable (off) Jones's rotation. Default is off
columnCIENA-WS-TYPEDEFS-MIBOnOffEnum.1.3.6.1.4.1.1271.3.4.9.8.1.6
cwsPtpModemModemSpectralOccupancyMode
Spectral Occupancy Mode. This is the optical channel spectral Occupancy parameter which supports two different kinds of waveforms: narrow and wide. Default is narrow. Narrow: Root…
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.7
cwsPtpModemModemTxPowerReductionState
This parameter is used to enable TX blanking functionality. Default is Off
columnCIENA-WS-TYPEDEFS-MIBEnabledDisabledEnum.1.3.6.1.4.1.1271.3.4.9.8.1.8
cwsPtpModemModemTxReductionMode
Transmit XPM reduction. It can be set as Positive, Negative or Auto. This should always be enabled (Positive). Disabling this should be done for only interworking purposes.
columnEnumeration.1.3.6.1.4.1.1271.3.4.9.8.1.9