cienaCesInputPUOperationalStatus

CIENA-CES-TIME-SYNC-MIB · .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.11
MIB view Table view

Object

column SyncRefOperationalStatus 
Operational status of this input protection unit.

Context

MIB
CIENA-CES-TIME-SYNC-MIB
OID
.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.11
Type
column
Access
readonly
Status
current
Parent
cienaCesSyncInputProtectionUnitEntry
Table
cienaCesSyncInputProtectionUnitTable
Siblings
18

Syntax

SyncRefOperationalStatus
Source
SyncRefOperationalStatus
Base type
Enumeration

Values & Constraints

Type Values
1unknown
2active
3selected
4lossofsignal
5lossofframe
6alarmindicationsignal
7hardwarefault
8hardwarenotconfigured
9qlbelowthreshold
10rxtimeout
11notauthenticated
12loopbacktx
13loopbackrx
14linkflap
15notready
16signalfailure
17warmup
18qlnotconfigured
19noconnectivity
20unsupportedhardware
21unusable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesInputPUEntityId
The unique identifier of this input protection unit.
columnInteger32.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.1
cienaCesInputPUSsmEnabled
Enable/disable reading of actual received clock quality level for this input protection unit.
columnEnumeration.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.10
cienaCesInputPUBITSSignalMode
BITS Signal Mode, set if BITS signal is used as a protection unit.
columnSyncBITSSignalMode.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.12
cienaCesInputPUBITSSignalFormat
BITS Signal Format, set if BITS signal is used as a protection unit.
columnSyncBITSSignalFormat.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.13
cienaCesInputPUBITSSignalEncoding
BITS Signal encoding, set if BITS signal is used as a protection unit.
columnSyncBITSSignalEncoding.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.14
cienaCesInputPUUserOverridePriority
The user configured override-priority of this input protection unit.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.15
cienaCesInputPUPTPEncapType
PTP Encapsulation Type, set if a PTP input is used as a protection unit.
columnSyncPTPEncapType.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.16
cienaCesInputPUGPSClockMode
GPS clock mode, set if a GPS input is used as a protection unit.
columnSyncTimingType.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.17
cienaCesInputPUGPSFreqClock
GPS frequency clock, set if a GPS input is used as a protection unit and the cienaCesInputPUGPSClockMode is set to frequency.
columnSyncGPSFreqClock.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.18
cienaCesInputPUBITSSignalSsmLocation
BITS Signal Ssm Location, set if BITS signal is used as an input reference.
columnEnumeration.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.19
cienaCesInputPUEntityName
The unique name of this input protection unit.
columnOctetString.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.2
cienaCesInputPUPGEntityName
The identifier of the input protection group(s) which this input protection unit belongs to.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.3
cienaCesInputPUTimingInterfaceName
The interface name of this input protection unit.
columnOctetString.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.4
cienaCesInputPUTimingInterfaceProtocol
The interface protocol of this input protection unit.
columnSyncInterfaceProtocol.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.5
cienaCesInputPUUserPriority
The user configured priority of this input protection unit.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.6
cienaCesInputPUOperationalQL
Operational clock quality level of this input protection unit.
columnSsmStratumLevel.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.7
cienaCesInputPUForcedQL
User configured clock quality level that this input protection unit is forced to operate at.
columnSsmStratumLevel.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.8
cienaCesInputPUReceivedQL
Actual received clock quality level of this input protection unit.
columnSsmStratumLevel.1.3.6.1.4.1.1271.2.1.28.1.1.6.1.9