cienaCesMplsDynamicIngressTunnelWeight
CIENA-CES-MPLS-MIB ·
.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3
Object
column
Integer32
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
Context
- MIB
- CIENA-CES-MPLS-MIB
- OID
.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesMplsDynamicIngressTunnelEntry
- Table
- cienaCesMplsDynamicIngressTunnelTable
- Siblings
- 31
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesMplsDynamicIngressTunnelIndex This represents the unique index in the table. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1 |
| cienaCesMplsDynamicIngressTunnelFrmCosPolicy deprecated Frame CoS policy of the dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10 |
| cienaCesMplsDynamicIngressTunnelFrmCosMapId deprecated The frame CoS map ID of the dynamic encap tunnel. This value is valid if the
frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This value
corresponds to the… | column | Integer32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11 |
| cienaCesMplsDynamicIngressTunnelFixedExp deprecated This object is deprecated and the new object to provide this information is
cienaCesMplsDynamicIngressTunnelFixedTC in this table. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12 |
| cienaCesMplsDynamicIngressTunnelSetupPriority Indicates the set up priority of the dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13 |
| cienaCesMplsDynamicIngressTunnelHoldPriority Indicates the holding priority of the dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14 |
| cienaCesMplsDynamicIngressTunnelRecordRoute Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15 |
| cienaCesMplsDynamicIngressTunnelFastRoute Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the
dynamic encap tunnel entry is created. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16 |
| cienaCesMplsDynamicIngressTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17 |
| cienaCesMplsDynamicIngressTunnelFixedTTL If the TTL policy for the dynamic encap tunnel is fixed, this object is
the TTL value. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18 |
| cienaCesMplsDynamicIngressTunnelPathIndex Index into the cienaCesmplsTunnelPathTable entry that
specifies the explicit route hops for this dynamic encap tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19 |
| cienaCesMplsDynamicIngressTunnelName This represents the dynamic encap tunnel name. | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2 |
| cienaCesMplsDynamicIngressTunnelPathName The path name corresponding to the pathIndex object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20 |
| cienaCesMplsDynamicIngressTunnelGrpIndex The group id of the tunnel group of which the dynamic encap tunnel is a member. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21 |
| cienaCesMplsDynamicIngressTunnelResourcePointer The OID must be one of the entries in mplsTunnelResourceTable. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23 |
| cienaCesMplsDynamicIngressTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24 |
| cienaCesMplsDynamicIngressTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group. | column | Integer32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25 |
| cienaCesMplsDynamicIngressTunnelBandwidthProfile This object represents the bandwidth profile attached to this tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26 |
| cienaCesMplsDynamicIngressTunnelPrimaryTunnelName deprecated This object represents the primary tunnel it is protecting,
if this is a backup tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27 |
| cienaCesMplsDynamicIngressTunnelFixedTC deprecated If the frame CoS policy for the dynamic encap tunnel is fixed, this value is used
for MPLS encapsulation. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28 |
| cienaCesMplsDynamicIngressTunnelProtectionRole specifies the protection role of the static encap tunnel | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.29 |
| cienaCesMplsDynamicIngressTunnelProtectionState specifies the protection status of the static encap tunnel | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.30 |
| cienaCesMplsDynamicIngressTunnelProtectionPartnerName This object represents the primary tunnel it is protecting,
if this is a backup tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.31 |
| cienaCesMplsDynamicIngressTunnelCosProfileIndex This object represents Cos profile index | column | Integer32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.32 |
| cienaCesMplsDynamicIngressTunnelCosProfileName Specifies the name of Cos profile | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.33 |
| cienaCesMplsDynamicIngressTunnelLspId A unique index within a tunnel group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4 |
| cienaCesMplsDynamicIngressTunnelNextHopIp Specifies the next hop IP address for the dynamic encap tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5 |
| cienaCesMplsDynamicIngressTunnelAdminState Specifies the administrative status of the dynamic encap tunnel. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6 |
| cienaCesMplsDynamicIngressTunnelOperState Specifies the operational status of the dynamic encap tunnel. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7 |
| cienaCesMplsDynamicIngressTunnelDestIpAddr Destination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel
inherits the IP address of the tunnel group. This object cannot be modified once th… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8 |
| cienaCesMplsDynamicIngressTunnelLabel Label for the dynamic encap tunnel. | column | Integer32 | .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9 |