cienaCesCfmSyntheticLossSessionTestId
CIENA-CES-CFM-MIB ·
.1.3.6.1.4.1.1271.2.1.4.1.12.1.1.4
Object
column
Unsigned32
This object specifies the test ID of the SLM message.
Context
- MIB
- CIENA-CES-CFM-MIB
- OID
.1.3.6.1.4.1.1271.2.1.4.1.12.1.1.4- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- cienaCesCfmSyntheticLossSessionEntry
- Table
- cienaCesCfmSyntheticLossSessionTable
- Siblings
- 28
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesCfmSyntheticLossSessionServiceIndex This object specifies the service index of the SLM message. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.1 |
| cienaCesCfmSyntheticLossSessionRepeatDelay This object specifies the delay in minutes between consecutive test iterations. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.10 |
| cienaCesCfmSyntheticLossSessionFrameSize This object specifies the size in bytes of the CFM base frame.
If this object specifies zero there is no padding. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.11 |
| cienaCesCfmSyntheticLossSessionTimeout This object specifies the timeout interval in milliseconds within which
the source should receive a SLR for a corresponding SLM Msg. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.12 |
| cienaCesCfmSyntheticLossSessionDuration This object specifies the duration of time the test took in milliseconds to complete one iteration. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.13 |
| cienaCesCfmSyntheticLossSessionLossNearThreshold This object represents the Near Loss Threshold Fault for the Synthetic Loss Measurement test.
A value of -1 disables the generation of faults. A value of 0 or greater
is compared… | column | Integer32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.14 |
| cienaCesCfmSyntheticLossSessionLossFarThreshold This object represents the Far Loss Threshold Fault for the Synthetic Loss Measurement test.
A value of -1 disables the generation of faults. A value of 0 or greater
is compared t… | column | Integer32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.15 |
| cienaCesCfmSyntheticLossSessionNumSLMSent This object specifies the number of SLM messages sent in the latest test iteration. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.16 |
| cienaCesCfmSyntheticLossSessionNumSLRReceived This object specifies the number of SLR messages received in the latest test iteration. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.17 |
| cienaCesCfmSyntheticLossSessionFrameLossNear This object specifies the Near Loss Threshold in the latest test iteration. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.18 |
| cienaCesCfmSyntheticLossSessionFrameLossFar This object specifies the Far Loss Threshold in the latest test iteration. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.19 |
| cienaCesCfmSyntheticLossSessionLocalMEPId This object specifies the local mep id of the SLM message. | column | Integer32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.2 |
| cienaCesCfmSyntheticLossSessionAvgFrameLossNear This object specifies the average Near Loss Threshold of the test session. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.20 |
| cienaCesCfmSyntheticLossSessionMinFrameLossNear This object specifies the minimum Near Loss Threshold of the test session. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.21 |
| cienaCesCfmSyntheticLossSessionMaxFrameLossNear This object specifies the maximum Near Loss Threshold of the test session. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.22 |
| cienaCesCfmSyntheticLossSessionAvgFrameLossFar This object specifies the average Far Loss Threshold of the test session. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.23 |
| cienaCesCfmSyntheticLossSessionMinFrameLossFar This object specifies the minimum Far Loss Threshold of the test session. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.24 |
| cienaCesCfmSyntheticLossSessionMaxFrameLossFar This object specifies the maximum Far Loss Threshold of the test session. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.25 |
| cienaCesCfmSyntheticLossSessionFrameLossRatioNear This object specifies the Frame Loss Ratio in percentile of loss at Nearend in the last
iteration of the completed test. | column | CfmFrameLossRatio | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.26 |
| cienaCesCfmSyntheticLossSessionFrameLossRatioFar This object specifies the Frame Loss Ratio in percentile of loss at Farend in the last
iteration of the completed test. | column | CfmFrameLossRatio | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.27 |
| cienaCesCfmSyntheticLossSessionSdSetThreshold This object represents the signal degrade set threshold value for the synthetic loss measurement test.
A value of 0 or greater is compared to the frame loss result and fault is s… | column | Integer32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.28 |
| cienaCesCfmSyntheticLossSessionSdClearThreshold This object represents the signal degrade clear threshold value for the synthetic loss measurement test.
A value of 0 or greater is compared to the frame loss result and a fault … | column | Integer32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.29 |
| cienaCesCfmSyntheticLossSessionTargetMEPId This object specifies the target mepid of the SLM message. | column | Integer32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.3 |
| cienaCesCfmSyntheticLossSessionServiceName This object specifies the service name of the SLM message. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.5 |
| cienaCesCfmSyntheticLossSessionPriority This object specifies the priority that will be encoded in the SLM message. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.6 |
| cienaCesCfmSyntheticLossSessionCount This object specifies the number of SLM messages that will be transmitted during this session. | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.7 |
| cienaCesCfmSyntheticLossSessionSLMInterval This object specifies the message interval at which SLMs will be transmitted.
The values 3-7 represent indices to CFM intervals as follows:
3 --> 100ms,
4… | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.8 |
| cienaCesCfmSyntheticLossSessionIterations This object specifies the number of iterations the test
has to be conducted. Each test iteration is defined by <cienaCesCfmSyntheticLossMsgSLMInterval,
cienaCesCfmSyntheticLossMsg… | column | Unsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.9 |