cienaCesMplsPwProtectionState

CIENA-CES-MPLS-MIB · .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43
MIB view Table view

Object

column Enumeration 
This represents the pseudowire protection state. It only applies to
those pseudowires in the protection bundle. For stand alone pseudowire
this has no meaning and is reflected as n/a in this object

Context

MIB
CIENA-CES-MPLS-MIB
OID
.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43
Type
column
Access
readonly
Status
current
Parent
cienaCesMplsPwEntry
Table
cienaCesMplsPwTable
Siblings
56

Syntax

Enumeration

Values & Constraints

Enumerated Values
1not-applicable
2active
3standby
4man-swo-active
5man-swo-standby
6pw-reversion-pending
7pw-activation-pending

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesMplsPwIndex
Unique index in the table.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.1
cienaCesMplsPwOutLabel
Indicates the outbound label of the pseudowire
columnInteger32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.10
cienaCesMplsPwStatusTlv
This represents whether the pseudowire status tlv is turned on or off
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.11
cienaCesMplsPwRefreshStatusIntvl
This represents the refresh interval for status tlv. This is only applicable for static Pseudowire. For dynamic Pseudowire this is displayed as 0.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.12
cienaCesMplsPwLocalFault
This represents the pseudowire local fault
columnVCStatus.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.13
cienaCesMplsPwRemoteFault
This represents the pseudowire remote fault
columnVCStatus.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.14
cienaCesMplsPwMtu
Indicates the pseudowire mtu
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.15
cienaCesMplsPwType
This represents the pseudowire type raw or tagged
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.16
cienaCesMplsPwMode
This represents the pseudowire mode whether it is mesh, spoke, or a MS-PW segment
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.17
cienaCesMplsPwCoSProfileName
This represents the cos profile name that is being used by pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18
cienaCesMplsPwCoSProfileIndex
This represents the index in cienaCesMplsPwCosProfile table
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.19
cienaCesMplsPwSignallingType
Specifies Pw signalling type
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.2
cienaCesMplsPwEgressL2PtTransform
This represents the pseudowire L2PT transform for classified L2 CFT control frames
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.20
cienaCesMplsPwVccVProfileName
This represents the vccv profile name that is being used by pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.21
cienaCesMplsPwVccVProfileIndex
This represents the index in cienaCesMplsPwVccvProfile table
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.22
cienaCesMplsPwLocalCcCv
This represents the CC/CV configured on the local pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.23
cienaCesMplsPwRemoteCcCv
This represents the CC/CV configured on the remote pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.24
cienaCesMplsPwOperatingCcCv
This represents the negotiated/operating CC/CV
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.25
cienaCesMplsPwBlocking
Specifies whether pseudowire is blocking or forwarding
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.26
cienaCesMplsPwVifIndex
This represents the Vif/tunnel group that is being used for the pseudowire
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.27
cienaCesMplsPwConfigTunnelName
This represents the configured transport tunnel name for the pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.28
cienaCesMplsPwConfigTunnelType
This represents the configured transport tunnel type for the pseudowire
columnTunnelType.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.29
cienaCesMplsPwId
This represents the unique id that is signalled in LDP
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.3
cienaCesMplsPwConfigTunnelIndex
Specifies the configured transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.30
cienaCesMplsPwActiveTunnelName
This represents the active transport tunnel name for the pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.31
cienaCesMplsPwActiveTunnelType
This represents the active transport tunnel type for the pseudo wire. This would be the same as configured tunnel type
columnTunnelType.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.32
cienaCesMplsPwActiveTunnelIndex
Specifies the active transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.33
cienaCesMplsPwRole deprecated
This represents the pseudowire role whether it is a protecting or primary pseudowire
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.34
cienaCesMplsPwPrimaryPwName
This represents the primary pseudowire name if this is a secondary pseudowire
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.35
cienaCesMplsPwPrimaryPwIndex
This represents the primary pseudowire index in cienaCesMplsPw table if this is a secondary pseudowire
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.36
cienaCesMplsPwVsIndex
This represents the virtual switch index in the virtual switch MIB table
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.37
cienaCesServiceDelimiterVID deprecated
This represents the service delimiter VID. This object is valid only for 39XX and 51XX platforms
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.38
cienaCesServiceDelimiterTPID deprecated
This represents the service delimiter TPID. This object is valid only for 39XX and 51XX platforms
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.39
cienaCesMplsPwName
This represents the pseudowire name
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.4
cienaCesMplsPwReversion
This represents whether the Pseudowire Reversion is turned on or off. With the Reversion turned on, when the Primary Pseudowire has recovered from earlier failure, it will be held…
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.40
cienaCesMplsPwRevertTime
This represents the Reversion Hold-time(in seconds) on the Primary Pseudowire. When the Primary Pseudowire has recovered from earlier failure, it will be held down for the length …
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.41
cienaCesMplsPwProtectionRole
This represents the role of the pseudowire in a Protection bundle.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.42
cienaCesMplsPwVsName
This represents the virtual switch name to which the pseudowire is attached.
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.44
cienaCesMplsPwStatusQuery
This represents whether the pseudowire status query is enabled. With the status query enabled, the pseudowire is able to query the remote status when it comes up and the remote st…
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.45
cienaCesMplsMsPwPeerPwName
This represents the peer pseudowire name if this is a MS-PW.
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.46
cienaCesMplsMsPwPeerPwIndex
This represents the peer pseudowire index if this is a MS-PW.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.47
cienaCesMplsPwIdInRemoteFault
This represents the PW Id in the SP-PE TLV of the remote Status
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.48
cienaCesMplsLocalIpInRemoteFault
Local Ip address in the SP-PE TLV of the remote Status
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.49
cienaCesMplsPwCustomerName
This represents the customer name
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.5
cienaCesMplsRemoteIpInRemoteFault
Remote Ip address in the SP-PE TLV of the remote Status
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.50
cienaCesMplsPwFaultToNextHop
This represents the aggregated MS-PW faults sent to the next hop
columnVCStatus.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.51
cienaCesMplsPwIdInFaultToNextHop
This represents the PW Id in the SP-PE TLV sent to the next hop
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.52
cienaCesMplsLocalIpInFaultToNextHop
Local Ip address in the SP-PE TLV sent to the next hop
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.53
cienaCesMplsRemoteIpInFaultToNextHop
Remote Ip address in the SP-PE TLV sent to the next hop
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.54
cienaCesMplsPwConfigBandwidth
This represents the configured Bandwidth(in kbps) of pseudowire
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.55
cienaCesMplsPwOperBandwidth
This represents the operational Bandwidth(in kbps) of pseudowire
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.56
cienaCesMplsPwBandwidthState
This represents the Bandwidth state of pseudowire
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.57
cienaCesMplsPwAdminState
This represents the pseudowire administrative status
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.6
cienaCesMplsPwOperState
This represents the pseudowire operational status
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.7
cienaCesMplsPwPeerIpAddr
Peer Ip address of the pseudowire
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.8
cienaCesMplsPwInLabel
Indicates the inbound label of the pseudowire
columnInteger32.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.9