cienaCesLogicalPortConfigSignalDegradeDetection
CIENA-CES-PORT-MIB ·
.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.37
Object
column
Enumeration
This object specifies if signal degrade detection is enabled or disabled on the port. And if enabled, this object specifies the technology of which signal degrade detection uses.
Context
- MIB
- CIENA-CES-PORT-MIB
- OID
.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.37- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesLogicalPortConfigEntry
- Table
- cienaCesLogicalPortConfigTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | otn |
3 | y1731SyntheticLoss |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesLogicalPortConfigPgId Port ID for the instance. Port IDs start at 1,
and may not be consecutive for each additional port.
This port ID should refer to the dot1dBasePort in the
dot1dBasePortEntry. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.1 |
| cienaCesLogicalPortConfigPortIfIndex This object indicates the corresponding ifNumber for the PGID in the standard IF-MIB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.10 |
| cienaCesPortAdminSpeed The desired speed of the port. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.11 |
| cienaCesPortOperSpeed The current operational speed of the port. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.12 |
| cienaCesPortMaxFrameSize The maximum frame size allowed on this port including jumbo frame size. | column | Integer32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.13 |
| cienaCesLogicalPortConfigEttpAid The TL1 AID of the ETTP object represented by this port.
This field is undefined if the logical port maps to a LAG. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.14 |
| cienaCesLogicalPortLastDownReason1 The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.15 |
| cienaCesLogicalPortLastDownReason2 The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.16 |
| cienaCesLogicalPortLastDownReason3 The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.17 |
| cienaCesLogicalPortMaskedDownReason The masked/debounced fault that explains why the port is down.
This field is undefined if the logical port maps to a LAG. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.18 |
| cienaCesLogicalPortFacilityLoopback The facility loopback state of the port.
This field is undefined if the logical port maps to a LAG. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.19 |
| cienaCesLogicalPortConfigPortAdminState The administrative state of the port. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.2 |
| cienaCesPortIngressRcosProfileId This object specifies the ID of the attached ingress resolved CoS profile. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.20 |
| cienaCesPortIngressRcosProfileName This object specifies the name of the attached ingress resolved CoS profile. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.21 |
| cienaCesPortIngressRcosPolicy This object specifies the ingress resolved CoS policy. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.22 |
| cienaCesLogicalPortConfigEttpId ETTP mapped to by PG-ID of the instance. ETTP IDs start at 1,
and may not be consecutive for each additional port.
An ETTP-ID of 0 denotes that the logical port is not mapped d… | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.23 |
| cienaCesLogicalPortConfigEttpType The port type for the associated ettp. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.24 |
| cienaCesLogicalPortConfigIngMirrorPort This object indicates whether ingress traffic is being
mirrored. If ingress traffic is being mirrored this object
specifies which port the traffic is being mirrored to. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.25 |
| cienaCesLogicalPortConfigEgrMirrorPort This object indicates whether egress traffic is being
mirrored. If egress traffic is being mirrored this object
specifies which port the traffic is being mirrored to. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.26 |
| cienaCesLogicalPortConfigIngFloodContainer This object indicates whether ingress flood traffic is
rate limited. If ingress flood traffic is rate limited
this object specifies the flood containment profile for
the port. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.27 |
| cienaCesLogicalPortConfigPriorityTagMode This object specifies whether the priority tag of a frame
is stripped (strip-tag) or left intact (leave-tag) upon
ingress and egress. | column | PortPriorityTagPolicy | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.28 |
| cienaCesLogicalPortConfigVidTpidCount This object specifies the number of ingress TPID-pairs (inner + outer)
configured on the port | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.29 |
| cienaCesLogicalPortConfigPortOperState The current operational state of the port. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.3 |
| cienaCesPortOperationalSpeed This object specifies the port's current bandwidth in
kilobits per second | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.30 |
| cienaCesPortOuterTpidList This object specifies the valid outer vlan tag list which can be used as egress vlan tag or outer vlan tag. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.31 |
| cienaCesPortEgressOuterTpid This object specifies the egress vlan tag. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.32 |
| cienaCesPortOuterVtagTpid This object specifies the outer vlan tag. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.33 |
| cienaCesPortAdministrativeSpeed This object specifies the port's administrative bandwidth in
kilobits per second | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.34 |
| cienaCesPortTerminalLoopbackState The terminal loopback state of the port.
This field is undefined if the logical port maps to a LAG. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.35 |
| cienaCesPortLearnLimit This object specifies learn limit count for port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.36 |
| cienaCesLogicalPortConfigSignalDegradeState The signal degrade state of the port. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.38 |
| cienaCesLogicalPortConfigPortLinkUpDownTrapState This object specifies the current value of the enterprise port traps state. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.4 |
| cienaCesLogicalPortConfigPortAllTrapState This object indicates whether the device generates traps for this port. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.5 |
| cienaCesLogicalPortConfigPortPortMacAddress This object specifies the port MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.6 |
| cienaCesLogicalPortConfigPortName A textual string containing information about the
port. This string should indicate the physical
location of the port as well. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.7 |
| cienaCesLogicalPortConfigPortDesc This object specifies the port description. | column | OctetString | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.8 |
| cienaCesLogicalPortConfigPortType The port type for the port. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.9 |