cienaCesPmAlertTcaUnits
CIENA-CES-PM ·
.1.3.6.1.4.1.1271.2.3.1.3.4.1.1.1
Object
column
PmTcaUnits
This object defines the way in which the data is used by the
Alert TCA feature for the PM instance. This specifies the way
in which the statistics samples are handled and the way in
which the alert basis and threshold values are interpreted.
When bitsPerSecond is specified, the data is intended to
represent a throughput as a rate of data in bits per second.
When analyzing samples for the Alert TCA feature, the
statistic value is internally adjusted so that it represents a
number of bits. For example a statistic that represents a
number of bytes is multiplied by 8 to determine the bit count.
The statistic value representing bits is then compared to the
boundary value derived from the alert basis and threshold
values. The alert basis and threshold values are considered
to be values representing data in bits-per-second and are not
subjected to adjustment.
Context
- MIB
- CIENA-CES-PM
- OID
.1.3.6.1.4.1.1271.2.3.1.3.4.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesPmInstanceAlertTcaEntry
- Table
- cienaCesPmInstanceAlertTcaTable
- Siblings
- 30
Syntax
PmTcaUnits
- Source
- PmTcaUnits
- Base type
Enumeration
Values & Constraints
Type Values
1 | unspecified |
2 | bitsPerSecond |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesPmAlertTcaSampleEndTime The time and date representing when the current sample
interval will end. | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.10 |
| cienaCesPmAlertTcaHighWatermarkTime The time and date representing when the high watermark value
was established. An empty string is returned if no high
watermark has been determined. | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.11 |
| cienaCesPmAlertTcaHighWatermarkStats The statistic(s) which were used by the Alert TCA feature to
establish the watermark value identified by the
cienaCesPmAlertTcaHighWatermarkValue object. Depending on the
value i… | column | PmStatBitmap | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.12 |
| cienaCesPmAlertTcaHighWatermarkValue Highest sample interval reading during the current alert
interval. This value resets to zero at the start of each
alert interval. | column | PmTcaUnsigned64 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.13 |
| cienaCesPmAlertTcaState The current alert state of the PM instance. At the end of
each alert interval, the alert high watermark is compared to
the alert boundary value to determine if the current Alert … | column | PmTcaAlertState | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.14 |
| cienaCesPmAlertTcaEventsTotal Total number of Alert TCA events that have occurred for the PM
instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.15 |
| cienaCesPmAlertTcaSamplesProcessedTotal Total Number of valid samples that have been collected used by
the Alert TCA feature on the PM instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.16 |
| cienaCesPmAlertTcaSamplesDiscardedTotal Total Number of samples that have been collected but not used
by the Alert TCA feature on the PM instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.17 |
| cienaCesPmAlertTcaSamplesProcessedCurrentInterval Number of valid samples that have been collected during the
current Alert Interval and used by the Alert TCA feature on
the PM instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.18 |
| cienaCesPmAlertTcaSamplesDiscardedCurrentInterval Number of samples that have been collected during the current
Alert Interval but not used by the Alert TCA feature on the PM
instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.19 |
| cienaCesPmAlertTcaScheme This object specifies the way in which the statistics, as
identified by cienaCesPmAlertTcaStatistics object, are used by
the Alert TCA feature for the PM instance. | column | PmTcaScheme | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.2 |
| cienaCesPmAlertTcaLastTcaTime The time and date of the last Alert TCA for the PM instance.
An empty string is returned if no Alert TCAs have occurred for
the PM instance. | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.20 |
| cienaCesPmAlertTcaLastTcaUnits The value of cienaCesPmAlertTcaUnits that was in use during
the last Alert TCA for the PM instance. | column | PmTcaUnits | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.21 |
| cienaCesPmAlertTcaLastTcaScheme The value of cienaCesPmAlertTcaScheme that was in use during
the last Alert TCA for the PM instance. | column | PmTcaScheme | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.22 |
| cienaCesPmAlertTcaLastTcaBasisValue The alert basis value that was in place when the last Alert
TCA event occurred. This refers to the value of
cienaCesPmAlertTcaBasis when the last Alert TCA occurred. | column | PmTcaUnsigned64 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.23 |
| cienaCesPmAlertTcaLastTcaThresholdType This object defines the way in which the value returned for
cienaCesPmAlertTcaLastTcaThresholdValue should be
interpreted. | column | PmTcaThresholdType | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.24 |
| cienaCesPmAlertTcaLastTcaThresholdValue The threshold value that was used in the last Alert TCA event.
This refers to the configured alert threshold as specified in
the interval profile associated with the PM instance w… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.25 |
| cienaCesPmAlertTcaLastTcaBoundaryValue The threshold boundary value which was reached or exceeded,
causing the last Alert TCA. This refers to the value of
cienaCesPmAlertTcaBoundaryValue when the last Alert TCA
occurr… | column | PmTcaUnsigned64 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.26 |
| cienaCesPmAlertTcaLastTcaWatermarkTime The time and date that the watermark value used in the last
Alert TCA was derived. An empty string is returned if no
Alert TCAs have occurred for the PM instance. | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.27 |
| cienaCesPmAlertTcaLastTcaWatermarkType The type of watermark that was used in the logic that caused
the last Alert TCA event for the PM instance. This refers to
the watermark value reported by the
cienaCesPmAlertTcaLa… | column | PmTcaWatermarkType | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.28 |
| cienaCesPmAlertTcaLastTcaWatermarkStats The statistic(s) which were used by the Alert TCA feature to
establish the watermark value identified by the
cienaCesPmAlertTcaLastTcaWatermarkValue object. This refers
to the va… | column | PmStatBitmap | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.29 |
| cienaCesPmAlertTcaStats The statistic(s) used by the PM instance, subject to the
Alert TCA feature. The PM profile is identified by the
cienaCesPmInstanceProfileType object in this same table row.
The P… | column | PmStatBitmap | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.3 |
| cienaCesPmAlertTcaLastTcaWatermarkValue The watermark value that was used in the logic that caused the
last Alert TCA event for the PM instance. This refers to the
value of cienaCesPmAlertTcaHighWatermarkValue when the… | column | PmTcaUnsigned64 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.30 |
| cienaCesPmAlertTcaLastTcaState The alert state that was in place during the last Alert TCA.
Alert TCA events occur whenever there are changes to the Alert
TCA state of the PM Instance. This object indicates wh… | column | PmTcaAlertState | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.31 |
| cienaCesPmAlertTcaConfigStatus This object indicates whether the Alert TCA configuration
attributes are configured in a way for periodic Alert TCA
state monitoring and reporting to occur on behalf of the PM
Ins… | column | PmTcaConfigStatus | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.4 |
| cienaCesPmAlertTcaBasisValue Base value against which the alert threshold is applied to
determine the boundary value that triggers an Alert TCA event.
Value is provided to PM from the component which manages … | column | PmTcaUnsigned64 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.5 |
| cienaCesPmAlertTcaBoundaryValue Boundary established by subtracting the value represented as
the alert threshold from the alert basis. Statistic readings
which are equal or greater than this boundary are subjec… | column | PmTcaUnsigned64 | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.6 |
| cienaCesPmAlertTcaIntervalStartTime The time and date representing when the current Alert Interval
has started. This value will update whenever the operational
state of the pm instance changes and whenever the aler… | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.7 |
| cienaCesPmAlertTcaIntervalEndTime The time and date representing when the current Alert Interval
will end. This value will update whenever the interval start
time changes. | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.8 |
| cienaCesPmAlertTcaSampleStartTime The time and date representing when the current sample
interval has started. | column | PmTimeDate | .1.3.6.1.4.1.1271.2.3.1.3.4.1.1.9 |