cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointer

CIENA-CES-MPLS-MIB · .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27
MIB view Table view

Object

column obsolete SNMPv2-TCRowPointer 
The OID must be one of the entries in mplsTunnelResourceTable.

Context

MIB
CIENA-CES-MPLS-MIB
OID
.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27
Type
column
Access
readonly
Status
obsolete
Parent
cienaCesGmplsDynamicIngressCoroutedTunnelEntry
Table
cienaCesGmplsDynamicIngressCoroutedTunnelTable
Siblings
52

Syntax

SNMPv2-TCRowPointer
Source
SNMPv2-TCRowPointer
Base type
ObjectIdentifier

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesGmplsDynamicIngressCoroutedTunnelIndex obsolete
Unique index in the table.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRole obsolete
The label for the Dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerName obsolete
Protection partner name of the Dynamic encap tunnel.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionState obsolete
Specifies the Protection status of the Dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12
cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicy obsolete
Specifies whether TTL is fixed or inherited from the frame.
columnTTLPolicy.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13
cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTL obsolete
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14
cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndex obsolete
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15
cienaCesGmplsDynamicIngressCoroutedTunnelReversion obsolete
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16
cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeout obsolete
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndex obsolete
This object represents Cos profile index
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileName obsolete
Specifies the name of Cos profile
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19
cienaCesGmplsDynamicIngressCoroutedTunnelName obsolete
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2
cienaCesGmplsDynamicIngressCoroutedTunnelRecordRoute obsolete
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20
cienaCesGmplsDynamicIngressCoroutedTunnelFastRoute obsolete
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21
cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority obsolete
Indicates the set up priority of the dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22
cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriority obsolete
Indicates the holding priority of the dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23
cienaCesGmplsDynamicIngressCoroutedTunnelPathIndex obsolete
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24
cienaCesGmplsDynamicIngressCoroutedTunnelPathName obsolete
The path name corresponding to the pathIndex object.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25
cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfile obsolete
This object represents the bandwidth profile attached to this tunnel.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26
cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoring obsolete
Specifies status of BFD monitoring.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileName obsolete
This object represent BFD profile name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29
cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIp obsolete
Specifies the next hop IP address for the Dynamic encap tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionName obsolete
Specifies BFD session name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaulted obsolete
Indicates if BFD is faulted.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndex obsolete
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32
cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnable obsolete
Indicates if auto-backup is enabled for this tunnel and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33
cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimization obsolete
Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.
columnMplsGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34
cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval obsolete
Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointType obsolete
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
columnPathDisjointType.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointMode obsolete
Indicates mode used for path diversification for this tunnel .
columnPathDisjointMode.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnable obsolete
Indicates if auto-size is enabled for this tunnel.
columnMplsGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeInterval obsolete
Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39
cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddr obsolete
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dyn…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlr obsolete
Indicates auto-sizing failure handler for this tunnel.
columnAutoSizeFailHdlr.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeState obsolete
Indicates dynamic auto-sizing states for this tunnel.
columnAutoSizeState.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeMode obsolete
Indicates auto-sizing mode for this tunnel.
columnAutoSizeMode.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42
cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidth obsolete
Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnMPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43
cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidth obsolete
Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnMPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44
cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidth obsolete
Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnMPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45
cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidth obsolete
Indicates auto-size current bandwidth(in kbps) for this tunnel.
columnMPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46
cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidth obsolete
Indicates auto-size requested bandwidth(in kbps) for this tunnel.
columnMPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47
cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidth obsolete
Indicates auto-size used bandwidth(in kbps) for this tunnel.
columnMPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48
cienaCesGmplsDynamicIngressCoroutedTunnelClassType obsolete
Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49
cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddr obsolete
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once th…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAll obsolete
Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAny obsolete
Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51
cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAny obsolete
Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52
cienaCesGmplsDynamicIngressCoroutedLspId
Indicates the Ingress LSP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53
cienaCesGmplsDynamicIngressCoroutedTunnelAdminState obsolete
Specifies the administrative status of the Dynamic encap tunnel.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6
cienaCesGmplsDynamicIngressCoroutedTunnelOperState obsolete
Specifies the operational status of the Dynamic encap tunnel.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7
cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabel obsolete
The label for the Dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8
cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabel obsolete
The label for the Dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9