cienaCesGmplsDynamicIngressCoroutedExtTunnelReversionTimeout

CIENA-CES-MPLS-MIB · .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.18
MIB view Table view

Object

column seconds Unsigned32 
This object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.

Context

MIB
CIENA-CES-MPLS-MIB
OID
.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.18
Type
column
Access
readonly
Status
current
Units
seconds
Parent
cienaCesGmplsDynamicIngressCoroutedExtTunnelEntry
Table
cienaCesGmplsDynamicIngressCoroutedExtTunnelTable
Siblings
53

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints
range: 1-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesGmplsDynamicIngressCoroutedExtTunnelLspId
A unique LspId within a tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.1
cienaCesGmplsDynamicIngressCoroutedExtTunnelReverseInLabel
The label for the Dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.10
cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionRole
The label for the Dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.11
cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionPartName
Protection partner name of the Dynamic encap tunnel.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.12
cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionState
Specifies the Protection status of the Dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.13
cienaCesGmplsDynamicIngressCoroutedExtTunnelTTLPolicy
Specifies whether TTL is fixed or inherited from the frame.
columnTTLPolicy.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.14
cienaCesGmplsDynamicIngressCoroutedExtTunnelFixedTTL
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.15
cienaCesGmplsDynamicIngressCoroutedExtTunnelGrpIndex
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.16
cienaCesGmplsDynamicIngressCoroutedExtTunnelReversion
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.17
cienaCesGmplsDynamicIngressCoroutedExtTunnelCosProfileIndex
This object represents Cos profile index
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.19
cienaCesGmplsDynamicIngressCoroutedExtTunnelIndex
Unique index in the table.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.2
cienaCesGmplsDynamicIngressCoroutedExtTunnelCosProfileName
Specifies the name of Cos profile
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.20
cienaCesGmplsDynamicIngressCoroutedExtTunnelRecordRoute
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.21
cienaCesGmplsDynamicIngressCoroutedExtTunnelFastRoute
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.22
cienaCesGmplsDynamicIngressCoroutedExtTunnelSetupPriority
Indicates the set up priority of the dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.23
cienaCesGmplsDynamicIngressCoroutedExtTunnelHoldPriority
Indicates the holding priority of the dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.24
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathIndex
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.25
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathName
The path name corresponding to the pathIndex object.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.26
cienaCesGmplsDynamicIngressCoroutedExtTunnelBandwidthProfile
This object represents the bandwidth profile attached to this tunnel.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.27
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourcePointer
The OID must be one of the entries in mplsTunnelResourceTable.
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.28
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdMonitoring
Specifies status of BFD monitoring.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.29
cienaCesGmplsDynamicIngressCoroutedExtTunnelName
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.3
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdProfileName
This object represent BFD profile name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.30
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdSessionName
Specifies BFD session name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.31
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdSessionFaulted
Indicates if BFD is faulted,where 1 indicates fault.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.32
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdProfileIndex
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.33
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoBackupEnable
Indicates if auto-backup is enabled for this tunnel and always remains 0 in case of backup tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.34
cienaCesGmplsDynamicIngressCoroutedExtTunnelLspReoptimization
Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.
columnMplsGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.35
cienaCesGmplsDynamicIngressCoroutedExtTunnelLspReOptTimeInterval
Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.36
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathDisjointType
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
columnPathDisjointType.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.37
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathDisjointMode
Indicates mode used for path diversification for this tunnel .
columnPathDisjointMode.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.38
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeEnable
Indicates if auto-size is enabled for this tunnel.
columnMplsGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.39
cienaCesGmplsDynamicIngressCoroutedExtTunnelNextHopIp
Specifies the next hop IP address for the Dynamic encap tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.4
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeInterval
Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
columnminutes Unsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.40
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeFailureHdlr
Indicates auto-sizing failure handler for this tunnel.
columnAutoSizeFailHdlr.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.41
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeState
Indicates dynamic auto-sizing states for this tunnel.
columnAutoSizeState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.42
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeMode
Indicates auto-sizing mode for this tunnel.
columnAutoSizeMode.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.43
cienaCesGmplsDynamicIngressCoroutedExtTunnelMinBandwidth
Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.44
cienaCesGmplsDynamicIngressCoroutedExtTunnelMaxBandwidth
Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.45
cienaCesGmplsDynamicIngressCoroutedExtTunnelIncBandwidth
Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.46
cienaCesGmplsDynamicIngressCoroutedExtTunnelCurBandwidth
Indicates auto-size current bandwidth(in kbps) for this tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.47
cienaCesGmplsDynamicIngressCoroutedExtTunnelReqBandwidth
Indicates auto-size requested bandwidth(in kbps) for this tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.48
cienaCesGmplsDynamicIngressCoroutedExtTunnelUsedBandwidth
Indicates auto-size used bandwidth(in kbps) for this tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.49
cienaCesGmplsDynamicIngressCoroutedExtTunnelSrcIpAddr
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dyn…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.5
cienaCesGmplsDynamicIngressCoroutedExtTunnelClassType
Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.50
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceIncludeAll
Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.51
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceIncludeAny
Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.52
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceExcludeAny
Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.53
cienaCesGmplsDynamicIngressCoroutedArHopIndex
This object represents the ArHop index of this tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.54
cienaCesGmplsDynamicIngressCoroutedExtTunnelDestIpAddr
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once th…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.6
cienaCesGmplsDynamicIngressCoroutedExtTunnelAdminState
Specifies the administrative status of the Dynamic encap tunnel.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.7
cienaCesGmplsDynamicIngressCoroutedExtTunnelOperState
Specifies the operational status of the Dynamic encap tunnel.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.8
cienaCesGmplsDynamicIngressCoroutedExtTunnelForwardOutLabel
The label for the Dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.9