cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointType
CIENA-CES-MPLS-MIB ·
.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36
Object
column
obsolete
PathDisjointType
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
Context
- MIB
- CIENA-CES-MPLS-MIB
- OID
.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- cienaCesGmplsDynamicIngressCoroutedTunnelEntry
- Table
- cienaCesGmplsDynamicIngressCoroutedTunnelTable
- Siblings
- 52
Syntax
PathDisjointType
- Source
- PathDisjointType
- Base type
Enumeration
Values & Constraints
Type Values
1 | unknown |
2 | none |
3 | link |
4 | srlg |
5 | node |
6 | srlgAndNode |
7 | srlgOrNode |
8 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesGmplsDynamicIngressCoroutedTunnelIndex obsolete Unique index in the table. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1 |
| cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRole obsolete The label for the Dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10 |
| cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerName obsolete Protection partner name of the Dynamic encap tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11 |
| cienaCesGmplsDynamicIngressCoroutedTunnelProtectionState obsolete Specifies the Protection status of the Dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12 |
| cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicy obsolete Specifies whether TTL is fixed or inherited from the frame. | column | TTLPolicy | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13 |
| cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTL obsolete If the TTL policy for the Dynamic encap tunnel is fixed, then this object is
the TTL value. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14 |
| cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndex obsolete The group ID of the tunnel group of which the Dynamic encap tunnel is a member. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15 |
| cienaCesGmplsDynamicIngressCoroutedTunnelReversion obsolete Indicates whether tunnel reversion is turned on/off for this encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16 |
| cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeout obsolete This object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17 |
| cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndex obsolete This object represents Cos profile index | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18 |
| cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileName obsolete Specifies the name of Cos profile | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19 |
| cienaCesGmplsDynamicIngressCoroutedTunnelName obsolete This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic. | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2 |
| cienaCesGmplsDynamicIngressCoroutedTunnelRecordRoute obsolete Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20 |
| cienaCesGmplsDynamicIngressCoroutedTunnelFastRoute obsolete Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the
dynamic encap tunnel entry is created. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21 |
| cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority obsolete Indicates the set up priority of the dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22 |
| cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriority obsolete Indicates the holding priority of the dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23 |
| cienaCesGmplsDynamicIngressCoroutedTunnelPathIndex obsolete Index into the cienaCesmplsTunnelPathTable entry that
specifies the explicit route hops for this dynamic encap tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24 |
| cienaCesGmplsDynamicIngressCoroutedTunnelPathName obsolete The path name corresponding to the pathIndex object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25 |
| cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfile obsolete This object represents the bandwidth profile attached to this tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26 |
| cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointer obsolete The OID must be one of the entries in mplsTunnelResourceTable. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27 |
| cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoring obsolete Specifies status of BFD monitoring. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28 |
| cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileName obsolete This object represent BFD profile name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29 |
| cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIp obsolete Specifies the next hop IP address for the Dynamic encap tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3 |
| cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionName obsolete Specifies BFD session name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30 |
| cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaulted obsolete Indicates if BFD is faulted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31 |
| cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndex obsolete This represents the BFD profile index in the BFD profile table
configured for this gmpls dynamic ingress corouted tunnel | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnable obsolete Indicates if auto-backup is enabled for this tunnel and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33 |
| cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimization obsolete Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel. | column | MplsGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34 |
| cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval obsolete Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and
always remains 0 in case of backup tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35 |
| cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointMode obsolete Indicates mode used for path diversification for this tunnel . | column | PathDisjointMode | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnable obsolete Indicates if auto-size is enabled for this tunnel. | column | MplsGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeInterval obsolete Indicates auto-sizing interval(in minutes) for this tunnel and
always remains 0 in case of backup tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39 |
| cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddr obsolete Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the Dyn… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlr obsolete Indicates auto-sizing failure handler for this tunnel. | column | AutoSizeFailHdlr | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeState obsolete Indicates dynamic auto-sizing states for this tunnel. | column | AutoSizeState | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeMode obsolete Indicates auto-sizing mode for this tunnel. | column | AutoSizeMode | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42 |
| cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidth obsolete Indicates auto-size minimum bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel. | column | MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43 |
| cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidth obsolete Indicates auto-size maximum bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel. | column | MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44 |
| cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidth obsolete Indicates auto-size increment bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel. | column | MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45 |
| cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidth obsolete Indicates auto-size current bandwidth(in kbps) for this tunnel. | column | MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46 |
| cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidth obsolete Indicates auto-size requested bandwidth(in kbps) for this tunnel. | column | MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47 |
| cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidth obsolete Indicates auto-size used bandwidth(in kbps) for this tunnel. | column | MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48 |
| cienaCesGmplsDynamicIngressCoroutedTunnelClassType obsolete Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49 |
| cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddr obsolete Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once th… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5 |
| cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAll obsolete Resource affinity Admin Color-Group which is applied in
include-all colors mode to constrain path selection and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50 |
| cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAny obsolete Resource affinity Admin Color-Group which is applied in
include-any colors mode to constrain path selection and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51 |
| cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAny obsolete Resource affinity Admin Color-Group which is applied in
exclude-any colors mode to constrain path selection and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52 |
| cienaCesGmplsDynamicIngressCoroutedLspId Indicates the Ingress LSP ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53 |
| cienaCesGmplsDynamicIngressCoroutedTunnelAdminState obsolete Specifies the administrative status of the Dynamic encap tunnel. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6 |
| cienaCesGmplsDynamicIngressCoroutedTunnelOperState obsolete Specifies the operational status of the Dynamic encap tunnel. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7 |
| cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabel obsolete The label for the Dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8 |
| cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabel obsolete The label for the Dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9 |