cienaCesMcastIgmpSnoopRapidRecoveryMode

CIENA-CES-MCAST-FILTER-MIB · .1.3.6.1.4.1.1271.2.1.37.1.1.5.1.23
MIB view Table view

Object

column Enumeration 
Specifies whether the rapid recovery mode is set to on or off.
If this object is set to ON then the device generates and
accepts query packets with source IP = 0 else in the OFF state, it does not.

Context

MIB
CIENA-CES-MCAST-FILTER-MIB
OID
.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.23
Type
column
Access
readonly
Status
current
Parent
cienaCesMcastIgmpSnoopEntry
Table
cienaCesMcastIgmpSnoopTable
Siblings
37

Syntax

Enumeration

Values & Constraints

Enumerated Values
1on
2off

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesMcastIgmpSnoopEnable
This object represents admin state of IGMP snooping for a multicast service.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.1
cienaCesMcastIgmpRouterQueryInterval
This object represents the router query interval for the given multicast service.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.10
cienaCesMcastIgmpMinResponseTime
This object represents the minimum response time for the given multicast service.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.11
cienaCesMcastIgmpDefaultRouterInterfaceType
This object represents the default router interface type for the given multicast service.
columnInterfaceType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.12
cienaCesMcastIgmpDefaultRouterInterfaceId
This object represents the default router interface id for the given multicast service.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.13
cienaCesMcastIgmpInquisitiveLeaveState
This object represents the IGMP inquisitive leave state for the given multicast service.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.14
cienaCesMcastIgmpLastMemberQueryInterval
This object represents the last membership query interval for the given multicast service.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.15
cienaCesMcastIgmpPriority
This object represents the priority of IGMP packets for this multicast service.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.16
cienaCesMcastIgmpSnoopRouterRangeStartIpAddrType
The IP address type of first IP Address of the router IP Address range.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.17
cienaCesMcastIgmpSnoopRouterRangeStartIpAddr
The first IP Address of the router IP Address range.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.18
cienaCesMcastIgmpSnoopRouterRangeEndIpAddrType
The IP address type of the last IP Address of the router IP Address range.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.19
cienaCesMcastIgmpSnoopRobustness
The number of replies to send for each multicast group.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.2
cienaCesMcastIgmpSnoopRouterRangeEndIpAddr
The last IP Address of the router IP Address range. When range is undefined, all leave/join messages are forwarded to the router even when the multicast stream does not originat…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.20
cienaCesMcastIgmpSnoopActiveLingerTimeout
This object specifies the active linger timeout in seconds.
columnseconds Integer32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.21
cienaCesMcastIgmpSnoopServerTopology
This object specifies the server topology.
columnEnumeration.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.22
cienaCesMcastIgmpSnoopQuerierCompatibilityMode
This object specifies the query engine compatibility mode.
columnIgmpCompatibilityMode.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.24
cienaCesMcastIgmpSnoopForkMode
This object specifies whether IGMP Forking mode is set to on or off.
columnEnumeration.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.25
cienaCesMcastIgmpSnoopEnableOperState
This object represents the operational state of IGMP snooping on the given multicast service
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.26
cienaCesMcastRouterSrcMacAddr
Specifies the router's MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.27
cienaCesMcastRouterSrcIpAddrType
Specifies the router's IP address.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.28
cienaCesMcastRouterSrcIpAddr
Specifies the router's IP address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.29
cienaCesMcastIgmpSnoopProxyQueryInterval
The interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default value is 125 seconds. Note th…
columnseconds Integer32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.3
cienaCesMcastRouterInterfaceType
Specifies the interface type for the interface from where router queries are coming.
columnInterfaceType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.30
cienaCesMcastRouterInterfaceId
Specifies the interface Id of the interface from where router queries are coming.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.31
cienaCesMcastReportSendInterfaceType
The obejct specifies the interface type of the interface where IGMP reports are sent. Not always the same as the router interface.
columnInterfaceType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.32
cienaCesMcastReportSendInterfaceId
The obejct specifies the interface id of the interface where IGMP reports are sent. Not always the same as the router interface.
columnInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.33
cienaCesMcastRouterCompatibilityMode
This object specifies the IGMP version of the router.
columnIgmpCompatibilityMode.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.34
cienaCesMcastReportSendInterfaceIsMeshVc
Specifies whether the current report send interface is a meshvc or not.
columnEnumeration.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.35
cienaCesMcastIgmpQueryEngineOperState
This object represents query engine operational state for a given multicast service. Active when query-engine is enabled and active, inactive when query-engine is enabled and not…
columnEnumeration.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.36
cienaCesMcastRouterOlderVersionQuerierTimeRemaining
This object specifies the older version querier time remaining in seconds. This is only applicable when an external IGMP querier is present and an older version query is heard.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.37
cienaCesMcastRouterQueryIntervalTimeRemaining
This object specifies the query interval time remaining in seconds. This timer will not be applicable if value for object cienaCesMcastIgmpQueryEngineOperState is active.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.38
cienaCesMcastIgmpSnoopProxyQueryReplyTmo
The amount of time to receive a membership report after a query message is sent. This value goes directly into the query packet.
columnseconds Integer32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.4
cienaCesMcastIgmpSnoopProxyQueryDelay
The amount of time to wait before sending the next group specific query downstream. General queries are sent one interface at a time.
columnseconds Integer32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.5
cienaCesMcastIgmpSnoopLingerTmo
This value specifies the amount of time that a multicast filter is in place after the last host has left. In essence it configures how long to filter the stream after all the h…
columnseconds Integer32.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.6
cienaCesMcastIgmpQueryEngineState
This object represents query engine state for a given multicast service.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.7
cienaCesMcastIgmpProxyQuerySrcIpAddrType
This object represents the source IP address type for the multicast service.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.8
cienaCesMcastIgmpProxyQuerySrcIpAddr
This object represents the source IP address for the multicast service.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.1271.2.1.37.1.1.5.1.9