cienaCesGmplsDynamicIngressCoroutedExtTunnelBandwidthProfile
CIENA-CES-MPLS-MIB ·
.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.27
Object
column
SNMPv2-TCDisplayString
This object represents the bandwidth profile attached to this tunnel.
Context
- MIB
- CIENA-CES-MPLS-MIB
- OID
.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.27- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesGmplsDynamicIngressCoroutedExtTunnelEntry
- Table
- cienaCesGmplsDynamicIngressCoroutedExtTunnelTable
- Siblings
- 53
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesGmplsDynamicIngressCoroutedExtTunnelLspId A unique LspId within a tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.1 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelReverseInLabel The label for the Dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.10 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionRole The label for the Dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.11 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionPartName Protection partner name of the Dynamic encap tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.12 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionState Specifies the Protection status of the Dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.13 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame. | column | TTLPolicy | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.14 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelFixedTTL If the TTL policy for the Dynamic encap tunnel is fixed, then this object is
the TTL value. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.15 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelGrpIndex The group ID of the tunnel group of which the Dynamic encap tunnel is a member. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.16 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.17 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group. | column | seconds Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.18 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelCosProfileIndex This object represents Cos profile index | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.19 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelIndex Unique index in the table. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.2 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelCosProfileName Specifies the name of Cos profile | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.20 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelRecordRoute Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.21 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelFastRoute Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the
dynamic encap tunnel entry is created. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.22 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelSetupPriority Indicates the set up priority of the dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.23 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelHoldPriority Indicates the holding priority of the dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.24 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelPathIndex Index into the cienaCesmplsTunnelPathTable entry that
specifies the explicit route hops for this dynamic encap tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.25 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelPathName The path name corresponding to the pathIndex object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.26 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelResourcePointer The OID must be one of the entries in mplsTunnelResourceTable. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.28 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdMonitoring Specifies status of BFD monitoring. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.29 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelName This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic. | column | OctetString | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.3 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdProfileName This object represent BFD profile name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.30 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdSessionName Specifies BFD session name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.31 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdSessionFaulted Indicates if BFD is faulted,where 1 indicates fault. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.32 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdProfileIndex This represents the BFD profile index in the BFD profile table
configured for this gmpls dynamic ingress corouted tunnel | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.33 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoBackupEnable Indicates if auto-backup is enabled for this tunnel and
always remains 0 in case of backup tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.34 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelLspReoptimization Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel. | column | MplsGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.35 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelLspReOptTimeInterval Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and
always remains 0 in case of backup tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.36 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelPathDisjointType Indicates path diversification criteria used for this tunnel.
It can either be node based or srlg based or link based or combination. | column | PathDisjointType | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.37 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelPathDisjointMode Indicates mode used for path diversification for this tunnel . | column | PathDisjointMode | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.38 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeEnable Indicates if auto-size is enabled for this tunnel. | column | MplsGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.39 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelNextHopIp Specifies the next hop IP address for the Dynamic encap tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.4 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeInterval Indicates auto-sizing interval(in minutes) for this tunnel and
always remains 0 in case of backup tunnel. | column | minutes Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.40 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeFailureHdlr Indicates auto-sizing failure handler for this tunnel. | column | AutoSizeFailHdlr | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.41 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeState Indicates dynamic auto-sizing states for this tunnel. | column | AutoSizeState | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.42 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeMode Indicates auto-sizing mode for this tunnel. | column | AutoSizeMode | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.43 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelMinBandwidth Indicates auto-size minimum bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel. | column | kbps MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.44 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelMaxBandwidth Indicates auto-size maximum bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel. | column | kbps MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.45 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelIncBandwidth Indicates auto-size increment bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel. | column | kbps MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.46 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelCurBandwidth Indicates auto-size current bandwidth(in kbps) for this tunnel. | column | kbps MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.47 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelReqBandwidth Indicates auto-size requested bandwidth(in kbps) for this tunnel. | column | kbps MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.48 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelUsedBandwidth Indicates auto-size used bandwidth(in kbps) for this tunnel. | column | kbps MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.49 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelSrcIpAddr Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the Dyn… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.5 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelClassType Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.50 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceIncludeAll Resource affinity Admin Color-Group which is applied in
include-all colors mode to constrain path selection and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.51 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceIncludeAny Resource affinity Admin Color-Group which is applied in
include-any colors mode to constrain path selection and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.52 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceExcludeAny Resource affinity Admin Color-Group which is applied in
exclude-any colors mode to constrain path selection and
always remains 0 in case of backup tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.53 |
| cienaCesGmplsDynamicIngressCoroutedArHopIndex This object represents the ArHop index of this tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.54 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelDestIpAddr Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once th… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.6 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelAdminState Specifies the administrative status of the Dynamic encap tunnel. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.7 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelOperState Specifies the operational status of the Dynamic encap tunnel. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.8 |
| cienaCesGmplsDynamicIngressCoroutedExtTunnelForwardOutLabel The label for the Dynamic encap tunnel. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.9 |