cienaCesMplsPwCoSProfileName
CIENA-CES-MPLS-MIB ·
.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18
Object
column
OctetString
This represents the cos profile name that is being used by pseudowire
Context
- MIB
- CIENA-CES-MPLS-MIB
- OID
.1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesMplsPwEntry
- Table
- cienaCesMplsPwTable
- Siblings
- 57
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesMplsPwIndex Unique index in the table. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.1 |
| cienaCesMplsPwOutLabel Indicates the outbound label of the pseudowire | column | Integer32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.10 |
| cienaCesMplsPwStatusTlv This represents whether the pseudowire status tlv is turned on or off | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.11 |
| cienaCesMplsPwRefreshStatusIntvl This represents the refresh interval for status tlv. This is only
applicable for static Pseudowire. For dynamic Pseudowire this is
displayed as 0. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.12 |
| cienaCesMplsPwLocalFault This represents the pseudowire local fault | column | VCStatus | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.13 |
| cienaCesMplsPwRemoteFault This represents the pseudowire remote fault | column | VCStatus | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.14 |
| cienaCesMplsPwMtu Indicates the pseudowire mtu | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.15 |
| cienaCesMplsPwType This represents the pseudowire type raw or tagged | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.16 |
| cienaCesMplsPwMode This represents the pseudowire mode whether it is mesh, spoke, or
a MS-PW segment | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.17 |
| cienaCesMplsPwCoSProfileName This represents the cos profile name that is being used by
pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18 |
| cienaCesMplsPwCoSProfileIndex This represents the index in cienaCesMplsPwCosProfile table | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.19 |
| cienaCesMplsPwSignallingType Specifies Pw signalling type | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.2 |
| cienaCesMplsPwEgressL2PtTransform This represents the pseudowire L2PT transform for
classified L2 CFT control frames | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.20 |
| cienaCesMplsPwVccVProfileName This represents the vccv profile name that is being used by
pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.21 |
| cienaCesMplsPwVccVProfileIndex This represents the index in cienaCesMplsPwVccvProfile table | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.22 |
| cienaCesMplsPwLocalCcCv This represents the CC/CV configured on the local pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.23 |
| cienaCesMplsPwRemoteCcCv This represents the CC/CV configured on the remote pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.24 |
| cienaCesMplsPwOperatingCcCv This represents the negotiated/operating CC/CV | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.25 |
| cienaCesMplsPwBlocking Specifies whether pseudowire is blocking or forwarding | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.26 |
| cienaCesMplsPwVifIndex This represents the Vif/tunnel group that is being used
for the pseudowire | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.27 |
| cienaCesMplsPwConfigTunnelName This represents the configured transport tunnel name
for the pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.28 |
| cienaCesMplsPwConfigTunnelType This represents the configured transport tunnel type
for the pseudowire | column | TunnelType | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.29 |
| cienaCesMplsPwId This represents the unique id that is signalled in LDP | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.3 |
| cienaCesMplsPwConfigTunnelIndex Specifies the configured transport tunnel index in one of the
cienaCesMplsTunnel/cienaCesGmplsTunnel tables for
the pseudowire | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.30 |
| cienaCesMplsPwActiveTunnelName This represents the active transport tunnel name
for the pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.31 |
| cienaCesMplsPwActiveTunnelType This represents the active transport tunnel type
for the pseudo wire. This would be the same as
configured tunnel type | column | TunnelType | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.32 |
| cienaCesMplsPwActiveTunnelIndex Specifies the active transport tunnel index in one of the
cienaCesMplsTunnel/cienaCesGmplsTunnel tables for
the pseudowire | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.33 |
| cienaCesMplsPwRole deprecated This represents the pseudowire role whether it is a
protecting or primary pseudowire | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.34 |
| cienaCesMplsPwPrimaryPwName This represents the primary pseudowire name if
this is a secondary pseudowire | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.35 |
| cienaCesMplsPwPrimaryPwIndex This represents the primary pseudowire index in
cienaCesMplsPw table if this is a secondary pseudowire | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.36 |
| cienaCesMplsPwVsIndex This represents the virtual switch index in the
virtual switch MIB table | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.37 |
| cienaCesServiceDelimiterVID deprecated This represents the service delimiter VID. This object
is valid only for 39XX and 51XX platforms | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.38 |
| cienaCesServiceDelimiterTPID deprecated This represents the service delimiter TPID. This object
is valid only for 39XX and 51XX platforms | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.39 |
| cienaCesMplsPwName This represents the pseudowire name | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.4 |
| cienaCesMplsPwReversion This represents whether the Pseudowire Reversion is turned on or off.
With the Reversion turned on, when the Primary Pseudowire has recovered
from earlier failure, it will be held… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.40 |
| cienaCesMplsPwRevertTime This represents the Reversion Hold-time(in seconds) on the Primary
Pseudowire. When the Primary Pseudowire has recovered from earlier
failure, it will be held down for the length … | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.41 |
| cienaCesMplsPwProtectionRole This represents the role of the pseudowire in a Protection bundle. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.42 |
| cienaCesMplsPwProtectionState This represents the pseudowire protection state. It only applies to
those pseudowires in the protection bundle. For stand alone pseudowire
this has no meaning and is reflected as … | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43 |
| cienaCesMplsPwVsName This represents the virtual switch name to which the pseudowire is
attached. | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.44 |
| cienaCesMplsPwStatusQuery This represents whether the pseudowire status query is enabled.
With the status query enabled, the pseudowire is able to query
the remote status when it comes up and the remote st… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.45 |
| cienaCesMplsMsPwPeerPwName This represents the peer pseudowire name if this is a MS-PW. | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.46 |
| cienaCesMplsMsPwPeerPwIndex This represents the peer pseudowire index if this is a MS-PW. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.47 |
| cienaCesMplsPwIdInRemoteFault This represents the PW Id in the SP-PE TLV of the remote Status | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.48 |
| cienaCesMplsLocalIpInRemoteFault Local Ip address in the SP-PE TLV of the remote Status | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.49 |
| cienaCesMplsPwCustomerName This represents the customer name | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.5 |
| cienaCesMplsRemoteIpInRemoteFault Remote Ip address in the SP-PE TLV of the remote Status | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.50 |
| cienaCesMplsPwFaultToNextHop This represents the aggregated MS-PW faults sent to the next hop | column | VCStatus | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.51 |
| cienaCesMplsPwIdInFaultToNextHop This represents the PW Id in the SP-PE TLV sent to the next hop | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.52 |
| cienaCesMplsLocalIpInFaultToNextHop Local Ip address in the SP-PE TLV sent to the next hop | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.53 |
| cienaCesMplsRemoteIpInFaultToNextHop Remote Ip address in the SP-PE TLV sent to the next hop | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.54 |
| cienaCesMplsPwConfigBandwidth This represents the configured Bandwidth(in kbps) of pseudowire | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.55 |
| cienaCesMplsPwOperBandwidth This represents the operational Bandwidth(in kbps) of pseudowire | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.56 |
| cienaCesMplsPwBandwidthState This represents the Bandwidth state of pseudowire | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.57 |
| cienaCesMplsPwAdminState This represents the pseudowire administrative status | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.6 |
| cienaCesMplsPwOperState This represents the pseudowire operational status | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.7 |
| cienaCesMplsPwPeerIpAddr Peer Ip address of the pseudowire | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.8 |
| cienaCesMplsPwInLabel Indicates the inbound label of the pseudowire | column | Integer32 | .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.9 |