cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoBackupEnable

CIENA-CES-MPLS-MIB · .1.3.6.1.4.1.1271.2.1.18.1.2.22.1.34
MIB view Table view

Object

column Unsigned32 
Indicates if auto-backup is enabled for this tunnel and 
always remains 0 in case of backup tunnel.

Context

MIB
CIENA-CES-MPLS-MIB
OID
.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.34
Type
column
Access
readonly
Status
current
Parent
cienaCesGmplsDynamicIngressCoroutedExtTunnelEntry
Table
cienaCesGmplsDynamicIngressCoroutedExtTunnelTable
Siblings
53

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-1

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesGmplsDynamicIngressCoroutedExtTunnelLspId
A unique LspId within a tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.1
cienaCesGmplsDynamicIngressCoroutedExtTunnelReverseInLabel
The label for the Dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.10
cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionRole
The label for the Dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.11
cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionPartName
Protection partner name of the Dynamic encap tunnel.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.12
cienaCesGmplsDynamicIngressCoroutedExtTunnelProtectionState
Specifies the Protection status of the Dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.13
cienaCesGmplsDynamicIngressCoroutedExtTunnelTTLPolicy
Specifies whether TTL is fixed or inherited from the frame.
columnTTLPolicy.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.14
cienaCesGmplsDynamicIngressCoroutedExtTunnelFixedTTL
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.15
cienaCesGmplsDynamicIngressCoroutedExtTunnelGrpIndex
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.16
cienaCesGmplsDynamicIngressCoroutedExtTunnelReversion
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.17
cienaCesGmplsDynamicIngressCoroutedExtTunnelReversionTimeout
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
columnseconds Unsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.18
cienaCesGmplsDynamicIngressCoroutedExtTunnelCosProfileIndex
This object represents Cos profile index
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.19
cienaCesGmplsDynamicIngressCoroutedExtTunnelIndex
Unique index in the table.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.2
cienaCesGmplsDynamicIngressCoroutedExtTunnelCosProfileName
Specifies the name of Cos profile
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.20
cienaCesGmplsDynamicIngressCoroutedExtTunnelRecordRoute
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.21
cienaCesGmplsDynamicIngressCoroutedExtTunnelFastRoute
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
columnEnumeration.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.22
cienaCesGmplsDynamicIngressCoroutedExtTunnelSetupPriority
Indicates the set up priority of the dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.23
cienaCesGmplsDynamicIngressCoroutedExtTunnelHoldPriority
Indicates the holding priority of the dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.24
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathIndex
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.25
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathName
The path name corresponding to the pathIndex object.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.26
cienaCesGmplsDynamicIngressCoroutedExtTunnelBandwidthProfile
This object represents the bandwidth profile attached to this tunnel.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.27
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourcePointer
The OID must be one of the entries in mplsTunnelResourceTable.
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.28
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdMonitoring
Specifies status of BFD monitoring.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.29
cienaCesGmplsDynamicIngressCoroutedExtTunnelName
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
columnOctetString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.3
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdProfileName
This object represent BFD profile name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.30
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdSessionName
Specifies BFD session name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.31
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdSessionFaulted
Indicates if BFD is faulted,where 1 indicates fault.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.32
cienaCesGmplsDynamicIngressCoroutedExtTunnelBfdProfileIndex
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.33
cienaCesGmplsDynamicIngressCoroutedExtTunnelLspReoptimization
Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.
columnMplsGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.35
cienaCesGmplsDynamicIngressCoroutedExtTunnelLspReOptTimeInterval
Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.36
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathDisjointType
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
columnPathDisjointType.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.37
cienaCesGmplsDynamicIngressCoroutedExtTunnelPathDisjointMode
Indicates mode used for path diversification for this tunnel .
columnPathDisjointMode.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.38
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeEnable
Indicates if auto-size is enabled for this tunnel.
columnMplsGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.39
cienaCesGmplsDynamicIngressCoroutedExtTunnelNextHopIp
Specifies the next hop IP address for the Dynamic encap tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.4
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeInterval
Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
columnminutes Unsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.40
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeFailureHdlr
Indicates auto-sizing failure handler for this tunnel.
columnAutoSizeFailHdlr.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.41
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeState
Indicates dynamic auto-sizing states for this tunnel.
columnAutoSizeState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.42
cienaCesGmplsDynamicIngressCoroutedExtTunnelAutoSizeMode
Indicates auto-sizing mode for this tunnel.
columnAutoSizeMode.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.43
cienaCesGmplsDynamicIngressCoroutedExtTunnelMinBandwidth
Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.44
cienaCesGmplsDynamicIngressCoroutedExtTunnelMaxBandwidth
Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.45
cienaCesGmplsDynamicIngressCoroutedExtTunnelIncBandwidth
Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.46
cienaCesGmplsDynamicIngressCoroutedExtTunnelCurBandwidth
Indicates auto-size current bandwidth(in kbps) for this tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.47
cienaCesGmplsDynamicIngressCoroutedExtTunnelReqBandwidth
Indicates auto-size requested bandwidth(in kbps) for this tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.48
cienaCesGmplsDynamicIngressCoroutedExtTunnelUsedBandwidth
Indicates auto-size used bandwidth(in kbps) for this tunnel.
columnkbps MPLS-TC-STD-MIBMplsBitRate.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.49
cienaCesGmplsDynamicIngressCoroutedExtTunnelSrcIpAddr
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dyn…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.5
cienaCesGmplsDynamicIngressCoroutedExtTunnelClassType
Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.50
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceIncludeAll
Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.51
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceIncludeAny
Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.52
cienaCesGmplsDynamicIngressCoroutedExtTunnelResourceExcludeAny
Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.53
cienaCesGmplsDynamicIngressCoroutedArHopIndex
This object represents the ArHop index of this tunnel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.54
cienaCesGmplsDynamicIngressCoroutedExtTunnelDestIpAddr
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once th…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.6
cienaCesGmplsDynamicIngressCoroutedExtTunnelAdminState
Specifies the administrative status of the Dynamic encap tunnel.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.7
cienaCesGmplsDynamicIngressCoroutedExtTunnelOperState
Specifies the operational status of the Dynamic encap tunnel.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.8
cienaCesGmplsDynamicIngressCoroutedExtTunnelForwardOutLabel
The label for the Dynamic encap tunnel.
columnUnsigned32.1.3.6.1.4.1.1271.2.1.18.1.2.22.1.9